Code Monkey home page Code Monkey logo

proxmark3-web's People

Contributors

lanrat avatar videoman avatar

Stargazers

 avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar

Watchers

 avatar  avatar  avatar  avatar

proxmark3-web's Issues

MAKE client/install failed

I am attempting to install and run a proxmark 3 RDV2 from a Raspberry Pi 3 Model B with full Buster install.
When I run the command: sudo make clean && make all I get the following error during the [*] MAKE client/all:

src/cmdhfmfhard.c: 26: 19: fatal error: bzlib.h: no such file or directory
#include <bzlib.h>
^
compilation terminated
Makefile: 686: recipe for target 'obj/cmdhfmfhard.o' failed
make[1]: *** [obj/cmdhfmfhard.o] Error 1
Makefile: 136: recipe for target 'client/all' failed
make: *** [client/all] Error 2

Could someone help resolve this issue? Thanks in advance.

issues with rpi-setup.sh

Getting a few issues with ./install-all.sh. After running it I get the below error output

[@] Installing common resources to /usr/local...
./rpi-setup.sh: line 5: /tmp/dhcpcd.conf: Permission denied
dnsmasq.service is not active, cannot reload.
What do you want your Wifi Password to be?:[wifi-password]
./rpi-setup.sh: line 29: wireless_password: command not found
Removed /etc/systemd/system/hostapd.service.
Synchronizing state of hostapd.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable hostapd
Job for hostapd.service failed because the control process exited with error code.
See "systemctl status hostapd.service" and "journalctl -xe" for details.
Created symlink /etc/systemd/system/multi-user.target.wants/proxmark3-web.service → /etc/systemd/system/proxmark3-web.service.

Tried to fix with sudo'ing the rpi-setup script, and still got errors:

pi@raspberrypi:~/proxmark3-web $ sudo ./rpi-setup.sh
dnsmasq.service is not active, cannot reload.
What do you want your Wifi Password to be?:[wifi-password]
./rpi-setup.sh: line 29: wireless_password: command not found
Synchronizing state of hostapd.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable hostapd
Job for hostapd.service failed because the control process exited with error code.
See "systemctl status hostapd.service" and "journalctl -xe" for details.

I am on the latest version of Raspbian Buster September 2019 (lite), fresh install, updated.

Full output of install:

pi@raspberrypi:~/proxmark3-web $ ./install-all.sh
Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
build-essential is already the newest version (12.6).
ca-certificates is already the newest version (20190110).
git is already the newest version (1:2.20.1-2+deb10u1).
pkg-config is already the newest version (0.29-6).
The following additional packages will be installed:
  binutils-arm-none-eabi dnsmasq-base libev4 libncurses-dev libncurses6 libncursesw6 libtinfo6 python-pip-whl python3-click python3-colorama
  python3-distutils python3-gunicorn python3-itsdangerous python3-jinja2 python3-lib2to3 python3-markupsafe python3-regex python3-setuptools
  python3-sqlalchemy python3-tz python3-tzlocal python3-werkzeug
Suggested packages:
  gunicorn-examples python3-pastedeploy python3-setproctitle python3-tornado ncurses-doc libnewlib-arm-none-eabi readline-doc python-flask-doc
  python-jinja2-doc python-setuptools-doc python-sqlalchemy-doc python3-psycopg2 python3-mysqldb python3-fdb ipython3 python3-lxml python3-termcolor
  python3-watchdog python-werkzeug-doc
Recommended packages:
  dns-root-data libnewlib-arm-none-eabi python3-blinker python3-simplejson python3-dev python3-wheel python3-sqlalchemy-ext python3-openssl
  python3-pyinotify
The following NEW packages will be installed:
  binutils-arm-none-eabi dnsmasq dnsmasq-base gcc-arm-none-eabi gunicorn3 hostapd libev-dev libev4 libncurses-dev libnewlib-dev libreadline-dev
  python-pip-whl python3-click python3-colorama python3-dateparser python3-dateutil python3-distutils python3-flask python3-flask-sqlalchemy
  python3-gunicorn python3-itsdangerous python3-jinja2 python3-lib2to3 python3-markupsafe python3-pip python3-regex python3-setuptools python3-sqlalchemy
  python3-tz python3-tzlocal python3-werkzeug
The following packages will be upgraded:
  libncurses6 libncursesw6 libtinfo6
3 upgraded, 31 newly installed, 0 to remove and 59 not upgraded.
Need to get 33.8 MB of archives.
After this operation, 534 MB of additional disk space will be used.
Get:1 http://archive.raspberrypi.org/debian buster/main armhf dnsmasq-base armhf 2.80-1+rpt1 [400 kB]
Get:2 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf hostapd armhf 2:2.7+git20190128+0c1e29f-6+deb10u1 [630 kB]
Get:6 http://mirrors.syringanetworks.net/raspbian/raspbian buster/main armhf binutils-arm-none-eabi armhf 2.31.1-11+rpi1+11 [2,006 kB]
Get:11 http://raspbian-us.ngc292.space/raspbian buster/main armhf python3-gunicorn all 19.9.0-1 [88.4 kB]
Get:20 http://raspbian.mirror.constant.com/raspbian buster/main armhf python3-dateutil all 2.7.3-3 [64.5 kB]
Get:23 http://raspbian-us.ngc292.space/raspbian buster/main armhf python3-tzlocal all 1.5.1-1 [16.4 kB]
Get:22 http://raspbian.mirror.constant.com/raspbian buster/main armhf python3-tz all 2019.1-1 [27.1 kB]
Get:25 http://mirror.us.leaseweb.net/raspbian/raspbian buster/main armhf python3-itsdangerous all 0.24+dfsg1-2 [13.0 kB]
Get:29 http://raspbian.mirror.constant.com/raspbian buster/main armhf python3-flask all 1.0.2-3 [93.0 kB]
Get:3 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [78.9 kB]
Get:4 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf libtinfo6 armhf 6.1+20181013-2+deb10u2 [312 kB]
Get:5 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf libncursesw6 armhf 6.1+20181013-2+deb10u2 [103 kB]
Get:32 http://archive.raspberrypi.org/debian buster/main armhf dnsmasq all 2.80-1+rpt1 [16.5 kB]
Get:33 http://archive.raspberrypi.org/debian buster/main armhf python-pip-whl all 18.1-5+rpt1 [1,591 kB]
Get:7 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf gcc-arm-none-eabi armhf 15:7-2018-q2-6 [25.3 MB]
Get:21 http://mirrors.syringanetworks.net/raspbian/raspbian buster/main armhf python3-regex armhf 0.1.20190207-1 [231 kB]
Get:28 http://mirrors.syringanetworks.net/raspbian/raspbian buster/main armhf python3-werkzeug all 0.14.1+dfsg1-4+deb10u1 [196 kB]
Get:34 http://archive.raspberrypi.org/debian buster/main armhf python3-pip all 18.1-5+rpt1 [171 kB]
Get:8 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-lib2to3 all 3.7.3-1 [76.7 kB]
Get:9 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-distutils all 3.7.3-1 [142 kB]
Get:10 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-setuptools all 40.8.0-1 [306 kB]
Get:12 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf gunicorn3 all 19.9.0-1 [17.6 kB]
Get:13 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf libev4 armhf 1:4.25-1 [34.5 kB]
Get:14 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf libev-dev armhf 1:4.25-1 [125 kB]
Get:15 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf libncurses-dev armhf 6.1+20181013-2+deb10u2 [278 kB]
Get:16 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf libnewlib-dev all 3.1.0.20181231-1 [259 kB]
Get:17 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf libreadline-dev armhf 7.0-5 [110 kB]
Get:18 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-colorama all 0.3.7-1 [18.1 kB]
Get:19 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-click all 7.0-1 [73.6 kB]
Get:24 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-dateparser all 0.7.1-1 [168 kB]
Get:26 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-markupsafe armhf 1.1.0-1 [14.4 kB]
Get:27 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-jinja2 all 2.10-2 [106 kB]
Get:30 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-sqlalchemy all 1.2.18+ds1-2 [727 kB]
Get:31 http://mirror.pit.teraswitch.com/raspbian/raspbian buster/main armhf python3-flask-sqlalchemy all 2.1-3 [13.7 kB]
Fetched 33.8 MB in 7min 59s (70.6 kB/s)
apt-listchanges: Reading changelogs...
Extracting templates from packages: 100%
Selecting previously unselected package hostapd.
(Reading database ... 40741 files and directories currently installed.)
Preparing to unpack .../hostapd_2%3a2.7+git20190128+0c1e29f-6+deb10u1_armhf.deb ...
Unpacking hostapd (2:2.7+git20190128+0c1e29f-6+deb10u1) ...
Preparing to unpack .../libncurses6_6.1+20181013-2+deb10u2_armhf.deb ...
Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) over (6.1+20181013-2+deb10u1) ...
Preparing to unpack .../libtinfo6_6.1+20181013-2+deb10u2_armhf.deb ...
Unpacking libtinfo6:armhf (6.1+20181013-2+deb10u2) over (6.1+20181013-2+deb10u1) ...
Setting up libtinfo6:armhf (6.1+20181013-2+deb10u2) ...
(Reading database ... 40767 files and directories currently installed.)
Preparing to unpack .../libncursesw6_6.1+20181013-2+deb10u2_armhf.deb ...
Unpacking libncursesw6:armhf (6.1+20181013-2+deb10u2) over (6.1+20181013-2+deb10u1) ...
Setting up libncursesw6:armhf (6.1+20181013-2+deb10u2) ...
Selecting previously unselected package binutils-arm-none-eabi.
(Reading database ... 40767 files and directories currently installed.)
Preparing to unpack .../00-binutils-arm-none-eabi_2.31.1-11+rpi1+11_armhf.deb ...
Unpacking binutils-arm-none-eabi (2.31.1-11+rpi1+11) ...
Selecting previously unselected package dnsmasq-base.
Preparing to unpack .../01-dnsmasq-base_2.80-1+rpt1_armhf.deb ...
Unpacking dnsmasq-base (2.80-1+rpt1) ...
Selecting previously unselected package dnsmasq.
Preparing to unpack .../02-dnsmasq_2.80-1+rpt1_all.deb ...
Unpacking dnsmasq (2.80-1+rpt1) ...
Selecting previously unselected package gcc-arm-none-eabi.
Preparing to unpack .../03-gcc-arm-none-eabi_15%3a7-2018-q2-6_armhf.deb ...
Unpacking gcc-arm-none-eabi (15:7-2018-q2-6) ...
Selecting previously unselected package python3-lib2to3.
Preparing to unpack .../04-python3-lib2to3_3.7.3-1_all.deb ...
Unpacking python3-lib2to3 (3.7.3-1) ...
Selecting previously unselected package python3-distutils.
Preparing to unpack .../05-python3-distutils_3.7.3-1_all.deb ...
Unpacking python3-distutils (3.7.3-1) ...
Selecting previously unselected package python3-setuptools.
Preparing to unpack .../06-python3-setuptools_40.8.0-1_all.deb ...
Unpacking python3-setuptools (40.8.0-1) ...
Selecting previously unselected package python3-gunicorn.
Preparing to unpack .../07-python3-gunicorn_19.9.0-1_all.deb ...
Unpacking python3-gunicorn (19.9.0-1) ...
Selecting previously unselected package gunicorn3.
Preparing to unpack .../08-gunicorn3_19.9.0-1_all.deb ...
Unpacking gunicorn3 (19.9.0-1) ...
Selecting previously unselected package libev4:armhf.
Preparing to unpack .../09-libev4_1%3a4.25-1_armhf.deb ...
Unpacking libev4:armhf (1:4.25-1) ...
Selecting previously unselected package libev-dev.
Preparing to unpack .../10-libev-dev_1%3a4.25-1_armhf.deb ...
Unpacking libev-dev (1:4.25-1) ...
Selecting previously unselected package libncurses-dev:armhf.
Preparing to unpack .../11-libncurses-dev_6.1+20181013-2+deb10u2_armhf.deb ...
Unpacking libncurses-dev:armhf (6.1+20181013-2+deb10u2) ...
Selecting previously unselected package libnewlib-dev.
Preparing to unpack .../12-libnewlib-dev_3.1.0.20181231-1_all.deb ...
Unpacking libnewlib-dev (3.1.0.20181231-1) ...
Selecting previously unselected package libreadline-dev:armhf.
Preparing to unpack .../13-libreadline-dev_7.0-5_armhf.deb ...
Unpacking libreadline-dev:armhf (7.0-5) ...
Selecting previously unselected package python-pip-whl.
Preparing to unpack .../14-python-pip-whl_18.1-5+rpt1_all.deb ...
Unpacking python-pip-whl (18.1-5+rpt1) ...
Selecting previously unselected package python3-colorama.
Preparing to unpack .../15-python3-colorama_0.3.7-1_all.deb ...
Unpacking python3-colorama (0.3.7-1) ...
Selecting previously unselected package python3-click.
Preparing to unpack .../16-python3-click_7.0-1_all.deb ...
Unpacking python3-click (7.0-1) ...
Selecting previously unselected package python3-dateutil.
Preparing to unpack .../17-python3-dateutil_2.7.3-3_all.deb ...
Unpacking python3-dateutil (2.7.3-3) ...
Selecting previously unselected package python3-regex.
Preparing to unpack .../18-python3-regex_0.1.20190207-1_armhf.deb ...
Unpacking python3-regex (0.1.20190207-1) ...
Selecting previously unselected package python3-tz.
Preparing to unpack .../19-python3-tz_2019.1-1_all.deb ...
Unpacking python3-tz (2019.1-1) ...
Selecting previously unselected package python3-tzlocal.
Preparing to unpack .../20-python3-tzlocal_1.5.1-1_all.deb ...
Unpacking python3-tzlocal (1.5.1-1) ...
Selecting previously unselected package python3-dateparser.
Preparing to unpack .../21-python3-dateparser_0.7.1-1_all.deb ...
Unpacking python3-dateparser (0.7.1-1) ...
Selecting previously unselected package python3-itsdangerous.
Preparing to unpack .../22-python3-itsdangerous_0.24+dfsg1-2_all.deb ...
Unpacking python3-itsdangerous (0.24+dfsg1-2) ...
Selecting previously unselected package python3-markupsafe.
Preparing to unpack .../23-python3-markupsafe_1.1.0-1_armhf.deb ...
Unpacking python3-markupsafe (1.1.0-1) ...
Selecting previously unselected package python3-jinja2.
Preparing to unpack .../24-python3-jinja2_2.10-2_all.deb ...
Unpacking python3-jinja2 (2.10-2) ...
Selecting previously unselected package python3-werkzeug.
Preparing to unpack .../25-python3-werkzeug_0.14.1+dfsg1-4+deb10u1_all.deb ...
Unpacking python3-werkzeug (0.14.1+dfsg1-4+deb10u1) ...
Selecting previously unselected package python3-flask.
Preparing to unpack .../26-python3-flask_1.0.2-3_all.deb ...
Unpacking python3-flask (1.0.2-3) ...
Selecting previously unselected package python3-sqlalchemy.
Preparing to unpack .../27-python3-sqlalchemy_1.2.18+ds1-2_all.deb ...
Unpacking python3-sqlalchemy (1.2.18+ds1-2) ...
Selecting previously unselected package python3-flask-sqlalchemy.
Preparing to unpack .../28-python3-flask-sqlalchemy_2.1-3_all.deb ...
Unpacking python3-flask-sqlalchemy (2.1-3) ...
Selecting previously unselected package python3-pip.
Preparing to unpack .../29-python3-pip_18.1-5+rpt1_all.deb ...
Unpacking python3-pip (18.1-5+rpt1) ...
Setting up binutils-arm-none-eabi (2.31.1-11+rpi1+11) ...
Setting up python3-colorama (0.3.7-1) ...
Setting up libev4:armhf (1:4.25-1) ...
Setting up gcc-arm-none-eabi (15:7-2018-q2-6) ...
Setting up python3-itsdangerous (0.24+dfsg1-2) ...
Setting up dnsmasq-base (2.80-1+rpt1) ...
Setting up python3-click (7.0-1) ...
Setting up python3-markupsafe (1.1.0-1) ...
Setting up python3-tz (2019.1-1) ...
Setting up python3-sqlalchemy (1.2.18+ds1-2) ...
Setting up dnsmasq (2.80-1+rpt1) ...
Created symlink /etc/systemd/system/multi-user.target.wants/dnsmasq.service → /lib/systemd/system/dnsmasq.service.
Setting up python3-jinja2 (2.10-2) ...
Setting up hostapd (2:2.7+git20190128+0c1e29f-6+deb10u1) ...
Created symlink /etc/systemd/system/multi-user.target.wants/hostapd.service → /lib/systemd/system/hostapd.service.
Job for hostapd.service failed because the control process exited with error code.
See "systemctl status hostapd.service" and "journalctl -xe" for details.
Created symlink /etc/systemd/system/hostapd.service → /dev/null.
Setting up python3-werkzeug (0.14.1+dfsg1-4+deb10u1) ...
Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ...
Setting up libnewlib-dev (3.1.0.20181231-1) ...
Setting up python3-regex (0.1.20190207-1) ...
Setting up python3-dateutil (2.7.3-3) ...
Setting up python-pip-whl (18.1-5+rpt1) ...
Setting up libev-dev (1:4.25-1) ...
Setting up python3-tzlocal (1.5.1-1) ...
Setting up python3-lib2to3 (3.7.3-1) ...
Setting up python3-distutils (3.7.3-1) ...
Setting up python3-dateparser (0.7.1-1) ...
Setting up libncurses-dev:armhf (6.1+20181013-2+deb10u2) ...
Setting up python3-setuptools (40.8.0-1) ...
Setting up python3-flask (1.0.2-3) ...
Setting up libreadline-dev:armhf (7.0-5) ...
Setting up python3-gunicorn (19.9.0-1) ...
Setting up python3-pip (18.1-5+rpt1) ...
Setting up python3-flask-sqlalchemy (2.1-3) ...
Setting up gunicorn3 (19.9.0-1) ...
Processing triggers for install-info (6.5.0.dfsg.1-4+b1) ...
Processing triggers for libc-bin (2.28-10+rpi1) ...
Processing triggers for systemd (241-7~deb10u1+rpi1) ...
Processing triggers for man-db (2.8.5-2) ...
Processing triggers for dbus (1.12.16-1) ...
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting pip
  Downloading https://files.pythonhosted.org/packages/00/b6/9cfa56b4081ad13874b0c6f96af8ce16cfbc1cb06bedf8e9164ce5551ec1/pip-19.3.1-py2.py3-none-any.whl (1.4MB)
    100% |████████████████████████████████| 1.4MB 64kB/s
Installing collected packages: pip
  Found existing installation: pip 18.1
    Not uninstalling pip at /usr/lib/python3/dist-packages, outside environment /usr
    Can't uninstall 'pip'. No files were found to uninstall.
Successfully installed pip-19.3.1
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting datetime
  Downloading https://files.pythonhosted.org/packages/73/22/a5297f3a1f92468cc737f8ce7ba6e5f245fcfafeae810ba37bd1039ea01c/DateTime-4.3-py2.py3-none-any.whl (60kB)
     |████████████████████████████████| 61kB 312kB/s
Requirement already satisfied: pytz in /usr/lib/python3/dist-packages (from datetime) (2019.1)
Collecting zope.interface
  Downloading https://www.piwheels.org/simple/zope-interface/zope.interface-4.7.1-cp37-cp37m-linux_armv7l.whl (159kB)
     |████████████████████████████████| 163kB 51kB/s
Requirement already satisfied: setuptools in /usr/lib/python3/dist-packages (from zope.interface->datetime) (40.8.0)
Installing collected packages: zope.interface, datetime
Successfully installed datetime-4.3 zope.interface-4.7.1
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting Flask-Babel
  Downloading https://www.piwheels.org/simple/flask-babel/Flask_Babel-0.12.2-py3-none-any.whl
Requirement already satisfied: Flask in /usr/lib/python3/dist-packages (from Flask-Babel) (1.0.2)
Collecting Babel>=2.3
  Downloading https://files.pythonhosted.org/packages/2c/60/f2af68eb046c5de5b1fe6dd4743bf42c074f7141fe7b2737d3061533b093/Babel-2.7.0-py2.py3-none-any.whl (8.4MB)
     |████████████████████████████████| 8.4MB 67kB/s
Requirement already satisfied: Jinja2>=2.5 in /usr/lib/python3/dist-packages (from Flask-Babel) (2.10)
Requirement already satisfied: pytz>=2015.7 in /usr/lib/python3/dist-packages (from Babel>=2.3->Flask-Babel) (2019.1)
Installing collected packages: Babel, Flask-Babel
Successfully installed Babel-2.7.0 Flask-Babel-0.12.2
Cloning into 'proxmark3'...
remote: Enumerating objects: 22, done.
remote: Counting objects: 100% (22/22), done.
remote: Compressing objects: 100% (14/14), done.
remote: Total 46263 (delta 12), reused 16 (delta 8), pack-reused 46241
Receiving objects: 100% (46263/46263), 32.99 MiB | 69.00 KiB/s, done.
Resolving deltas: 100% (36033/36033), done.
Already up to date.

===================================================================
Platform name:     Proxmark3 rdv4
PLATFORM:          PM3RDV4
Platform extras:   No extra selected
Included options:  SMARTCARD FLASH LF HITAG ISO15693 LEGICRF ISO14443b ISO14443a ICLASS FELICA NFCBARCODE HFSNIFF
Standalone mode:   LF_SAMYRUN
===================================================================
[*] MAKE client/clean
[!] Platform definitions changed, cleaning bootrom/armsrc/recovery first...
[*] MAKE bootrom/clean
[*] MAKE fpga_compress/clean
[*] MAKE armsrc/clean
[*] MAKE recovery/clean
[*] MAKE mfkey/clean
[*] MAKE nonce2key/clean

===================================================================
Platform name:     Proxmark3 rdv4
PLATFORM:          PM3RDV4
Platform extras:   No extra selected
Included options:  SMARTCARD FLASH LF HITAG ISO15693 LEGICRF ISO14443b ISO14443a ICLASS FELICA NFCBARCODE HFSNIFF
Standalone mode:   LF_SAMYRUN
===================================================================
[*] MAKE client/all
[-] CC proxmark3.c
[-] CC uart/uart_posix.c
[-] CC uart/uart_win32.c
[-] CC ui.c
[-] CC ../common/commonutil.c
[-] CC util.c
[-] CC ../common/util_posix.c
[-] CC scandir.c
[-] CC ../common/crc16.c
[-] CC comms.c
[-] CC ../common/crapto1/crapto1.c
[-] CC ../common/crapto1/crypto1.c
[-] CC mifare/mifaredefault.c
[-] CC mifare/mfkey.c
[-] CC tea.c
[-] CC fido/additional_ca.c
[-] CC fido/cose.c
[-] CC fido/cbortools.c
[-] CC fido/fidocore.c
[-] CC crypto/asn1dump.c
[-] CC crypto/libpcrypto.c
[-] CC crypto/asn1utils.c
[-] CC cliparser/argtable3.c
[-] CC cliparser/cliparser.c
[-] CC loclass/cipher.c
[-] CC loclass/cipherutils.c
[-] CC loclass/ikeys.c
[-] CC loclass/elite_crack.c
[-] CC fileutils.c
[-] CC whereami.c
[-] CC mifare/mifarehost.c
[-] CC ../common/parity.c
[-] CC ../common/crc.c
[-] CC ../common/crc64.c
[-] CC ../common/legic_prng.c
[-] CC ../common/iso15693tools.c
[-] CC prng.c
[-] CC graph.c
[-] CC cmddata.c
[-] CC ../common/lfdemod.c
[-] CC emv/crypto_polarssl.c
[-] CC emv/crypto.c
[-] CC emv/emv_pk.c
[-] CC emv/emv_pki.c
[-] CC emv/emv_pki_priv.c
[-] CC emv/test/cryptotest.c
[-] CC emv/apduinfo.c
[-] CC emv/dump.c
[-] CC emv/tlv.c
[-] CC emv/emv_tags.c
[-] CC emv/dol.c
[-] CC emv/emvjson.c
[-] CC emv/emvcore.c
[-] CC emv/test/crypto_test.c
[-] CC emv/test/sda_test.c
[-] CC emv/test/dda_test.c
[-] CC emv/test/cda_test.c
[-] CC emv/cmdemv.c
[-] CC emv/emv_roca.c
[-] CC mifare/mifare4.c
[-] CC mifare/mad.c
[-] CC mifare/ndef.c
[-] CC cmdanalyse.c
[-] CC cmdhf.c
[-] CC cmdhflist.c
[-] CC aidsearch.c
[-] CC cmdhf14a.c
[-] CC cmdhf14b.c
[-] CC cmdhf15.c
[-] CC cmdhfepa.c
[-] CC cmdhflegic.c
[-] CC cmdhficlass.c
[-] CC cmdhfmf.c
[-] CC cmdhfmfu.c
[-] CC cmdhfmfp.c
[-] CC cmdhfmfhard.c
[-] CC hardnested/hardnested_bruteforce.c
[-] CC cmdhfmfdes.c
[-] CC cmdhftopaz.c
[-] CC cmdhffido.c
[-] CC cmdhffelica.c
[-] CC cmdhfthinfilm.c
[-] CC cmdhw.c
[-] CC cmdlf.c
[-] CC cmdlfawid.c
[-] CC cmdlfcotag.c
[-] CC cmdlfem4x.c
[-] CC cmdlffdx.c
[-] CC cmdlfguard.c
[-] CC cmdlfgallagher.c
[-] CC cmdlfhid.c
[-] CC cmdlfhitag.c
[-] CC cmdlfio.c
[-] CC cmdlfindala.c
[-] CC cmdlfjablotron.c
[-] CC cmdlfkeri.c
[-] CC cmdlfnexwatch.c
[-] CC cmdlfnedap.c
[-] CC cmdlfnoralsy.c
[-] CC cmdlfpac.c
[-] CC cmdlfparadox.c
[-] CC cmdlfpcf7931.c
[-] CC cmdlfpresco.c
[-] CC cmdlfpyramid.c
[-] CC cmdlfsecurakey.c
[-] CC cmdlft55xx.c
[-] CC cmdlfti.c
[-] CC cmdlfviking.c
[-] CC cmdlfvisa2000.c
[-] CC cmdlfmotorola.c
[-] CC cmdtrace.c
[-] CC cmdflashmem.c
[-] CC cmdflashmemspiffs.c
[-] CC cmdsmartcard.c
[-] CC cmdusart.c
[-] CC cmdwiegand.c
[-] CC cmdparser.c
[-] CC cmdmain.c
[-] CC pm3_binlib.c
[-] CC scripting.c
[-] CC cmdscript.c
[-] CC pm3_bitlib.c
[-] CC cmdcrc.c
[-] CC ../common/bucketsort.c
[-] CC flash.c
[-] CC wiegand_formats.c
[-] CC wiegand_formatutils.c
[-] CC hardnested/hardnested_bf_core.c
[-] CC hardnested/hardnested_bitarray_core.c
[-] CXX guidummy.cpp
[*] MAKE liblua for linux
[-] CC lapi.c
[-] CC lcode.c
[-] CC lctype.c
[-] CC ldebug.c
[-] CC ldo.c
[-] CC ldump.c
[-] CC lfunc.c
[-] CC lgc.c
[-] CC llex.c
[-] CC lmem.c
[-] CC lobject.c
[-] CC lopcodes.c
[-] CC lparser.c
[-] CC lstate.c
[-] CC lstring.c
[-] CC ltable.c
[-] CC ltm.c
[-] CC lundump.c
[-] CC lvm.c
[-] CC lzio.c
[-] CC lauxlib.c
[-] CC lbaselib.c
[-] CC lbitlib.c
[-] CC lcorolib.c
[-] CC ldblib.c
[-] CC liolib.c
[-] CC lmathlib.c
[-] CC loslib.c
[-] CC lstrlib.c
[-] CC ltablib.c
[-] CC loadlib.c
[-] CC linit.c
[=] AR liblua.a
[*] MAKE jansson
[-] CC dump.c
[-] CC error.c
[-] CC hashtable.c
[-] CC hashtable_seed.c
[-] CC load.c
[-] CC memory.c
[-] CC pack_unpack.c
[-] CC strbuffer.c
[-] CC strconv.c
[-] CC utf.c
[-] CC path.c
[-] CC value.c
[=] AR libjansson.a
[*] MAKE tinycbor
[-] CC cborencoder.c
[-] CC cborencoder_close_container_checked.c
[-] CC cborerrorstrings.c
[-] CC cborparser.c
[-] CC cborparser_dup_string.c
[-] CC cborpretty.c
[-] CC cbortojson.c
[-] CC cborvalidation.c
[=] AR tinycbor.a
[*] MAKE reveng
[-] CC bmpbit.c
[-] CC cli.c
[-] CC getopt.c
[-] CC model.c
[-] CC poly.c
[-] CC preset.c
[-] CC reveng.c
[-] CC bmpbit.c
[=] TEST bmptst
[=] AR libreveng.a
[*] MAKE mbedtls
[-] CC aes.c
[-] CC asn1parse.c
[-] CC asn1write.c
[-] CC base64.c
[-] CC bignum.c
[-] CC ctr_drbg.c
[-] CC entropy_poll.c
[-] CC entropy.c
[-] CC error.c
[-] CC timing.c
[-] CC ecp.c
[-] CC ecp_curves.c
[-] CC certs.c
[-] CC camellia.c
[-] CC blowfish.c
[-] CC cipher_wrap.c
[-] CC cipher.c
[-] CC cmac.c
[-] CC des.c
[-] CC ecdsa.c
[-] CC md.c
[-] CC md_wrap.c
[-] CC md5.c
[-] CC oid.c
[-] CC pem.c
[-] CC arc4.c
[-] CC pk.c
[-] CC pk_wrap.c
[-] CC pkwrite.c
[-] CC pkcs5.c
[-] CC pkcs12.c
[-] CC pkparse.c
[-] CC platform.c
[-] CC platform_util.c
[-] CC rsa.c
[-] CC rsa_internal.c
[-] CC sha1.c
[-] CC sha256.c
[-] CC sha512.c
[-] CC threading.c
[-] CC x509.c
[-] CC x509_crl.c
[-] CC x509_crt.c
[=] AR libmbedtls.a
[*] MAKE zlib
[-] CC deflate.c
[-] CC adler32.c
[-] CC trees.c
[-] CC zutil.c
[-] CC inflate.c
[-] CC inffast.c
[-] CC inftrees.c
[=] AR libz.a
[*] MAKE amiibo
[-] CC amiibo.c
[-] CC drbg.c
[-] CC keygen.c
[=] AR libamiibo.a
[=] GEN lualibs/pm3_cmd.lua
[=] GEN lualibs/mfc_default_keys.lua
[=] LD proxmark3
[*] MAKE bootrom/all
[=] GEN version.c
[-] CC version.c
[-] CC ram-reset.s
[-] CC flash-reset.s
[-] CC ../common_arm/usb_cdc.c
[-] CC ../common_arm/clocks.c
[-] CC bootrom.c
[=] LD obj/bootrom.elf
[=] GEN obj/bootrom.s19
[*] MAKE fpga_compress/all
[*] MAKE zlib
[-] CC deflate.c
[-] CC adler32.c
[-] CC trees.c
[-] CC zutil.c
[-] CC inflate.c
[-] CC inffast.c
[-] CC inftrees.c
[=] AR libz.a
[-] CC fpga_compress.c
[=] LD fpga_compress
[*] MAKE armsrc/all
[-] GEN fpga_version_info.c
[-] CC fpga_version_info.c
[-] GEN obj/fpga_all.bit.z
[-] GEN obj/fpga_all.o
[-] CC start.c
[-] CC iso15693.c
[-] CC ../common/iso15693tools.c
[-] CC thinfilm.c
[-] CC lfops.c
[-] CC lfsampling.c
[-] CC pcf7931.c
[-] CC ../common/lfdemod.c
[-] CC ../common/zlib/inflate.c
[-] CC ../common/zlib/inffast.c
[-] CC ../common/zlib/inftrees.c
[-] CC ../common/zlib/adler32.c
[-] CC ../common/zlib/zutil.c
[-] CC legicrf.c
[-] CC legicrfsim.c
[-] CC ../common/legic_prng.c
[-] CC flashmem.c
[-] CC i2c.c
[-] CC hitag2_crypto.c
[-] CC hitag2.c
[-] CC hitagS.c
[-] CC spiffs.c
[-] CC spiffs_cache.c
[-] CC spiffs_check.c
[-] CC spiffs_gc.c
[-] CC spiffs_nucleus.c
[-] CC spiffs_hydrogen.c
[-] CC appmain.c
[-] CC printf.c
[-] CC dbprint.c
[-] CC ../common/commonutil.c
[-] CC util.c
[-] CC string.c
[-] CC BigBuf.c
[-] CC ticks.c
[-] CC ../common_arm/clocks.c
[-] CC hfsnoop.c
[-] CC fpgaloader.c
[-] CC iso14443a.c
[-] CC mifareutil.c
[-] CC mifarecmd.c
[-] CC epa.c
[-] CC mifaresim.c
[-] CC iso14443b.c
[-] CC ../common/crapto1/crypto1.c
[-] CC des.c
[-] CC desfire_key.c
[-] CC mifaredesfire.c
[-] CC ../common/mbedtls/aes.c
[-] CC ../common/mbedtls/platform_util.c
[-] CC iclass.c
[-] CC optimized_cipher.c
[-] CC ../common/crc.c
[-] CC ../common/crc16.c
[-] CC ../common/crc32.c
[-] CC felica.c
[-] CC ../armsrc/Standalone/lf_samyrun.c
[-] CC ../common/parity.c
[-] CC ../common_arm/usb_cdc.c
[-] CC cmd.c
[-] GEN version.c
[-] CC version.c
[=] LD obj/fullimage.stage1.elf
[-] GEN obj/fullimage.nodata.bin
[-] GEN obj/fullimage.nodata.o
[-] GEN obj/fullimage.data.bin
[-] GEN obj/fullimage.data.bin.z
[-] GEN obj/fullimage.data.o
[=] LD obj/fullimage.elf
[=] GEN obj/fullimage.s19
[*] MAKE recovery/all
[=] GEN bootrom.bin
[=] GEN fullimage.bin
[=] GEN proxmark3_recovery.bin
[*] MAKE mfkey/all
[-] CC mfkey32.c
[-] CC ../../common/crapto1/crypto1.c
[-] CC ../../common/crapto1/crapto1.c
[-] CC ../../common/bucketsort.c
[=] LD mfkey32
[-] CC mfkey32v2.c
[=] LD mfkey32v2
[-] CC mfkey64.c
[=] LD mfkey64
[*] MAKE nonce2key/all
[-] CC nonce2key.c
[-] CC ../../common/crapto1/crypto1.c
[-] CC ../../common/crapto1/crapto1.c
[-] CC ../../common/bucketsort.c
[=] LD nonce2key

===================================================================
Platform name:     Proxmark3 rdv4
PLATFORM:          PM3RDV4
Platform extras:   No extra selected
Included options:  SMARTCARD FLASH LF HITAG ISO15693 LEGICRF ISO14443b ISO14443a ICLASS FELICA NFCBARCODE HFSNIFF
Standalone mode:   LF_SAMYRUN
===================================================================
[*] MAKE client/install
[@] Installing client to /usr/local...
[*] MAKE bootrom/install
[@] Installing bootrom to /usr/local...
[*] MAKE fpga_compress/install
[*] MAKE armsrc/install
[@] Installing fullimage to /usr/local...
[*] MAKE bootrom/all
make[1]: Nothing to be done for 'all'.
[*] MAKE fpga_compress/all
make[1]: Nothing to be done for 'all'.
[*] MAKE armsrc/all
make[1]: Nothing to be done for 'all'.
[*] MAKE recovery/install
[@] Installing recovery to /usr/local...
[*] MAKE mfkey/install
[@] Installing mfkey32 mfkey32v2 mfkey64 to /usr/local...
[*] MAKE nonce2key/install
[@] Installing nonce2key to /usr/local...
[*] MAKE client/all
make[1]: Nothing to be done for 'all'.
[*] MAKE recovery/all
make[1]: Nothing to be done for 'all'.
[*] MAKE mfkey/all
make[1]: Nothing to be done for 'all'.
[*] MAKE nonce2key/all
make[1]: Nothing to be done for 'all'.
[@] Installing common resources to /usr/local...
./rpi-setup.sh: line 5: /tmp/dhcpcd.conf: Permission denied
dnsmasq.service is not active, cannot reload.
What do you want your Wifi Password to be?:[wifi-password]
./rpi-setup.sh: line 29: wireless_password: command not found
Removed /etc/systemd/system/hostapd.service.
Synchronizing state of hostapd.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable hostapd
Job for hostapd.service failed because the control process exited with error code.
See "systemctl status hostapd.service" and "journalctl -xe" for details.
Created symlink /etc/systemd/system/multi-user.target.wants/proxmark3-web.service → /etc/systemd/system/proxmark3-web.service.
pi@raspberrypi:~/proxmark3-web $ sudo systemctl status hostapd.service
● hostapd.service - Advanced IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator
   Loaded: loaded (/lib/systemd/system/hostapd.service; enabled; vendor preset: enabled)
   Active: activating (auto-restart) (Result: exit-code) since Wed 2019-12-18 02:14:14 GMT; 355ms ago
  Process: 6531 ExecStart=/usr/sbin/hostapd -B -P /run/hostapd.pid -B $DAEMON_OPTS ${DAEMON_CONF} (code=exited, status=1/FAILURE)
pi@raspberrypi:~/proxmark3-web $ journalctl -xe
--
-- The job identifier is 8891 and the job result is failed.
Dec 18 02:14:27 raspberrypi systemd[1]: hostapd.service: Service RestartSec=2s expired, scheduling restart.
Dec 18 02:14:27 raspberrypi systemd[1]: hostapd.service: Scheduled restart job, restart counter is at 139.
-- Subject: Automatic restarting of a unit has been scheduled
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- Automatic restarting of the unit hostapd.service has been scheduled, as the result for
-- the configured Restart= setting for the unit.
Dec 18 02:14:27 raspberrypi systemd[1]: Stopped Advanced IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator.
-- Subject: A stop job for unit hostapd.service has finished
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- A stop job for unit hostapd.service has finished.
--
-- The job identifier is 8948 and the job result is done.
Dec 18 02:14:27 raspberrypi systemd[1]: Starting Advanced IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator...
-- Subject: A start job for unit hostapd.service has begun execution
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- A start job for unit hostapd.service has begun execution.
--
-- The job identifier is 8948.
Dec 18 02:14:27 raspberrypi hostapd[6550]: Configuration file: /etc/hostapd/hostapd.conf
Dec 18 02:14:27 raspberrypi hostapd[6550]: Line 14: invalid WPA passphrase length 0 (expected 8..63)
Dec 18 02:14:27 raspberrypi hostapd[6550]: WPA-PSK enabled, but PSK or passphrase is not configured.
Dec 18 02:14:27 raspberrypi hostapd[6550]: 2 errors found in configuration file '/etc/hostapd/hostapd.conf'
Dec 18 02:14:27 raspberrypi hostapd[6550]: Failed to set up interface with /etc/hostapd/hostapd.conf
Dec 18 02:14:27 raspberrypi hostapd[6550]: Failed to initialize interface
Dec 18 02:14:27 raspberrypi systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
-- Subject: Unit process exited
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- An ExecStart= process belonging to unit hostapd.service has exited.
--
-- The process' exit code is 'exited' and its exit status is 1.
Dec 18 02:14:27 raspberrypi systemd[1]: hostapd.service: Failed with result 'exit-code'.
-- Subject: Unit failed
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- The unit hostapd.service has entered the 'failed' state with result 'exit-code'.
Dec 18 02:14:27 raspberrypi systemd[1]: Failed to start Advanced IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator.
-- Subject: A start job for unit hostapd.service has failed
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- A start job for unit hostapd.service has finished with a failure.
--
-- The job identifier is 8948 and the job result is failed.
pi@raspberrypi:~/proxmark3-web $ sudo ./rpi-setup.sh
dnsmasq.service is not active, cannot reload.
What do you want your Wifi Password to be?:[wifi-password]
./rpi-setup.sh: line 29: wireless_password: command not found
Synchronizing state of hostapd.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable hostapd
Job for hostapd.service failed because the control process exited with error code.
See "systemctl status hostapd.service" and "journalctl -xe" for details.

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.