rollingstar / modmii Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/modmii
Automatically exported from code.google.com/p/modmii
Can all of these be available from the downloads pages?
Waninkoko r9 Installer
Waninkoko r10 Installer
Waninkoko r11 Installer
Waninkoko r12 Installer
Waninkoko r13 Installer
Waninkoko r14 Installer
Waninkoko r15 Installer
Waninkoko r16 Installer
Waninkoko r17b Installer
Waninkoko r18 Installer
Waninkoko r19 Installer
Waninkoko r20 Installer
Waninkoko r21 Installer
-->Hermes
Hermes v1
Hermes v2
Hermes v3
Hermes v4
Hermes v5
Hermes v5.1
Hermes v5.1 Rodries Mod
-->D2X
d2x cIOS Installer v2.0
d2x cIOS Installer v2.1
d2x cIOS Installer v2.2
-->Wiigator & Waninkoko
Custom MIOS Installer (rev 01)
Custom MIOS Installer (rev 02)
Custom MIOS Installer (rev 03)
Custom MIOS Installer (rev 04)
Custom MIOS Installer (rev 05)
-->DrClipper
IOS236 Installer v3
IOS236 Installer v4
IOS236 Installer v5
IOS236 Installer v5 Burritoboy9984 Mod
-->Wiigator
cMIOS Patcher 0.2
You get the idea basically the latest and greatest and the historical versions
of every cios mios bc patcher and installer since they became compatible with
4.3 as the earliest release to support as of now
Other things that should be downloadable from your awesome program
WiiXplorer r212
Homebrew Filter Installer r34
Wii GSC 1.06b+
IOS16-64-v257.wad and other mothballed or panic and hide ios's
IOS 58 Installer
syscheck GX 1.0.0
syscheck 2.1.0.b11
Pimp My Wii 2.24
Original issue reported on code.google.com by [email protected]
on 9 Jul 2011 at 3:17
What steps will reproduce the problem?
1. Build NAND
2. Choose to install Photo Channel
What is the expected output? What do you see instead?
Expect to see Photo Channel in SysMenu on boot. Instead, see it's missing.
Using ShowMiiWads, the Photo Channel (Title ID: HAAA) is missing, which is
needed to show on the system menu. ModMii only installs v1.1, but needs both.
What version of the product are you using? On what operating system?
4.7.2 on XP and Windows 7
Please provide any additional information below.
Photo Channel Title (from NUSD): 0001000248414141
Original issue reported on code.google.com by [email protected]
on 28 Sep 2011 at 6:48
This project incorporates the following projects which use licenses that are
incompatible with Google Code/non OSI approved:
- Hypatia (restricts free redistribution)
- Unrar (discrimination against fields of endeavor)
Original issue reported on code.google.com by [email protected]
on 12 Aug 2011 at 2:29
What steps will reproduce the problem?
1. Generate a full install files for Uneek /+DI
2. Go to COPY_TO_USB\SNEEK folder and see the Font.bin missing
What is the expected output? What do you see instead?
It is expected to be there, but instead it is in COPY_TO_SD\SNEEK where it is
useless when using UNEEK instead of SNEEK
What version of the product are you using? On what operating system?
6.2.1, Windows 8 x64
Please provide any additional information below.
Nothing else.
Original issue reported on code.google.com by [email protected]
on 14 Dec 2012 at 10:21
What steps will reproduce the problem?
1. Try to download Switch2Uneek
2.
3.
What is the expected output? What do you see instead?
Getting the file.
What version of the product are you using? On what operating system?
4.7.0
Please provide any additional information below.
Looking at the code I think that Modmii is trying to download
http://nusad.googlecode.com/files/switch2uneek_ModMiiBundle_v2.zip
But I think that file is missing. Only switch2uneek_ModMiiBundle.zip is in that
directory.
I could be wrong though. But still I can not download S2U via Modmii.
Original issue reported on code.google.com by [email protected]
on 25 Aug 2011 at 10:22
Well..open-source...isn't that what GoogleCode is good for?
Original issue reported on code.google.com by [email protected]
on 2 Dec 2010 at 8:21
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 22 Aug 2012 at 11:17
What steps will reproduce the problem?
1.multi mod manager
2.ios 236 installer v5
3.priiloader v 0.7
4.usb loader forwarder channel v12
What is the expected output? What do you see instead?
all files should download error file missing
What version of the product are you using? On what operating system?
latest and windows 7
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 22 Aug 2012 at 11:10
I keep getting this error when I am using the Syscheck Updater section. I put
in my path for the .csv and it keep flashing the error for a quick second:
'ping' is not recognized as an internal or external command,
operable program or batch file.
I do see this in some other locations for a quick second.
What seems to be the cause?
Original issue reported on code.google.com by [email protected]
on 12 Nov 2011 at 2:46
Successfully downloaded modmii 6.2.6 on Win7.
After various selection in modmii.exe, I cannot download some modules, that is,
MMM, Wilbrand, IOS236 installer, Priiloader, USB-Loader Forwarder Channel.
Re-try again and again, but result is same. Other modules are downloaded
successfully.
Please advise what is problems and how to download all the modules.
My selection is
modmii wizard+guide
Y
4.3
K
W(Wilbrand)
input MAC address of my Wii
N
4.3
N
N
Y(USB loader)
2
3(Both)
D(Default)
Original issue reported on code.google.com by [email protected]
on 11 Apr 2013 at 4:13
What steps will reproduce the problem?
1. S (for sneek)
2. 4 (for bulk game extractor)
3.
What is the expected output? What do you see instead?
Extracted game. No space available.
What version of the product are you using? On what operating system?
4.3.5 on Windows XP (Spanish)
Please provide any additional information below.
See gbatemp forum.
Original issue reported on code.google.com by [email protected]
on 25 Nov 2010 at 3:36
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
awaiting response read error connection timed out
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 4 May 2012 at 3:24
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
ERROR NOT DOWNLOADED PROPERLY
What version of the product are you using? On what operating system?
6.1.2
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 2 May 2012 at 12:18
What steps will reproduce the problem?
1.Generate any kind of Sneek/Uneek nand.
2.Choose to install Priiloader in the wizard
3.Test in your Wii or look for loader.ini in
nands/pl_us/titles/0000001/0000002/data/, it is not there.
What is the expected output? What do you see instead?
When booting uneek/sneek if you press reset you should enter priiloader menu,
but instead you only get video configuration menú, and if you keep pressing it
continues to boot straight to System Menu. loader.ini is missing on nand and
maybe other files.
What version of the product are you using? On what operating system?
6.2.1, Windows 8 x64, tried also on XP x32 and the same.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 14 Dec 2012 at 10:32
What steps will reproduce the problem?
1. Run sysCheck Updater to get cIOS 202, 223, 224 wads
2. Install wads and get new sysCheck
3. Analyze sysCheck and still get prompted to install same cIOS
What is the expected output? What do you see instead?
Expect it to not prompt for cIOS that are already installed
What version of the product are you using? On what operating system?
4.7.3 on Win 7
Please provide any additional information below.
Will attach diff file and my syscheck, in case something's wrong with that.
Just need to remove the .0 from the versions in the cIOS. I also already had
cIOS222[38] hermes installed and that is listed as 4.0, not just 4 as the
ModMii wads do.
Also, I noticed in the code that when checking the MIOS version, there is a
comma after the version number, but only for v10, not for cMIOS v65535. I
wasn't sure if that was a typo, but I included a patch file for that as well.
Original issue reported on code.google.com by [email protected]
on 19 Oct 2011 at 1:01
Attachments:
What steps will reproduce the problem?
1.use Modmii download and install neek2o and postloader.
2.run postloader in neek2o nand.
3.after saved the config file, wii crash to a dump screen.
What is the expected output? What do you see instead?
Can't load postloader interface,but return to the wii menu.
What version of the product are you using? On what operating system?
Wii menu is 4.3u, neek2o nand menu is 4.3u too. postloader app version is
4.0.6, not the newest one.
Please provide any additional information below.
I replaced the postloader to 4.0.9 the newest version, then the problem was
solved. So pls check why Modmii hadn't download the newest version of
postloader.
Original issue reported on code.google.com by [email protected]
on 30 Oct 2012 at 7:30
What steps will reproduce the problem?
1. during download will get error that file not found for USB loader (not
wiiflow)
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 20 Dec 2011 at 2:57
DML Download Does not work! Wrong Adress inside!!!
Original issue reported on code.google.com by [email protected]
on 21 Sep 2012 at 9:01
If you would like to eliminate the long time to launch the system menu for the
first time you could add generation of the cdb.vff file
Feel free to use my implementation as you wish
http://code.google.com/p/dolphin-emu/source/detail?r=7291
Original issue reported on code.google.com by [email protected]
on 7 Jun 2011 at 4:03
download keeps failing.
Original issue reported on code.google.com by [email protected]
on 22 Dec 2011 at 4:44
What steps will reproduce the problem?
1.Fresh modding of a clean 4.3 PAL Wii System
2.Choosing Wiibrand Methode, Dark Blue Theme, USB Loader and copy to sd
3.After download prompt most of the cIOS and IOS files are reported missing,
reloading and deleting the temp files didn't help
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Modmii 6.3.1 Windows 7 Home 64
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 7 Mar 2014 at 6:03
What steps will reproduce the problem?
1. WiiFlow is not being downloaded for some reason. (It says missing at the end
of the download) I've tried downloading all 3 of the latest versions but
samething.. 6.2.3 / 6.2.2 / 6.2.1 all are missing WiiFlow. I've clicked on
RETRY after the completion of download but no difference.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
My Wii is 4.3U / Windows 7 Ultimate
Please provide any additional information below.
I clicked for BOTH WiiFlow and USB-loader
Thanks so much for your help & Happy New Year~~~ :)
Original issue reported on code.google.com by [email protected]
on 3 Jan 2013 at 5:15
Using modmii v6.2.7 on a modmii-softmodded 4.3U Wii.
I created a neek2o + UNEEK+DI USB emunand setup via the following steps: S, 3,
1 (v96), UD, D, D, U, 4.3, Y, N, N, Y, Y, <my real serial>, N, N, Y.
No guide is generated, so I copied the SD and USB files to those devices and
booted the Wii with them, then used MMM to install the neek2o and plforwarder
channel WADs.
With this setup I am able to run the neek2o channel to boot the emunand, but
holding down the reset button while the neek2o startup text is visible doesn't
cause Priiloader to appear. Instead, I just see the normal 10-20 second black
screen followed by a "health & safety" screen.
My overall goal is to try to get priiloader to run in the emunand on neek2o
boot, so that priiloader can in turn run postloader (or maybe wiiflow) instead
of booting to the system menu. I want to try this because the system menu never
appears (even after a couple of hours) when I have 800 WADs installed, and I
heard that both the system menu and possibly neek2o have channel number limits.
Original issue reported on code.google.com by [email protected]
on 20 Jul 2013 at 7:06
What steps will reproduce the problem?
1.Trying to download Joyflow forwarder/dol
2.
3.
What is the expected output? What do you see instead?
Getting the file, but no file downloads.
What version of the product are you using? On what operating system?
4.7.0
Please provide any additional information below.
Sorry man, but I think
http://nusad.googlecode.com/files/JoyFlow_Forwarder_wad_dol_v2.zip is missing.
Only the older version is present.
Original issue reported on code.google.com by [email protected]
on 26 Aug 2011 at 7:40
What steps will reproduce the problem?
1. L = Load Download Queue
2.
3.
What is the expected output? What do you see instead?
Expected to see list of saved queues. Instead see The syntax of the command is
incorrect" and ModMii crashes
What version of the product are you using? On what operating system?
4.7.4
Please provide any additional information below.
Text incorrect as
if exist temp\DLname
DV.txt del temp\DLnamesADV.txt>nul is on 2 lines and should be one
if exist temp\DLname\DV.txt del temp\DLnamesADV.txt>nul
This is just above the :EasterEggs section
Original issue reported on code.google.com by [email protected]
on 26 Oct 2011 at 7:50
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.