Code Monkey home page Code Monkey logo

proxmark3-web's Issues

MAKE client/install failed

I am attempting to install and run a proxmark 3 RDV2 from a Raspberry Pi 3 Model B with full Buster install.
When I run the command: sudo make clean && make all I get the following error during the [*] MAKE client/all:

src/cmdhfmfhard.c: 26: 19: fatal error: bzlib.h: no such file or directory
#include <bzlib.h>
^
compilation terminated
Makefile: 686: recipe for target 'obj/cmdhfmfhard.o' failed
make[1]: *** [obj/cmdhfmfhard.o] Error 1
Makefile: 136: recipe for target 'client/all' failed
make: *** [client/all] Error 2

Could someone help resolve this issue? Thanks in advance.

issues with rpi-setup.sh

Getting a few issues with ./install-all.sh. After running it I get the below error output

[@] Installing common resources to /usr/local...
./rpi-setup.sh: line 5: /tmp/dhcpcd.conf: Permission denied
dnsmasq.service is not active, cannot reload.
What do you want your Wifi Password to be?:[wifi-password]
./rpi-setup.sh: line 29: wireless_password: command not found
Removed /etc/systemd/system/hostapd.service.
Synchronizing state of hostapd.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable hostapd
Job for hostapd.service failed because the control process exited with error code.
See "systemctl status hostapd.service" and "journalctl -xe" for details.
Created symlink /etc/systemd/system/multi-user.target.wants/proxmark3-web.service → /etc/systemd/system/proxmark3-web.service.

Tried to fix with sudo'ing the rpi-setup script, and still got errors:

pi@raspberrypi:~/proxmark3-web $ sudo ./rpi-setup.sh
dnsmasq.service is not active, cannot reload.
What do you want your Wifi Password to be?:[wifi-password]
./rpi-setup.sh: line 29: wireless_password: command not found
Synchronizing state of hostapd.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable hostapd
Job for hostapd.service failed because the control process exited with error code.
See "systemctl status hostapd.service" and "journalctl -xe" for details.

I am on the latest version of Raspbian Buster September 2019 (lite), fresh install, updated.

Full output of install:

pi@raspberrypi:~/proxmark3-web $ ./install-all.sh
Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
build-essential is already the newest version (12.6).
ca-certificates is already the newest version (20190110).
git is already the newest version (1:2.20.1-2+deb10u1).
pkg-config is already the newest version (0.29-6).
The following additional packages will be installed:
  binutils-arm-none-eabi dnsmasq-base libev4 libncurses-dev libncurses6 libncursesw6 libtinfo6 python-pip-whl python3-click python3-colorama
  python3-distutils python3-gunicorn python3-itsdangerous python3-jinja2 python3-lib2to3 python3-markupsafe python3-regex python3-setuptools
  python3-sqlalchemy python3-tz python3-tzlocal python3-werkzeug
Suggested packages:
  gunicorn-examples python3-pastedeploy python3-setproctitle python3-tornado ncurses-doc libnewlib-arm-none-eabi readline-doc python-flask-doc
  python-jinja2-doc python-setuptools-doc python-sqlalchemy-doc python3-psycopg2 python3-mysqldb python3-fdb ipython3 python3-lxml python3-termcolor
  python3-watchdog python-werkzeug-doc
Recommended packages:
  dns-root-data libnewlib-arm-none-eabi python3-blinker python3-simplejson python3-dev python3-wheel python3-sqlalchemy-ext python3-openssl
  python3-pyinotify
The following NEW packages will be installed:
  binutils-arm-none-eabi dnsmasq dnsmasq-base gcc-arm-none-eabi gunicorn3 hostapd libev-dev libev4 libncurses-dev libnewlib-dev libreadline-dev
  python-pip-whl python3-click python3-colorama python3-dateparser python3-dateutil python3-distutils python3-flask python3-flask-sqlalchemy
  python3-gunicorn python3-itsdangerous python3-jinja2 python3-lib2to3 python3-markupsafe python3-pip python3-regex python3-setuptools python3-sqlalchemy
  python3-tz python3-tzlocal python3-werkzeug
The following packages will be upgraded:
  libncurses6 libncursesw6 libtinfo6
3 upgraded, 31 newly installed, 0 to remove and 59 not upgraded.
Need to get 33.8 MB of archives.
After this operation, 534 MB of additional disk space will be used.
Get:1 http://archive.raspberrypi.org/debian buster/main armhf dnsmasq-base armhf 2.80-1+rpt1 [400 kB]
Get:2 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf hostapd armhf 2:2.7+git20190128+0c1e29f-6+deb10u1 [630 kB]
Get:6 http://mirrors.syringanetworks.net/raspbian/raspbian buster/main armhf binutils-arm-none-eabi armhf 2.31.1-11+rpi1+11 [2,006 kB]
Get:11 http://raspbian-us.ngc292.space/raspbian buster/main armhf python3-gunicorn all 19.9.0-1 [88.4 kB]
Get:20 http://raspbian.mirror.constant.com/raspbian buster/main armhf python3-dateutil all 2.7.3-3 [64.5 kB]
Get:23 http://raspbian-us.ngc292.space/raspbian buster/main armhf python3-tzlocal all 1.5.1-1 [16.4 kB]
Get:22 http://raspbian.mirror.constant.com/raspbian buster/main armhf python3-tz all 2019.1-1 [27.1 kB]
Get:25 http://mirror.us.leaseweb.net/raspbian/raspbian buster/main armhf python3-itsdangerous all 0.24+dfsg1-2 [13.0 kB]
Get:29 http://raspbian.mirror.constant.com/raspbian buster/main armhf python3-flask all 1.0.2-3 [93.0 kB]
Get:3 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [78.9 kB]
Get:4 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf libtinfo6 armhf 6.1+20181013-2+deb10u2 [312 kB]
Get:5 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf libncursesw6 armhf 6.1+20181013-2+deb10u2 [103 kB]
Get:32 http://archive.raspberrypi.org/debian buster/main armhf dnsmasq all 2.80-1+rpt1 [16.5 kB]
Get:33 http://archive.raspberrypi.org/debian buster/main armhf python-pip-whl all 18.1-5+rpt1 [1,591 kB]
Get:7 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf gcc-arm-none-eabi armhf 15:7-2018-q2-6 [25.3 MB]
Get:21 http://mirrors.syringanetworks.net/raspbian/raspbian buster/main armhf python3-regex armhf 0.1.20190207-1 [231 kB]
Get:28 http://mirrors.syringanetworks.net/raspbian/raspbian buster/main armhf python3-werkzeug all 0.14.1+dfsg1-4+deb10u1 [196 kB]
Get:34 http://archive.raspberrypi.org/debian buster/main armhf python3-pip all 18.1-5+rpt1 [171 kB]
Get:8 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-lib2to3 all 3.7.3-1 [76.7 kB]
Get:9 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-distutils all 3.7.3-1 [142 kB]
Get:10 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-setuptools all 40.8.0-1 [306 kB]
Get:12 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf gunicorn3 all 19.9.0-1 [17.6 kB]
Get:13 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf libev4 armhf 1:4.25-1 [34.5 kB]
Get:14 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf libev-dev armhf 1:4.25-1 [125 kB]
Get:15 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf libncurses-dev armhf 6.1+20181013-2+deb10u2 [278 kB]
Get:16 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf libnewlib-dev all 3.1.0.20181231-1 [259 kB]
Get:17 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf libreadline-dev armhf 7.0-5 [110 kB]
Get:18 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-colorama all 0.3.7-1 [18.1 kB]
Get:19 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-click all 7.0-1 [73.6 kB]
Get:24 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-dateparser all 0.7.1-1 [168 kB]
Get:26 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-markupsafe armhf 1.1.0-1 [14.4 kB]
Get:27 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-jinja2 all 2.10-2 [106 kB]
Get:30 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-sqlalchemy all 1.2.18+ds1-2 [727 kB]
Get:31 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-flask-sqlalchemy all 2.1-3 [13.7 kB]
Fetched 33.8 MB in 7min 59s (70.6 kB/s)
apt-listchanges: Reading changelogs...
Extracting templates from packages: 100%
Selecting previously unselected package hostapd.
(Reading database ... 40741 files and directories currently installed.)
Preparing to unpack .../hostapd_2%3a2.7+git20190128+0c1e29f-6+deb10u1_armhf.deb ...
Unpacking hostapd (2:2.7+git20190128+0c1e29f-6+deb10u1) ...
Preparing to unpack .../libncurses6_6.1+20181013-2+deb10u2_armhf.deb ...
Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) over (6.1+20181013-2+deb10u1) ...
Preparing to unpack .../libtinfo6_6.1+20181013-2+deb10u2_armhf.deb ...
Unpacking libtinfo6:armhf (6.1+20181013-2+deb10u2) over (6.1+20181013-2+deb10u1) ...
Setting up libtinfo6:armhf (6.1+20181013-2+deb10u2) ...
(Reading database ... 40767 files and directories currently installed.)
Preparing to unpack .../libncursesw6_6.1+20181013-2+deb10u2_armhf.deb ...
Unpacking libncursesw6:armhf (6.1+20181013-2+deb10u2) over (6.1+20181013-2+deb10u1) ...
Setting up libncursesw6:armhf (6.1+20181013-2+deb10u2) ...
Selecting previously unselected package binutils-arm-none-eabi.
(Reading database ... 40767 files and directories currently installed.)
Preparing to unpack .../00-binutils-arm-none-eabi_2.31.1-11+rpi1+11_armhf.deb ...
Unpacking binutils-arm-none-eabi (2.31.1-11+rpi1+11) ...
Selecting previously unselected package dnsmasq-base.
Preparing to unpack .../01-dnsmasq-base_2.80-1+rpt1_armhf.deb ...
Unpacking dnsmasq-base (2.80-1+rpt1) ...
Selecting previously unselected package dnsmasq.
Preparing to unpack .../02-dnsmasq_2.80-1+rpt1_all.deb ...
Unpacking dnsmasq (2.80-1+rpt1) ...
Selecting previously unselected package gcc-arm-none-eabi.
Preparing to unpack .../03-gcc-arm-none-eabi_15%3a7-2018-q2-6_armhf.deb ...
Unpacking gcc-arm-none-eabi (15:7-2018-q2-6) ...
Selecting previously unselected package python3-lib2to3.
Preparing to unpack .../04-python3-lib2to3_3.7.3-1_all.deb ...
Unpacking python3-lib2to3 (3.7.3-1) ...
Selecting previously unselected package python3-distutils.
Preparing to unpack .../05-python3-distutils_3.7.3-1_all.deb ...
Unpacking python3-distutils (3.7.3-1) ...
Selecting previously unselected package python3-setuptools.
Preparing to unpack .../06-python3-setuptools_40.8.0-1_all.deb ...
Unpacking python3-setuptools (40.8.0-1) ...
Selecting previously unselected package python3-gunicorn.
Preparing to unpack .../07-python3-gunicorn_19.9.0-1_all.deb ...
Unpacking python3-gunicorn (19.9.0-1) ...
Selecting previously unselected package gunicorn3.
Preparing to unpack .../08-gunicorn3_19.9.0-1_all.deb ...
Unpacking gunicorn3 (19.9.0-1) ...
Selecting previously unselected package libev4:armhf.
Preparing to unpack .../09-libev4_1%3a4.25-1_armhf.deb ...
Unpacking libev4:armhf (1:4.25-1) ...
Selecting previously unselected package libev-dev.
Preparing to unpack .../10-libev-dev_1%3a4.25-1_armhf.deb ...
Unpacking libev-dev (1:4.25-1) ...
Selecting previously unselected package libncurses-dev:armhf.
Preparing to unpack .../11-libncurses-dev_6.1+20181013-2+deb10u2_armhf.deb ...
Unpacking libncurses-dev:armhf (6.1+20181013-2+deb10u2) ...
Selecting previously unselected package libnewlib-dev.
Preparing to unpack .../12-libnewlib-dev_3.1.0.20181231-1_all.deb ...
Unpacking libnewlib-dev (3.1.0.20181231-1) ...
Selecting previously unselected package libreadline-dev:armhf.
Preparing to unpack .../13-libreadline-dev_7.0-5_armhf.deb ...
Unpacking libreadline-dev:armhf (7.0-5) ...
Selecting previously unselected package python-pip-whl.
Preparing to unpack .../14-python-pip-whl_18.1-5+rpt1_all.deb ...
Unpacking python-pip-whl (18.1-5+rpt1) ...
Selecting previously unselected package python3-colorama.
Preparing to unpack .../15-python3-colorama_0.3.7-1_all.deb ...
Unpacking python3-colorama (0.3.7-1) ...
Selecting previously unselected package python3-click.
Preparing to unpack .../16-python3-click_7.0-1_all.deb ...
Unpacking python3-click (7.0-1) ...
Selecting previously unselected package python3-dateutil.
Preparing to unpack .../17-python3-dateutil_2.7.3-3_all.deb ...
Unpacking python3-dateutil (2.7.3-3) ...
Selecting previously unselected package python3-regex.
Preparing to unpack .../18-python3-regex_0.1.20190207-1_armhf.deb ...
Unpacking python3-regex (0.1.20190207-1) ...
Selecting previously unselected package python3-tz.
Preparing to unpack .../19-python3-tz_2019.1-1_all.deb ...
Unpacking python3-tz (2019.1-1) ...
Selecting previously unselected package python3-tzlocal.
Preparing to unpack .../20-python3-tzlocal_1.5.1-1_all.deb ...
Unpacking python3-tzlocal (1.5.1-1) ...
Selecting previously unselected package python3-dateparser.
Preparing to unpack .../21-python3-dateparser_0.7.1-1_all.deb ...
Unpacking python3-dateparser (0.7.1-1) ...
Selecting previously unselected package python3-itsdangerous.
Preparing to unpack .../22-python3-itsdangerous_0.24+dfsg1-2_all.deb ...
Unpacking python3-itsdangerous (0.24+dfsg1-2) ...
Selecting previously unselected package python3-markupsafe.
Preparing to unpack .../23-python3-markupsafe_1.1.0-1_armhf.deb ...
Unpacking python3-markupsafe (1.1.0-1) ...
Selecting previously unselected package python3-jinja2.
Preparing to unpack .../24-python3-jinja2_2.10-2_all.deb ...
Unpacking python3-jinja2 (2.10-2) ...
Selecting previously unselected package python3-werkzeug.
Preparing to unpack .../25-python3-werkzeug_0.14.1+dfsg1-4+deb10u1_all.deb ...
Unpacking python3-werkzeug (0.14.1+dfsg1-4+deb10u1) ...
Selecting previously unselected package python3-flask.
Preparing to unpack .../26-python3-flask_1.0.2-3_all.deb ...
Unpacking python3-flask (1.0.2-3) ...
Selecting previously unselected package python3-sqlalchemy.
Preparing to unpack .../27-python3-sqlalchemy_1.2.18+ds1-2_all.deb ...
Unpacking python3-sqlalchemy (1.2.18+ds1-2) ...
Selecting previously unselected package python3-flask-sqlalchemy.
Preparing to unpack .../28-python3-flask-sqlalchemy_2.1-3_all.deb ...
Unpacking python3-flask-sqlalchemy (2.1-3) ...
Selecting previously unselected package python3-pip.
Preparing to unpack .../29-python3-pip_18.1-5+rpt1_all.deb ...
Unpacking python3-pip (18.1-5+rpt1) ...
Setting up binutils-arm-none-eabi (2.31.1-11+rpi1+11) ...
Setting up python3-colorama (0.3.7-1) ...
Setting up libev4:armhf (1:4.25-1) ...
Setting up gcc-arm-none-eabi (15:7-2018-q2-6) ...
Setting up python3-itsdangerous (0.24+dfsg1-2) ...
Setting up dnsmasq-base (2.80-1+rpt1) ...
Setting up python3-click (7.0-1) ...
Setting up python3-markupsafe (1.1.0-1) ...
Setting up python3-tz (2019.1-1) ...
Setting up python3-sqlalchemy (1.2.18+ds1-2) ...
Setting up dnsmasq (2.80-1+rpt1) ...
Created symlink /etc/systemd/system/multi-user.target.wants/dnsmasq.service → /lib/systemd/system/dnsmasq.service.
Setting up python3-jinja2 (2.10-2) ...
Setting up hostapd (2:2.7+git20190128+0c1e29f-6+deb10u1) ...
Created symlink /etc/systemd/system/multi-user.target.wants/hostapd.service → /lib/systemd/system/hostapd.service.
Job for hostapd.service failed because the control process exited with error code.
See "systemctl status hostapd.service" and "journalctl -xe" for details.
Created symlink /etc/systemd/system/hostapd.service → /dev/null.
Setting up python3-werkzeug (0.14.1+dfsg1-4+deb10u1) ...
Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ...
Setting up libnewlib-dev (3.1.0.20181231-1) ...
Setting up python3-regex (0.1.20190207-1) ...
Setting up python3-dateutil (2.7.3-3) ...
Setting up python-pip-whl (18.1-5+rpt1) ...
Setting up libev-dev (1:4.25-1) ...
Setting up python3-tzlocal (1.5.1-1) ...
Setting up python3-lib2to3 (3.7.3-1) ...
Setting up python3-distutils (3.7.3-1) ...
Setting up python3-dateparser (0.7.1-1) ...
Setting up libncurses-dev:armhf (6.1+20181013-2+deb10u2) ...
Setting up python3-setuptools (40.8.0-1) ...
Setting up python3-flask (1.0.2-3) ...
Setting up libreadline-dev:armhf (7.0-5) ...
Setting up python3-gunicorn (19.9.0-1) ...
Setting up python3-pip (18.1-5+rpt1) ...
Setting up python3-flask-sqlalchemy (2.1-3) ...
Setting up gunicorn3 (19.9.0-1) ...
Processing triggers for install-info (6.5.0.dfsg.1-4+b1) ...
Processing triggers for libc-bin (2.28-10+rpi1) ...
Processing triggers for systemd (241-7~deb10u1+rpi1) ...
Processing triggers for man-db (2.8.5-2) ...
Processing triggers for dbus (1.12.16-1) ...
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting pip
  Downloading https://files.pythonhosted.org/packages/00/b6/9cfa56b4081ad13874b0c6f96af8ce16cfbc1cb06bedf8e9164ce5551ec1/pip-19.3.1-py2.py3-none-any.whl (1.4MB)
    100% |████████████████████████████████| 1.4MB 64kB/s
Installing collected packages: pip
  Found existing installation: pip 18.1
    Not uninstalling pip at /usr/lib/python3/dist-packages, outside environment /usr
    Can't uninstall 'pip'. No files were found to uninstall.
Successfully installed pip-19.3.1
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting datetime
  Downloading https://files.pythonhosted.org/packages/73/22/a5297f3a1f92468cc737f8ce7ba6e5f245fcfafeae810ba37bd1039ea01c/DateTime-4.3-py2.py3-none-any.whl (60kB)
     |████████████████████████████████| 61kB 312kB/s
Requirement already satisfied: pytz in /usr/lib/python3/dist-packages (from datetime) (2019.1)
Collecting zope.interface
  Downloading https://www.piwheels.org/simple/zope-interface/zope.interface-4.7.1-cp37-cp37m-linux_armv7l.whl (159kB)
     |████████████████████████████████| 163kB 51kB/s
Requirement already satisfied: setuptools in /usr/lib/python3/dist-packages (from zope.interface->datetime) (40.8.0)
Installing collected packages: zope.interface, datetime
Successfully installed datetime-4.3 zope.interface-4.7.1
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting Flask-Babel
  Downloading https://www.piwheels.org/simple/flask-babel/Flask_Babel-0.12.2-py3-none-any.whl
Requirement already satisfied: Flask in /usr/lib/python3/dist-packages (from Flask-Babel) (1.0.2)
Collecting Babel>=2.3
  Downloading https://files.pythonhosted.org/packages/2c/60/f2af68eb046c5de5b1fe6dd4743bf42c074f7141fe7b2737d3061533b093/Babel-2.7.0-py2.py3-none-any.whl (8.4MB)
     |████████████████████████████████| 8.4MB 67kB/s
Requirement already satisfied: Jinja2>=2.5 in /usr/lib/python3/dist-packages (from Flask-Babel) (2.10)
Requirement already satisfied: pytz>=2015.7 in /usr/lib/python3/dist-packages (from Babel>=2.3->Flask-Babel) (2019.1)
Installing collected packages: Babel, Flask-Babel
Successfully installed Babel-2.7.0 Flask-Babel-0.12.2
Cloning into 'proxmark3'...
remote: Enumerating objects: 22, done.
remote: Counting objects: 100% (22/22), done.
remote: Compressing objects: 100% (14/14), done.
remote: Total 46263 (delta 12), reused 16 (delta 8), pack-reused 46241
Receiving objects: 100% (46263/46263), 32.99 MiB | 69.00 KiB/s, done.
Resolving deltas: 100% (36033/36033), done.
Already up to date.

===================================================================
Platform name:     Proxmark3 rdv4
PLATFORM:          PM3RDV4
Platform extras:   No extra selected
Included options:  SMARTCARD FLASH LF HITAG ISO15693 LEGICRF ISO14443b ISO14443a ICLASS FELICA NFCBARCODE HFSNIFF
Standalone mode:   LF_SAMYRUN
===================================================================
[*] MAKE client/clean
[!] Platform definitions changed, cleaning bootrom/armsrc/recovery first...
[*] MAKE bootrom/clean
[*] MAKE fpga_compress/clean
[*] MAKE armsrc/clean
[*] MAKE recovery/clean
[*] MAKE mfkey/clean
[*] MAKE nonce2key/clean

===================================================================
Platform name:     Proxmark3 rdv4
PLATFORM:          PM3RDV4
Platform extras:   No extra selected
Included options:  SMARTCARD FLASH LF HITAG ISO15693 LEGICRF ISO14443b ISO14443a ICLASS FELICA NFCBARCODE HFSNIFF
Standalone mode:   LF_SAMYRUN
===================================================================
[*] MAKE client/all
[-] CC proxmark3.c
[-] CC uart/uart_posix.c
[-] CC uart/uart_win32.c
[-] CC ui.c
[-] CC ../common/commonutil.c
[-] CC util.c
[-] CC ../common/util_posix.c
[-] CC scandir.c
[-] CC ../common/crc16.c
[-] CC comms.c
[-] CC ../common/crapto1/crapto1.c
[-] CC ../common/crapto1/crypto1.c
[-] CC mifare/mifaredefault.c
[-] CC mifare/mfkey.c
[-] CC tea.c
[-] CC fido/additional_ca.c
[-] CC fido/cose.c
[-] CC fido/cbortools.c
[-] CC fido/fidocore.c
[-] CC crypto/asn1dump.c
[-] CC crypto/libpcrypto.c
[-] CC crypto/asn1utils.c
[-] CC cliparser/argtable3.c
[-] CC cliparser/cliparser.c
[-] CC loclass/cipher.c
[-] CC loclass/cipherutils.c
[-] CC loclass/ikeys.c
[-] CC loclass/elite_crack.c
[-] CC fileutils.c
[-] CC whereami.c
[-] CC mifare/mifarehost.c
[-] CC ../common/parity.c
[-] CC ../common/crc.c
[-] CC ../common/crc64.c
[-] CC ../common/legic_prng.c
[-] CC ../common/iso15693tools.c
[-] CC prng.c
[-] CC graph.c
[-] CC cmddata.c
[-] CC ../common/lfdemod.c
[-] CC emv/crypto_polarssl.c
[-] CC emv/crypto.c
[-] CC emv/emv_pk.c
[-] CC emv/emv_pki.c
[-] CC emv/emv_pki_priv.c
[-] CC emv/test/cryptotest.c
[-] CC emv/apduinfo.c
[-] CC emv/dump.c
[-] CC emv/tlv.c
[-] CC emv/emv_tags.c
[-] CC emv/dol.c
[-] CC emv/emvjson.c
[-] CC emv/emvcore.c
[-] CC emv/test/crypto_test.c
[-] CC emv/test/sda_test.c
[-] CC emv/test/dda_test.c
[-] CC emv/test/cda_test.c
[-] CC emv/cmdemv.c
[-] CC emv/emv_roca.c
[-] CC mifare/mifare4.c
[-] CC mifare/mad.c
[-] CC mifare/ndef.c
[-] CC cmdanalyse.c
[-] CC cmdhf.c
[-] CC cmdhflist.c
[-] CC aidsearch.c
[-] CC cmdhf14a.c
[-] CC cmdhf14b.c
[-] CC cmdhf15.c
[-] CC cmdhfepa.c
[-] CC cmdhflegic.c
[-] CC cmdhficlass.c
[-] CC cmdhfmf.c
[-] CC cmdhfmfu.c
[-] CC cmdhfmfp.c
[-] CC cmdhfmfhard.c
[-] CC hardnested/hardnested_bruteforce.c
[-] CC cmdhfmfdes.c
[-] CC cmdhftopaz.c
[-] CC cmdhffido.c
[-] CC cmdhffelica.c
[-] CC cmdhfthinfilm.c
[-] CC cmdhw.c
[-] CC cmdlf.c
[-] CC cmdlfawid.c
[-] CC cmdlfcotag.c
[-] CC cmdlfem4x.c
[-] CC cmdlffdx.c
[-] CC cmdlfguard.c
[-] CC cmdlfgallagher.c
[-] CC cmdlfhid.c
[-] CC cmdlfhitag.c
[-] CC cmdlfio.c
[-] CC cmdlfindala.c
[-] CC cmdlfjablotron.c
[-] CC cmdlfkeri.c
[-] CC cmdlfnexwatch.c
[-] CC cmdlfnedap.c
[-] CC cmdlfnoralsy.c
[-] CC cmdlfpac.c
[-] CC cmdlfparadox.c
[-] CC cmdlfpcf7931.c
[-] CC cmdlfpresco.c
[-] CC cmdlfpyramid.c
[-] CC cmdlfsecurakey.c
[-] CC cmdlft55xx.c
[-] CC cmdlfti.c
[-] CC cmdlfviking.c
[-] CC cmdlfvisa2000.c
[-] CC cmdlfmotorola.c
[-] CC cmdtrace.c
[-] CC cmdflashmem.c
[-] CC cmdflashmemspiffs.c
[-] CC cmdsmartcard.c
[-] CC cmdusart.c
[-] CC cmdwiegand.c
[-] CC cmdparser.c
[-] CC cmdmain.c
[-] CC pm3_binlib.c
[-] CC scripting.c
[-] CC cmdscript.c
[-] CC pm3_bitlib.c
[-] CC cmdcrc.c
[-] CC ../common/bucketsort.c
[-] CC flash.c
[-] CC wiegand_formats.c
[-] CC wiegand_formatutils.c
[-] CC hardnested/hardnested_bf_core.c
[-] CC hardnested/hardnested_bitarray_core.c
[-] CXX guidummy.cpp
[*] MAKE liblua for linux
[-] CC lapi.c
[-] CC lcode.c
[-] CC lctype.c
[-] CC ldebug.c
[-] CC ldo.c
[-] CC ldump.c
[-] CC lfunc.c
[-] CC lgc.c
[-] CC llex.c
[-] CC lmem.c
[-] CC lobject.c
[-] CC lopcodes.c
[-] CC lparser.c
[-] CC lstate.c
[-] CC lstring.c
[-] CC ltable.c
[-] CC ltm.c
[-] CC lundump.c
[-] CC lvm.c
[-] CC lzio.c
[-] CC lauxlib.c
[-] CC lbaselib.c
[-] CC lbitlib.c
[-] CC lcorolib.c
[-] CC ldblib.c
[-] CC liolib.c
[-] CC lmathlib.c
[-] CC loslib.c
[-] CC lstrlib.c
[-] CC ltablib.c
[-] CC loadlib.c
[-] CC linit.c
[=] AR liblua.a
[*] MAKE jansson
[-] CC dump.c
[-] CC error.c
[-] CC hashtable.c
[-] CC hashtable_seed.c
[-] CC load.c
[-] CC memory.c
[-] CC pack_unpack.c
[-] CC strbuffer.c
[-] CC strconv.c
[-] CC utf.c
[-] CC path.c
[-] CC value.c
[=] AR libjansson.a
[*] MAKE tinycbor
[-] CC cborencoder.c
[-] CC cborencoder_close_container_checked.c
[-] CC cborerrorstrings.c
[-] CC cborparser.c
[-] CC cborparser_dup_string.c
[-] CC cborpretty.c
[-] CC cbortojson.c
[-] CC cborvalidation.c
[=] AR tinycbor.a
[*] MAKE reveng
[-] CC bmpbit.c
[-] CC cli.c
[-] CC getopt.c
[-] CC model.c
[-] CC poly.c
[-] CC preset.c
[-] CC reveng.c
[-] CC bmpbit.c
[=] TEST bmptst
[=] AR libreveng.a
[*] MAKE mbedtls
[-] CC aes.c
[-] CC asn1parse.c
[-] CC asn1write.c
[-] CC base64.c
[-] CC bignum.c
[-] CC ctr_drbg.c
[-] CC entropy_poll.c
[-] CC entropy.c
[-] CC error.c
[-] CC timing.c
[-] CC ecp.c
[-] CC ecp_curves.c
[-] CC certs.c
[-] CC camellia.c
[-] CC blowfish.c
[-] CC cipher_wrap.c
[-] CC cipher.c
[-] CC cmac.c
[-] CC des.c
[-] CC ecdsa.c
[-] CC md.c
[-] CC md_wrap.c
[-] CC md5.c
[-] CC oid.c
[-] CC pem.c
[-] CC arc4.c
[-] CC pk.c
[-] CC pk_wrap.c
[-] CC pkwrite.c
[-] CC pkcs5.c
[-] CC pkcs12.c
[-] CC pkparse.c
[-] CC platform.c
[-] CC platform_util.c
[-] CC rsa.c
[-] CC rsa_internal.c
[-] CC sha1.c
[-] CC sha256.c
[-] CC sha512.c
[-] CC threading.c
[-] CC x509.c
[-] CC x509_crl.c
[-] CC x509_crt.c
[=] AR libmbedtls.a
[*] MAKE zlib
[-] CC deflate.c
[-] CC adler32.c
[-] CC trees.c
[-] CC zutil.c
[-] CC inflate.c
[-] CC inffast.c
[-] CC inftrees.c
[=] AR libz.a
[*] MAKE amiibo
[-] CC amiibo.c
[-] CC drbg.c
[-] CC keygen.c
[=] AR libamiibo.a
[=] GEN lualibs/pm3_cmd.lua
[=] GEN lualibs/mfc_default_keys.lua
[=] LD proxmark3
[*] MAKE bootrom/all
[=] GEN version.c
[-] CC version.c
[-] CC ram-reset.s
[-] CC flash-reset.s
[-] CC ../common_arm/usb_cdc.c
[-] CC ../common_arm/clocks.c
[-] CC bootrom.c
[=] LD obj/bootrom.elf
[=] GEN obj/bootrom.s19
[*] MAKE fpga_compress/all
[*] MAKE zlib
[-] CC deflate.c
[-] CC adler32.c
[-] CC trees.c
[-] CC zutil.c
[-] CC inflate.c
[-] CC inffast.c
[-] CC inftrees.c
[=] AR libz.a
[-] CC fpga_compress.c
[=] LD fpga_compress
[*] MAKE armsrc/all
[-] GEN fpga_version_info.c
[-] CC fpga_version_info.c
[-] GEN obj/fpga_all.bit.z
[-] GEN obj/fpga_all.o
[-] CC start.c
[-] CC iso15693.c
[-] CC ../common/iso15693tools.c
[-] CC thinfilm.c
[-] CC lfops.c
[-] CC lfsampling.c
[-] CC pcf7931.c
[-] CC ../common/lfdemod.c
[-] CC ../common/zlib/inflate.c
[-] CC ../common/zlib/inffast.c
[-] CC ../common/zlib/inftrees.c
[-] CC ../common/zlib/adler32.c
[-] CC ../common/zlib/zutil.c
[-] CC legicrf.c
[-] CC legicrfsim.c
[-] CC ../common/legic_prng.c
[-] CC flashmem.c
[-] CC i2c.c
[-] CC hitag2_crypto.c
[-] CC hitag2.c
[-] CC hitagS.c
[-] CC spiffs.c
[-] CC spiffs_cache.c
[-] CC spiffs_check.c
[-] CC spiffs_gc.c
[-] CC spiffs_nucleus.c
[-] CC spiffs_hydrogen.c
[-] CC appmain.c
[-] CC printf.c
[-] CC dbprint.c
[-] CC ../common/commonutil.c
[-] CC util.c
[-] CC string.c
[-] CC BigBuf.c
[-] CC ticks.c
[-] CC ../common_arm/clocks.c
[-] CC hfsnoop.c
[-] CC fpgaloader.c
[-] CC iso14443a.c
[-] CC mifareutil.c
[-] CC mifarecmd.c
[-] CC epa.c
[-] CC mifaresim.c
[-] CC iso14443b.c
[-] CC ../common/crapto1/crypto1.c
[-] CC des.c
[-] CC desfire_key.c
[-] CC mifaredesfire.c
[-] CC ../common/mbedtls/aes.c
[-] CC ../common/mbedtls/platform_util.c
[-] CC iclass.c
[-] CC optimized_cipher.c
[-] CC ../common/crc.c
[-] CC ../common/crc16.c
[-] CC ../common/crc32.c
[-] CC felica.c
[-] CC ../armsrc/Standalone/lf_samyrun.c
[-] CC ../common/parity.c
[-] CC ../common_arm/usb_cdc.c
[-] CC cmd.c
[-] GEN version.c
[-] CC version.c
[=] LD obj/fullimage.stage1.elf
[-] GEN obj/fullimage.nodata.bin
[-] GEN obj/fullimage.nodata.o
[-] GEN obj/fullimage.data.bin
[-] GEN obj/fullimage.data.bin.z
[-] GEN obj/fullimage.data.o
[=] LD obj/fullimage.elf
[=] GEN obj/fullimage.s19
[*] MAKE recovery/all
[=] GEN bootrom.bin
[=] GEN fullimage.bin
[=] GEN proxmark3_recovery.bin
[*] MAKE mfkey/all
[-] CC mfkey32.c
[-] CC ../../common/crapto1/crypto1.c
[-] CC ../../common/crapto1/crapto1.c
[-] CC ../../common/bucketsort.c
[=] LD mfkey32
[-] CC mfkey32v2.c
[=] LD mfkey32v2
[-] CC mfkey64.c
[=] LD mfkey64
[*] MAKE nonce2key/all
[-] CC nonce2key.c
[-] CC ../../common/crapto1/crypto1.c
[-] CC ../../common/crapto1/crapto1.c
[-] CC ../../common/bucketsort.c
[=] LD nonce2key

===================================================================
Platform name:     Proxmark3 rdv4
PLATFORM:          PM3RDV4
Platform extras:   No extra selected
Included options:  SMARTCARD FLASH LF HITAG ISO15693 LEGICRF ISO14443b ISO14443a ICLASS FELICA NFCBARCODE HFSNIFF
Standalone mode:   LF_SAMYRUN
===================================================================
[*] MAKE client/install
[@] Installing client to /usr/local...
[*] MAKE bootrom/install
[@] Installing bootrom to /usr/local...
[*] MAKE fpga_compress/install
[*] MAKE armsrc/install
[@] Installing fullimage to /usr/local...
[*] MAKE bootrom/all
make[1]: Nothing to be done for 'all'.
[*] MAKE fpga_compress/all
make[1]: Nothing to be done for 'all'.
[*] MAKE armsrc/all
make[1]: Nothing to be done for 'all'.
[*] MAKE recovery/install
[@] Installing recovery to /usr/local...
[*] MAKE mfkey/install
[@] Installing mfkey32 mfkey32v2 mfkey64 to /usr/local...
[*] MAKE nonce2key/install
[@] Installing nonce2key to /usr/local...
[*] MAKE client/all
make[1]: Nothing to be done for 'all'.
[*] MAKE recovery/all
make[1]: Nothing to be done for 'all'.
[*] MAKE mfkey/all
make[1]: Nothing to be done for 'all'.
[*] MAKE nonce2key/all
make[1]: Nothing to be done for 'all'.
[@] Installing common resources to /usr/local...
./rpi-setup.sh: line 5: /tmp/dhcpcd.conf: Permission denied
dnsmasq.service is not active, cannot reload.
What do you want your Wifi Password to be?:[wifi-password]
./rpi-setup.sh: line 29: wireless_password: command not found
Removed /etc/systemd/system/hostapd.service.
Synchronizing state of hostapd.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable hostapd
Job for hostapd.service failed because the control process exited with error code.
See "systemctl status hostapd.service" and "journalctl -xe" for details.
Created symlink /etc/systemd/system/multi-user.target.wants/proxmark3-web.service → /etc/systemd/system/proxmark3-web.service.
pi@raspberrypi:~/proxmark3-web $ sudo systemctl status hostapd.service
● hostapd.service - Advanced IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator
   Loaded: loaded (/lib/systemd/system/hostapd.service; enabled; vendor preset: enabled)
   Active: activating (auto-restart) (Result: exit-code) since Wed 2019-12-18 02:14:14 GMT; 355ms ago
  Process: 6531 ExecStart=/usr/sbin/hostapd -B -P /run/hostapd.pid -B $DAEMON_OPTS ${DAEMON_CONF} (code=exited, status=1/FAILURE)
pi@raspberrypi:~/proxmark3-web $ journalctl -xe
--
-- The job identifier is 8891 and the job result is failed.
Dec 18 02:14:27 raspberrypi systemd[1]: hostapd.service: Service RestartSec=2s expired, scheduling restart.
Dec 18 02:14:27 raspberrypi systemd[1]: hostapd.service: Scheduled restart job, restart counter is at 139.
-- Subject: Automatic restarting of a unit has been scheduled
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- Automatic restarting of the unit hostapd.service has been scheduled, as the result for
-- the configured Restart= setting for the unit.
Dec 18 02:14:27 raspberrypi systemd[1]: Stopped Advanced IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator.
-- Subject: A stop job for unit hostapd.service has finished
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- A stop job for unit hostapd.service has finished.
--
-- The job identifier is 8948 and the job result is done.
Dec 18 02:14:27 raspberrypi systemd[1]: Starting Advanced IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator...
-- Subject: A start job for unit hostapd.service has begun execution
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- A start job for unit hostapd.service has begun execution.
--
-- The job identifier is 8948.
Dec 18 02:14:27 raspberrypi hostapd[6550]: Configuration file: /etc/hostapd/hostapd.conf
Dec 18 02:14:27 raspberrypi hostapd[6550]: Line 14: invalid WPA passphrase length 0 (expected 8..63)
Dec 18 02:14:27 raspberrypi hostapd[6550]: WPA-PSK enabled, but PSK or passphrase is not configured.
Dec 18 02:14:27 raspberrypi hostapd[6550]: 2 errors found in configuration file '/etc/hostapd/hostapd.conf'
Dec 18 02:14:27 raspberrypi hostapd[6550]: Failed to set up interface with /etc/hostapd/hostapd.conf
Dec 18 02:14:27 raspberrypi hostapd[6550]: Failed to initialize interface
Dec 18 02:14:27 raspberrypi systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
-- Subject: Unit process exited
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- An ExecStart= process belonging to unit hostapd.service has exited.
--
-- The process' exit code is 'exited' and its exit status is 1.
Dec 18 02:14:27 raspberrypi systemd[1]: hostapd.service: Failed with result 'exit-code'.
-- Subject: Unit failed
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- The unit hostapd.service has entered the 'failed' state with result 'exit-code'.
Dec 18 02:14:27 raspberrypi systemd[1]: Failed to start Advanced IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator.
-- Subject: A start job for unit hostapd.service has failed
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- A start job for unit hostapd.service has finished with a failure.
--
-- The job identifier is 8948 and the job result is failed.
pi@raspberrypi:~/proxmark3-web $ sudo ./rpi-setup.sh
dnsmasq.service is not active, cannot reload.
What do you want your Wifi Password to be?:[wifi-password]
./rpi-setup.sh: line 29: wireless_password: command not found
Synchronizing state of hostapd.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable hostapd
Job for hostapd.service failed because the control process exited with error code.
See "systemctl status hostapd.service" and "journalctl -xe" for details.

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.