Firmware for the "battman" battery management system.

Clone repository.

git clone https://github.com/raphaelchang/battman-firmware.git

You'll need to install the following gcc arm cross compiler.

brew tap PX4/homebrew-px4
brew update
brew install gcc-arm-none-eabi

sudo apt-get install gcc-arm-none-eabi

To build the files, navigate to the root of the repository and run the following:

make

You'll need to install dfu-util v0.9 or higher.

On Mac, the homebrew version is adequate.

brew install dfu-util

On Ubuntu 14.04, dfu-util must be installed from source. See instructions here: http://dfu-util.sourceforge.net/build.html.

1. Plug in Battman to computer via USB.
2. Ensure that nothing is connected to the discharge output of the BMS.
3. Enable bootloader mode by reseting the board while the bootloader button is held down.
4. Ensure that no other boards are connected that are also in bootloader mode.
5. Run the following to build and upload the code. make upload