srcery-colors / srcery-terminal Goto Github PK

The autocomplete color in kitty is all but unreadable, even at very high brightness on my displays. Something with higher contrast would be beneficial for all users of Kitty.

Which color is this in the general kitty color scheme?

Hi,

Just wanted to share some minor progress on a theme for Steam. Like I have nothing else to do 💃 😄

Let me just be the first to say, that this is a big undertaking. It's a large surface to tough, with thousands of options.

Also, just asked Steam/Valve if I could share that work on e.g. GitHub 👍

Ed1t: Given a ambiguous answer.

Resources:

• https://developer.valvesoftware.com/wiki/Main_Page
• https://support.steampowered.com/kb_article.php?ref=1987-WYGJ-3701

So, I've setup both Terminal.app and Alacritty with the srcery colorscheme. And I noticed that the colors don't look identical. I took some screenshots to show this:

Terminal.app with Srcery colorscheme:

Alacritty with Srcery colorscheme:

I wasn't exactly sure why this would be. I checked the settings and confirmed that both are set correctly. For example, for the red color, Terminal.app is set to #EF2F27, and Alacritty is set to 0xEF2F27. So that should be identical. But it's not. I had a hunch that it has something to do with color correction, so I used the Apple Digital Colour Meter to check.

Terminal.app renders Generic RGB 239, 47, 39.

Alacritty renders 239, 47, 39 as Display Native Value.

This is why they look different, I'm guessing that Alacritty doesn't perform color correction. I'm not sure if that is a bug or a feature. But maybe the configs have to be adjusted slightly? I might manually perform color correction and pop the correct values into Alacritty so it's more consistent. Just leaving this here in case anyone else notices.

I found myself converting my i3 config to use colors from my .Xresources (https://i3wm.org/docs/userguide.html#xresources) to avoid copying stuff all over the place, and noticed that the follow colors are missing from the Xresources file:

set $orange #D75F00
set $bright_orange #FF8700

set $xgray1 #262626
set $xgray2 #303030
set $xgray3 #3A3A3A
set $xgray4 #444444
set $xgray5 #4E4E4E

set $hard_black #121212

looking at the .Xresources file, we see it only defines the "basic" 16 colors supported by every terminal. the README file also says:

Additionally Srcery uses some xterm 256 colors to pad out the color selection, no extra configuration needed.

... yet it's unclear how that works to me in the first place: is srcery just assuming those are the colors used by xterm? shouldn't we provide those colors in the Xresources for other applications to use?

I don't have any experience working with nodejs or npm, so not sure if it's my fault, but I'm unable to perform a make.

$ npm --version

npm WARN config tmp This setting is no longer used.  npm stores temporary files in a special
npm WARN config location in the cache, and they are managed by
npm WARN config     [`cacache`](http://npm.im/cacache).
8.19.2

$ make list

node:internal/modules/cjs/loader:1042
  throw err;
  ^

Error: Cannot find module 'commander'
...

$ npm install commander

npm WARN config tmp This setting is no longer used.  npm stores temporary files in a special
npm WARN config location in the cache, and they are managed by
npm WARN config     [`cacache`](http://npm.im/cacache).
npm ERR! code E401
npm ERR! 401 Unauthorized - GET https://npm.pkg.github.com/download/@srcery-colors/srcery-palette/1.0.2/57bedffc1e01582d6242ac0ad27af63d60ab105f - authentication token not provided

make node_modules and make give the same output as npm install commander.

da6f220#diff-2abd0fba69ef97aa38c3ab4c6e0026525e6d9377dfbab12ed82db4907f95865b

This commit breaks /terminal_app/srcery_terminal_app.terminal.

Hi,

Been at it again.. Couldn't have a tmux that didn't conform. Borrowed some ideas from Arctic Ice Studios & jimeh. Maybe at some point I'll extend it more to be a complete style — with options, etc., and at a later time we could create a new repo, so installing it via package manager would be possible.

Thoughts?

Initial code:

# Mein Status Style
set -g status-style fg=brightwhite,bg=brightblack

# Left Side Style
set -g status-left-style fg=brightwhite,bg=colour237
set -g status-left-length 40
set -g status-left "#[fg=brightwhite,bg=colour237,bold] #S #[fg=brightwhite,bg=colour236,nobold] #(whoami) #[fg=brightwhite,bg=brightblack] #I:#P #(page_mode) "

# Right side of status bar
set -g status-right-style fg=brightwhite,bg=colour237
set -g status-right-length 150
set -g status-right "#[fg=brightwhite,bg=brightblack] %H:%M #[fg=brightwhite,bg=colour236] %d-%b-%y #[fg=brightwhite,bg=colour237,bold] #H "

# Window status
set -g window-status-format "#[fg=default,bg=default,italics] #I:#W (#F) "
set -g window-status-current-format "#[fg=brightwhite,bg=colour236,bold] #I:#W (#F) "

# Current window status
set -g window-status-current-style fg=colour235,bg=colour100

# Pane border
set -g pane-border-style fg=colour236,bg=default
set -g pane-active-border-style fg=colour238,bg=default

# Clock mode
set -g clock-mode-colour brightwhite
set -g clock-mode-style 24

# Command message
set -g message-command-style fg=brightwhite,bg=brightblack

set -g mode-style fg=brightwhite,bold,bg=colour237

# Message
set -g message-style fg=brightwhite,bg=brightblack

# Pane number indicator
set -g display-panes-colour colour239
set -g display-panes-active-colour brightwhite

set -g window-status-separator ""

Review the whole structure to see what warrants a split from the extras repo.

Set some requirements to follow.

In the Srcery color scheme, which color should be used for the cursor?

These templates use color 3 (yellow)

• blink.dot
• kitty.dot
• pantheon.dot
• termite.dot
• tilix.dot
• windows_terminal.dot
• xresources.dot

But these templates use the foreground color

• chrome-secure-shell.dot
• iterm.dot
• mintty.dot
• terminal-app.dot
• terminator.dot
• xfce.dot

Initial attempt at adding support for the Windows Terminal.

{
  "profiles": {
    "defaults": {
      "colorScheme": "Srcery"
    }
  },

  "schemes": [
    {
      "name": "Srcery",
      "black": "#1c1b19",
      "red": "#ef2f27",
      "green": "#519f50",
      "yellow": "#fbb829",
      "blue": "#2c78bf",
      "purple": "#e02c6d",
      "cyan": "#0aaeb3",
      "white": "#D0BFA1",
      "brightBlack": "#918175",
      "brightRed": "#f75341",
      "brightGreen": "#98bc37",
      "brightYellow": "#fed06e",
      "brightBlue": "#68a8e4",
      "brightPurple": "#ff5c8f",
      "brightCyan": "#53fde9",
      "brightWhite": "#fce8c3",
      "foreground": "#fce8c3",
      "background": "#1c1b19",
      "cursorColor": "#FBB829",
      "selectionBackground": "#FCE8C3"
    }
  ]
}

When all the colors are viewed together, bright cyan (#53FDE9) has always stood out as being brighter than the others.

hex	color	CIELAB lightness	Hue
#1C1B19		9.8	40.0
#918175		55.1	25.7
#EF2F27		52.4	2.4
#F75341		58.4	5.9
#519F50		59.1	119.2
#98BC37		71.5	76.2
#FBB829		79.0	40.9
#FED06E		85.7	40.8
#2C78BF		49.2	209.0
#68A8E4		66.9	209.0
#E02C6D		50.4	338.3
#FF5C8F		62.4	341.2
#0AAEB3		64.6	181.8
#53FDE9		90.8	172.9
#BAA67F		68.9	39.7
#FCE8C3		92.7	38.9
#FF5F00		61.2	22.4
#FF8700		68.5	31.8

Here are some facts about the current bright cyan

• It has the highest CIELAB lightness.
• The lightness difference between cyan and bright cyan is greater than any other color (excluding black)
• The hue difference between cyan and bright cyan is one of the highest, after green and orange (excluding black)

Not knowing what process was used to generate the colors, I started with cyan (#0AAEB3) and used colorizer.org to increase the lightness in increments of 1 while not adjusting the hue. For reference, the first row is cyan, and the last row is the current bright cyan.

hex	color	CIELAB lightness	Hue
#0AAEB3		64.6	181.8
#2EBDC2		70.1	182.0
#32C0C4		71.1	181.6
#37C2C7		71.9	182.1
#3BC5CA		73.0	182.1
#3FC8CD		74.0	182.1
#43CBD0		75.1	182.1
#46CED2		76.1	181.7
#4AD0D5		76.9	182.2
#4ED3D8		78.0	182.2
#51D6DB		79.0	182.2
#55D9DE		80.1	182.2
#58DCE0		81.1	181.8
#5BDEE3		81.8	182.2
#5FE1E6		82.9	182.2
#62E4E9		83.9	182.2
#65E7EC		85.0	182.2
#68EAEF		86.0	182.2
#6CEDF1		87.0	181.8
#6FF0F4		88.1	181.8
#72F3F7		89.1	181.8
#75F6FA		90.1	181.8
#53FDE9		90.8	172.9

I think the bright cyan colors with a lightness in the low 80s are an improvement.

https://github.com/MindTooth/srcery.github.io

Please give feedback.

Not sure where I should put this request, but can you do stuff like this?

Terminal.app support was removed in commit c8feda5.

I would be happy to look into this and try to get it figured out as I depend on Terminal.app and the srcery color scheme, and this change bricks my setup.