ntnu-arl / gbplanner_ws Goto Github PK
View Code? Open in Web Editor NEWSimulation workspace for gbplanner_ros package
Simulation workspace for gbplanner_ros package
Hi
Thank you for sharing your work. It's impressive!
I successfully built the gbplanner package on Ubuntu 18.04 (ROS melodic). I'm facing an issue while running the planner. The following message appears after generating the first path and the vehicle starts tracking it, then the vehicle stops and the message appears:
[pci_mav_ros_node-16] process has died [pid 16911, exit code -6, cmd /home/---/gbplanner_ws/devel/lib/pci_mav/pci_mav_ros_node command/trajectory:=m100/command/trajectory planner_server:=gbplanner planner_homing_server:=gbplanner/homing odometry:=m100/ground_truth/odometry_throttled __name:=pci_mav_ros_node __log:=/home/---/.ros/log/da3a5dde-dd94-11ea-ac1a-0433c2f441b5/pci_mav_ros_node-16.log].
log file: /home/---/.ros/log/da3a5dde-dd94-11ea-ac1a-0433c2f441b5/pci_mav_ros_node-16*.log
I would appreciate any help to resolve this issue.
Best regards,
Younes
I followed these instruction in https://github.com/ntnu-arl/gbplanner_ws and https://github.com/ntnu-arl/gbplanner_ros/tree/master.
I compile the gbplanner1 successfully.
However,the gbplanner1 seems to didn't work.The MAV keeps on hovering around the starting point and not going forward.
The interface of rviz is as follows:
The screenshot of the terminal is as follows:
The terminal says the planner cannot found any feasible path and point is out of OcTree bounds.
Can you please tell me where is the problem?
Looking forward to your reply!
Hi, I tried out this planner following the instruction here(https://www.autonomousrobotslab.com/subt-edu.html), but when I launched the system, I don't see the grid_map that pops up in the YouTube video at [0:22]. And therefore the robot does not start exploration.
(the pic is the screenshot of rviz a few minutes later the roslaunch). Can you educate me on how can I avoid/fix this ?
Hello, guys.
This workspace seems to call different versions of protobuf.
The simulator of Gazebo in Ubuntu 18.04 calls protobuf v3.0.0;
The voxblox calls version >=v3.7( I don't know which one yet, I have v3.9.0, and it doesn't match and return build errors.)
Other packages...
Is this situation caused by newer version of voxblox and other packages?
Can somebody tell what should be the right versions of them?
And even better, make them all call protobuf v3.0.0, or else this workspace just can't work as simple as one catkin command.
Hi, thanks for all the amazing work. I just wanted to point out that there were 2 caveats when following the current instructions on building the repository. First of all, it must be cloned via ssh, not https since the packages.rosinstall
file uses git ssh specific URLs.
That aside, the glog_catkin
package specified in the packages.rosinstall
does not exist under the unr-arl organization. I am guessing it is referring to this package instead. Otherwise, I was able to build the repo / workspace successfully. Just a note in case this can help someone. Thanks.
Hello!
First of all I want to say that I think itβs an impressive job, and I wanted to congratulate you.
I have been able to run the code perfectly on my computer using the simulation with gazebo as you propose. But in order to be able to use it with a real UAV I have some doubt about what steps it should take.
As I understand the algorithms of mapping, path-planning and exploration, you already provide them in this example but:
Another additional question is if you have implemented the code to just move the UAV to a desired position without collisions. I found the service /pci_to_waypoint to move the robot, but if I used directly this service the UAV is going to crash because the path planning is skipped.
Best regards,
Emilio
This is a interest job and I want to operator on my Jackal, But lots of param I dont know how to set.Could you please open the params on the real robot?
A declarative, efficient, and flexible JavaScript library for building user interfaces.
π Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. πππ
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google β€οΈ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.