hawku / tabletdriver Goto Github PK
View Code? Open in Web Editor NEWLicense: GNU General Public License v3.0
License: GNU General Public License v3.0
The lag pops out sporadically, though it affects my gameplay pretty much, like making me choke.
Not an issue, but how do I export the area from my old wacom 5.3.5-3 drivers to these?
Windows Version: win 10
Tablet Driver version: 0.0.13
Tablet model: ctl-471
Update: I managed to get it to work properly with the following config:
#
# Wacom CTE-450
#
Tablet 0x056a 0x0017 0x000D 0x0001
Tablet 0x056a 0x0017 0xFF0D 0x0001
Name "Wacom CTE-450"
ReportLength 10
#ButtonMask 0xE0
MaxX 14760
MaxY 9230
MaxPressure 511
Width 147.6
Height 92.3
ButtonMask 0x10
InitFeature 0x02 0x02
(I also posted this as a reply on Reddit but I figured it wouldn't hurt to post here as well)
The driver recognizes the tablet correctly and provides basic functionality using this config (I had to guess a few values so that may be why it doesn't work perfectly):
#
# Wacom CTE-450
#
Tablet 0x056a 0x0017 0x000D 0x01
Name "Wacom CTE-450"
ReportLength 10
ButtonMask 0xE0
MaxX 14760
MaxY 9230
MaxPressure 511
Width 147.6
Height 92.3
The settings in the GUI don't do anything (not that I expected it to work at all since it's not officially supported), and it seems to be stuck in relative positioning.
Other than that it works fine and recognizes clicks nicely, about 10ms faster than the official wacom driver. It's clear that the Wacom driver is using quite a bit of smoothing which this was able to eliminate.
Here is the console output on startup: https://i.imgur.com/zcL6GcM.png
TL;DR: CTE-450 works but only in relative positioning, do I just need to tweak the config for absolute positioning to work properly or would you have to code it in to support it? I updated the config and it works now!
The drivers here set the ClickPressure to 500 by default, while with the official drivers the pressure was 0. This makes the tablet feel awkward to use, and many users might not know how to set it like it was before.
Setting a "Command After settings" sets it to how it was before.
ClickPressure 0
Windows Version: Windows 7 64-bit
Tablet Driver version: 0.0.13
Tablet model: CTL-490
When i click with the pen nib, it holds the click for a few milliseconds( <0.15s) resulting in unintended clicks.
Windows Version: Windows 10
Tablet Driver version: v0.0.17
Tablet model: CTL-490
my cth 680/s is not found by the driver after following correctly (i think) all the path of the read me file
Windows Version: 10
Tablet Driver version: 0.0.18V
Tablet model: ctl 490
I open up the install_vmulti driver and when i do it pops up with something that says "press enter to install" i do that and it disappears with nothing happening, ive tried running remove vmulti and it does the same thing. Ive uninstalled my wacom driver and installed the c++ thing it told me to do but nothing is working
These drivers are a godsend its amazing, when i use my pen with a taped nib it's way smoother and clearer than it ever was,,
but when its not taped theres still input lag (a lot less tho) when hovering, do you think its possible to remove it entirely? Thanks so much for doing this holy shit you're a legend
As a additional feature, it could be a good idea to implement the button handling of tablets
I don't think it's a hard feature and not necessarily a priority with all these tablet recognization issues but I may work on it if you want (at least for the CTL480)
If you launch a 2nd instance and change the area on it, both area from instance 1 and area from instance 2 will be active and you'll have 2 cursors. May be fixed by just maximizing the current instance when trying launch the program?
Did message you about this on reddit but you didn't reply eventually so thought I'd post it here too. #
Tried everything I can think of, all my Wacom drivers are uninstalled, tried restarting pc, running as admin, nothing works. Just getting the same error.
Video:
https://puu.sh/zHXU2/c572826d73.mp4
https://puu.sh/zHYb0/9872c3367d.mp4
As you see, the cursor suddenly "teleported" to the edge of my screen after it reached a certain position and sometimes stuck at there for a while. It causes inconvenience and greatly affects my daily use of tablet.
Windows Version: Windows 10
Tablet Driver version: 0.0.14
Tablet model: CTH-480
Could you maybe add cth-680/S i tryed myself but i couldn't work it out
I uninstalled my Wacom Drivers.
Restarted my computer.
Installed vmulti drivers.
Launched drivers, after setting up my settings it crashed when pressing 'SAVE'
-went offline
second day second try,
pressed 'SAVE', crash again.
Could you please add support for the PTH-660? From log:
2018-03-19 23:06:41 [HIDDevice] [DEBUG] HID Device: Vendor: 'Wacom Co.,Ltd.' Product: 'Wacom Intuos Pro M'
2018-03-19 23:06:41 [HIDDevice] [DEBUG] Vendor Id: 0x056A, Product Id: 0x0357
2018-03-19 23:06:41 [HIDDevice] [DEBUG] Usage Page: 0xFF00, Usage: 0x0005
2018-03-19 23:06:41 [HIDDevice] [DEBUG] FeatureLen: 2, InputLen: 44, OutputLen: 0
Thanks!
Windows Version: Windows 10
Tablet Driver version: 0.1.0
Tablet model: PTH-660 (Wacom Intuos Pro M)
Something like wacom's left hand mode for special use
https://i.imgur.com/SWhoH5L.png
Trying to install those drivers, wont work.
@hawku @kevinwlau please help me :(
Windows Version: Windows 7 32-bit (dont kill me, i know its trash)
Tablet Driver version: trying to install
Tablet model: CTL-480 (Intuos P S)
Hello, this isn't an issue so much as a suggestion! I think it would be convenient if the program booted on start, minimized. I made a thread on Reddit for a temporary solution to this quality of life issue; but it would be much more streamlined to incorporate it into the program itself.
I hope you consider it! Thank you for your time, you've concocted some phenomenal drivers and I want you to know that I, and I am sure many others are eternally grateful for them.
Is there somewhere I can donate to you? If so, message me on Reddit or comment in the thread linked below!
Temporary Solution Thread:
https://www.reddit.com/r/osugame/comments/85hv9u/guide_on_how_to_run_the_new_tablet_drivers_on/
Windows Version: Windows 10 Pro (Release 1709)
Tablet Driver version: 0.0.18
Tablet model: Wacom CTL-480
I was wondering if i could switch to left handed mode. I know i can turn the tablet over but that messe with my cable management and it blocks the buttons on my tablet.
Windows Version: 10 pro 64 bit
Tablet Driver version: 0.0.17
Tablet model: Huion H420
The tablet driver doesn't work on 32-bit Windows.
Windows Version: Windows 7 Home Premium 32-bit
Tablet Driver version: Not working
Tablet model: Wacom Intuos Draw CTL490-DW
The Cursor keeps shaking. Barely noticable while using Full Area, but it gets more intense on small Inputarea. "Raw Input" is on, "Map absolute raw input to the osu! window" is turned off.
Not that huge of a Problem, but might cause Issues on high CS.
Otherwise the Driver works really well, way better than Wacom 470 software.
Windows Version: Windows 10
Tablet Driver version: v.0.0.18
Tablet model: CTL-480 Wacom
Yeah yeah you can see all my USB devices plugged in.. and idc :P
The biggest issue with switching from the Wacom Drivers to these is that I do a lot of PhotoShop work, so I've lost access to binding the buttons on the pen to keyboard functions like the space bar, as well as the 4 buttons on the top of the tablet have no use now. Any chance you'd implement more keybind options for the pen and tablet buttons?
Like I said in my last issue, I'd love to donate, where can I do so?
Windows Version:
Tablet Driver version:
Tablet model:
Tablet not found, I had never installed any wacom drivers on my computer, even removed Wacom tablet from device manager and it doesn't work. I did a windows reset, didn't work. Latest version of windows 10. Wacom Intous Ctl-480. I've even tried removing everything from the config and leaving just the CTL-480 bits. Still didn't work. Please help.
2018-03-15 06:26:42 [INFO] >> MaxY 13500
2018-03-15 06:26:42 [INFO] >> MaxPressure 2047
2018-03-15 06:26:42 [INFO] >> Width 216.000
2018-03-15 06:26:42 [INFO] >> Height 135.000
2018-03-15 06:26:42 [INFO] >> InitFeature 0x02 0x02
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> # Wacom CTL-680
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x0323 0x000D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x0323 0x000D 0x0001
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x0323 0xFF0D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x0323 0xFF0D 0x0001
2018-03-15 06:26:42 [INFO] >> Name "Wacom CTL-680"
2018-03-15 06:26:42 [INFO] >> ReportLength 10
2018-03-15 06:26:42 [INFO] >> ButtonMask 0x40
2018-03-15 06:26:42 [INFO] >> MaxX 21600
2018-03-15 06:26:42 [INFO] >> MaxY 13500
2018-03-15 06:26:42 [INFO] >> MaxPressure 1023
2018-03-15 06:26:42 [INFO] >> Width 216.000
2018-03-15 06:26:42 [INFO] >> Height 135.000
2018-03-15 06:26:42 [INFO] >> InitFeature 0x02 0x02
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> # Wacom CTL-690
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x033D 0x000D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x033D 0x000D 0x0001
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x033D 0xFF0D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x033D 0xFF0D 0x0001
2018-03-15 06:26:42 [INFO] >> Name "Wacom CTL-690"
2018-03-15 06:26:42 [INFO] >> ReportLength 10
2018-03-15 06:26:42 [INFO] >> ButtonMask 0x40
2018-03-15 06:26:42 [INFO] >> MaxX 21600
2018-03-15 06:26:42 [INFO] >> MaxY 13500
2018-03-15 06:26:42 [INFO] >> MaxPressure 2047
2018-03-15 06:26:42 [INFO] >> Width 216.000
2018-03-15 06:26:42 [INFO] >> Height 135.000
2018-03-15 06:26:42 [INFO] >> InitFeature 0x02 0x02
2018-03-15 06:26:42 [INFO] >> Type WacomIntuos
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> # Wacom CTH-460
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00D1 0x000D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00D1 0x000D 0x0001
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00D1 0xFF0D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00D1 0xFF0D 0x0001
2018-03-15 06:26:42 [INFO] >> Name "Wacom CTH-460"
2018-03-15 06:26:42 [INFO] >> ReportLength 10
2018-03-15 06:26:42 [INFO] >> ButtonMask 0x40
2018-03-15 06:26:42 [INFO] >> MaxX 14720
2018-03-15 06:26:42 [INFO] >> MaxY 9200
2018-03-15 06:26:42 [INFO] >> MaxPressure 1023
2018-03-15 06:26:42 [INFO] >> Width 147.200
2018-03-15 06:26:42 [INFO] >> Height 92.000
2018-03-15 06:26:42 [INFO] >> InitFeature 0x02 0x02
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> # Wacom CTH-460(A)
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00D6 0x000D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00D6 0x000D 0x0001
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00D6 0xFF0D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00D6 0xFF0D 0x0001
2018-03-15 06:26:42 [INFO] >> Name "Wacom CTH-460(A)"
2018-03-15 06:26:42 [INFO] >> ReportLength 10
2018-03-15 06:26:42 [INFO] >> ButtonMask 0x40
2018-03-15 06:26:42 [INFO] >> MaxX 14720
2018-03-15 06:26:42 [INFO] >> MaxY 9200
2018-03-15 06:26:42 [INFO] >> MaxPressure 1023
2018-03-15 06:26:42 [INFO] >> Width 147.200
2018-03-15 06:26:42 [INFO] >> Height 92.000
2018-03-15 06:26:42 [INFO] >> InitFeature 0x02 0x02
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> # Wacom CTH-461
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00D2 0x000D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00D2 0x000D 0x0001
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00D2 0xFF0D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00D2 0xFF0D 0x0001
2018-03-15 06:26:42 [INFO] >> Name "Wacom CTH-461"
2018-03-15 06:26:42 [INFO] >> ReportLength 10
2018-03-15 06:26:42 [INFO] >> ButtonMask 0x40
2018-03-15 06:26:42 [INFO] >> MaxX 14720
2018-03-15 06:26:42 [INFO] >> MaxY 9200
2018-03-15 06:26:42 [INFO] >> MaxPressure 1023
2018-03-15 06:26:42 [INFO] >> Width 147.200
2018-03-15 06:26:42 [INFO] >> Height 92.000
2018-03-15 06:26:42 [INFO] >> InitFeature 0x02 0x02
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> # Wacom CTH-461(A)
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00D7 0x000D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00D7 0x000D 0x0001
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00D7 0xFF0D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00D7 0xFF0D 0x0001
2018-03-15 06:26:42 [INFO] >> Name "Wacom CTH-461(A)"
2018-03-15 06:26:42 [INFO] >> ReportLength 10
2018-03-15 06:26:42 [INFO] >> ButtonMask 0x40
2018-03-15 06:26:42 [INFO] >> MaxX 14720
2018-03-15 06:26:42 [INFO] >> MaxY 9200
2018-03-15 06:26:42 [INFO] >> MaxPressure 1023
2018-03-15 06:26:42 [INFO] >> Width 147.200
2018-03-15 06:26:42 [INFO] >> Height 92.000
2018-03-15 06:26:42 [INFO] >> InitFeature 0x02 0x02
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> # Wacom CTH-461SE
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00DA 0x000D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00DA 0x000D 0x0001
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00DA 0xFF0D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00DA 0xFF0D 0x0001
2018-03-15 06:26:42 [INFO] >> Name "Wacom CTH-461SE"
2018-03-15 06:26:42 [INFO] >> ReportLength 10
2018-03-15 06:26:42 [INFO] >> ButtonMask 0x40
2018-03-15 06:26:42 [INFO] >> MaxX 14720
2018-03-15 06:26:42 [INFO] >> MaxY 9200
2018-03-15 06:26:42 [INFO] >> MaxPressure 1023
2018-03-15 06:26:42 [INFO] >> Width 147.200
2018-03-15 06:26:42 [INFO] >> Height 92.000
2018-03-15 06:26:42 [INFO] >> InitFeature 0x02 0x02
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> # Wacom CTH-470
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00DE 0x000D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00DE 0x000D 0x0001
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00DE 0xFF0D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00DE 0xFF0D 0x0001
2018-03-15 06:26:42 [INFO] >> Name "Wacom CTH-470"
2018-03-15 06:26:42 [INFO] >> ReportLength 10
2018-03-15 06:26:42 [INFO] >> ButtonMask 0x40
2018-03-15 06:26:42 [INFO] >> MaxX 14720
2018-03-15 06:26:42 [INFO] >> MaxY 9200
2018-03-15 06:26:42 [INFO] >> MaxPressure 1023
2018-03-15 06:26:42 [INFO] >> Width 147.200
2018-03-15 06:26:42 [INFO] >> Height 92.000
2018-03-15 06:26:42 [INFO] >> InitFeature 0x02 0x02
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> # Wacom CTH-490
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x033C 0x000D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x033C 0x000D 0x0001
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x033C 0xFF0D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x033C 0xFF0D 0x0001
2018-03-15 06:26:42 [INFO] >> Name "Wacom CTH-490"
2018-03-15 06:26:42 [INFO] >> ReportLength 10
2018-03-15 06:26:42 [INFO] >> ButtonMask 0x40
2018-03-15 06:26:42 [INFO] >> MaxX 15200
2018-03-15 06:26:42 [INFO] >> MaxY 9500
2018-03-15 06:26:42 [INFO] >> MaxPressure 2047
2018-03-15 06:26:42 [INFO] >> Width 152.000
2018-03-15 06:26:42 [INFO] >> Height 95.000
2018-03-15 06:26:42 [INFO] >> InitFeature 0x02 0x02
2018-03-15 06:26:42 [INFO] >> Type WacomIntuos
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> # Wacom CTH-661
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00D3 0x000D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00D3 0x000D 0x0001
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00D3 0xFF0D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00D3 0xFF0D 0x0001
2018-03-15 06:26:42 [INFO] >> Name "Wacom CTH-661"
2018-03-15 06:26:42 [INFO] >> ReportLength 10
2018-03-15 06:26:42 [INFO] >> ButtonMask 0x40
2018-03-15 06:26:42 [INFO] >> MaxX 21648
2018-03-15 06:26:42 [INFO] >> MaxY 13700
2018-03-15 06:26:42 [INFO] >> MaxPressure 1023
2018-03-15 06:26:42 [INFO] >> Width 216.480
2018-03-15 06:26:42 [INFO] >> Height 137.000
2018-03-15 06:26:42 [INFO] >> InitFeature 0x02 0x02
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> # Wacom CTH-661(A)
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00D8 0x000D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00D8 0x000D 0x0001
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00D8 0xFF0D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00D8 0xFF0D 0x0001
2018-03-15 06:26:42 [INFO] >> Name "Wacom CTH-661(A)"
2018-03-15 06:26:42 [INFO] >> ReportLength 10
2018-03-15 06:26:42 [INFO] >> ButtonMask 0x40
2018-03-15 06:26:42 [INFO] >> MaxX 21648
2018-03-15 06:26:42 [INFO] >> MaxY 13700
2018-03-15 06:26:42 [INFO] >> MaxPressure 1023
2018-03-15 06:26:42 [INFO] >> Width 216.480
2018-03-15 06:26:42 [INFO] >> Height 137.000
2018-03-15 06:26:42 [INFO] >> InitFeature 0x02 0x02
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> # Wacom CTH-661SE
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00DB 0x000D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00DB 0x000D 0x0001
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00DB 0xFF0D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00DB 0xFF0D 0x0001
2018-03-15 06:26:42 [INFO] >> Name "Wacom CTH-661SE"
2018-03-15 06:26:42 [INFO] >> ReportLength 10
2018-03-15 06:26:42 [INFO] >> ButtonMask 0x40
2018-03-15 06:26:42 [INFO] >> MaxX 21648
2018-03-15 06:26:42 [INFO] >> MaxY 13700
2018-03-15 06:26:42 [INFO] >> MaxPressure 1023
2018-03-15 06:26:42 [INFO] >> Width 216.480
2018-03-15 06:26:42 [INFO] >> Height 137.000
2018-03-15 06:26:42 [INFO] >> InitFeature 0x02 0x02
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> # Wacom CTH-480
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x0302 0x000D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x0302 0x000D 0x0001
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x0302 0xFF0D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x0302 0xFF0D 0x0001
2018-03-15 06:26:42 [INFO] >> Name "Wacom CTH-480"
2018-03-15 06:26:42 [INFO] >> ReportLength 10
2018-03-15 06:26:42 [INFO] >> ButtonMask 0x40
2018-03-15 06:26:42 [INFO] >> MaxX 15200
2018-03-15 06:26:42 [INFO] >> MaxY 9500
2018-03-15 06:26:42 [INFO] >> MaxPressure 1023
2018-03-15 06:26:42 [INFO] >> Width 152.000
2018-03-15 06:26:42 [INFO] >> Height 95.000
2018-03-15 06:26:42 [INFO] >> InitFeature 0x02 0x02
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> # Wacom CTH-670
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00DF 0x000D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00DF 0x000D 0x0001
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x00DF 0xFF0D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x00DF 0xFF0D 0x0001
2018-03-15 06:26:42 [INFO] >> Name "Wacom CTH-670"
2018-03-15 06:26:42 [INFO] >> ReportLength 10
2018-03-15 06:26:42 [INFO] >> ButtonMask 0x40
2018-03-15 06:26:42 [INFO] >> MaxX 21648
2018-03-15 06:26:42 [INFO] >> MaxY 13700
2018-03-15 06:26:42 [INFO] >> MaxPressure 1023
2018-03-15 06:26:42 [INFO] >> Width 216.480
2018-03-15 06:26:42 [INFO] >> Height 137.000
2018-03-15 06:26:42 [INFO] >> InitFeature 0x02 0x02
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> # Wacom CTH-680
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x0303 0x000D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x0303 0x000D 0x0001
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x0303 0xFF0D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x0303 0xFF0D 0x0001
2018-03-15 06:26:42 [INFO] >> Name "Wacom CTH-680"
2018-03-15 06:26:42 [INFO] >> ReportLength 10
2018-03-15 06:26:42 [INFO] >> ButtonMask 0x40
2018-03-15 06:26:42 [INFO] >> MaxX 21600
2018-03-15 06:26:42 [INFO] >> MaxY 13500
2018-03-15 06:26:42 [INFO] >> MaxPressure 1023
2018-03-15 06:26:42 [INFO] >> Width 216.000
2018-03-15 06:26:42 [INFO] >> Height 135.000
2018-03-15 06:26:42 [INFO] >> InitFeature 0x02 0x02
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> # Wacom CTH-690
2018-03-15 06:26:42 [INFO] >> #
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x033E 0x000D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x033E 0x000D 0x0001
2018-03-15 06:26:42 [INFO] >> Tablet 0x056A 0x033E 0xFF0D 0x0001
2018-03-15 06:26:42 [ERROR] Can't open HID tablet 0x056A 0x033E 0xFF0D 0x0001
2018-03-15 06:26:42 [INFO] >> Name "Wacom CTH-690"
2018-03-15 06:26:42 [INFO] >> ReportLength 10
2018-03-15 06:26:42 [INFO] >> ButtonMask 0x40
2018-03-15 06:26:42 [INFO] >> MaxX 21600
2018-03-15 06:26:42 [INFO] >> MaxY 13500
2018-03-15 06:26:42 [INFO] >> MaxPressure 2047
2018-03-15 06:26:42 [INFO] >> Width 216.000
2018-03-15 06:26:42 [INFO] >> Height 135.000
2018-03-15 06:26:42 [INFO] >> InitFeature 0x02 0x02
2018-03-15 06:26:42 [INFO] >> Type WacomIntuos
2018-03-15 06:26:42 [INFO] >> # Count: 28
2018-03-15 06:26:42 [INFO] >> # Tablets:
2018-03-15 06:26:42 [INFO] >> # - PTH-451
2018-03-15 06:26:42 [INFO] >> # - PTH-651
2018-03-15 06:26:42 [INFO] >> # - PTH-851
2018-03-15 06:26:42 [INFO] >> # - CTL-460
2018-03-15 06:26:42 [INFO] >> # - CTL-470
2018-03-15 06:26:42 [INFO] >> # - CTL-471
2018-03-15 06:26:42 [INFO] >> # - CTL-472
2018-03-15 06:26:42 [INFO] >> # - CTL-480
2018-03-15 06:26:42 [INFO] >> # - CTL-490
2018-03-15 06:26:42 [INFO] >> # - CTL-660
2018-03-15 06:26:42 [INFO] >> # - CTL-671
2018-03-15 06:26:42 [INFO] >> # - CTL-672
2018-03-15 06:26:42 [INFO] >> # - CTL-680
2018-03-15 06:26:42 [INFO] >> # - CTL-690
2018-03-15 06:26:42 [INFO] >> # - CTH-460
2018-03-15 06:26:42 [INFO] >> # - CTH-460(A)
2018-03-15 06:26:42 [INFO] >> # - CTH-461
2018-03-15 06:26:42 [INFO] >> # - CTH-461(A)
2018-03-15 06:26:42 [INFO] >> # - CTH-461SE
2018-03-15 06:26:42 [INFO] >> # - CTH-470
2018-03-15 06:26:42 [INFO] >> # - CTH-490
2018-03-15 06:26:42 [INFO] >> # - CTH-661
2018-03-15 06:26:42 [INFO] >> # - CTH-661(A)
2018-03-15 06:26:42 [INFO] >> # - CTH-661SE
2018-03-15 06:26:42 [INFO] >> # - CTH-480
2018-03-15 06:26:42 [INFO] >> # - CTH-670
2018-03-15 06:26:42 [INFO] >> # - CTH-680
2018-03-15 06:26:42 [INFO] >> # - CTH-690
2018-03-15 06:26:42 [INFO] / End of 'config\wacom.cfg'
2018-03-15 06:26:42 [INFO] >> CheckTablet
2018-03-15 06:26:42 [ERROR] Tablet not found!
2018-03-15 06:26:42 [ERROR] Check the list of supported tablets from the GitHub page.
2018-03-15 06:26:42 [ERROR] http://github.com/hawku/TabletDriver
Driver stopped. Restarting!
Windows Version:
Tablet Driver version:
Tablet model:
With these drivers for some reason my hover distance is far lower than with wacom drivers.
I'd say it's about 5cm with wacom while with these it's only like 2cm.
Also when I accidentally tap the tablet my cursor messes up a bit, I've seen a lot of reports about this being the case even on the wacom drivers but I only have this issue here.
I've attached my wacom config, area is the exact same and all buttons that can be disabled are disabled.
Backup.txt
On console it just says ERROR! Can't start driver. Access is denied." I uninstalled old wacom drivers. Reinstalling no good either.
I'm not sure if this should be considered an issue or if it was intended but I feel like it should be addressed anyways.
The tablet's original report rate is somewhere around ~133pps. According to the pattern tests you've done on the other Wacom drivers, this matches that description. I checked my tablet's report rate while on TabletDriverV0.0.13 and it's running at about ~500pps. I've also tested a Wacom driver (6.3.15-1) after and it matches the tablet's original report rate of ~133pps. I've uploaded the results of both tablet drivers to see. I used a mouse rate checker (http://www.softpedia.com/get/System/System-Miscellaneous/Mouse-Rate-Checker.shtml) as well as osu!'s ingame report rate checker in the screenshots.
The higher report rate actually sounds great but I'm worried about whether or not this could be a bad thing. I'm not very tech savvy so any clarifications about this would be appreciated!
Windows Version: 10
Tablet Driver version: TabletDriverV0.0.13
Tablet model: Wacom Intuos CTH-480
My tablet is PTH-450, which might be a earlier version of PTH-451. Intuitively I think they are pretty similar so it should be easy to add a support for it.
I tried to add a configuration to tablet.cfg
but it seems that doesn't work. The windows device manager tells that the VID is 0x056A and PID is 0x0026. I did not figure out how to find the HID Usage Page information so I just copy the data of PTH-451, but it turns out to be a misconfiguration.. The driver can't find my tablet.
Is that possible to add such a support for PTH-450? Or any comments for DIY?
As stated after executing the TabletDriverGUI.exe nothing happens. I followed all the steps according to the instructions with no luck whatsoever. Only thing that happens is a really short loading icon with nothing after that.
Windows Version: Win 10 64Bit
Tablet Driver version: V0.1.0
Tablet model: CTL-490
Hi,
Thanks for making the source code public ๐
Would you be able to also include where we can get the driver_vmulti
(and driver_huion
) stuff from that is included in the builds you posted?
I could only find https://github.com/djpnewton/vmulti but I wasn't sure if that is it.
It would also be cool if we could get automated builds setup using something like https://www.appveyor.com/. So you can just commit to Github and let appveyor deal with the rest.
Before it said MSVCP140.dll was missing, and when i installed it I get this error. I don't know how to fix this, please help. https://i.imgur.com/0CHR8dm.png
When I click on 2 buttons on stylus(my thumb is holding them while playing) my cursor glitches and appears twice on my monitor and also bugs a lot by teleporting from circles, I tried to disable them, didnt work.
This problem occurs on all verisions by far.
Windows Version: windows 7
Tablet Driver version: 0.0.16
Tablet model: ctl480,but using 471 pen.
My TabletGUI keeps telling me that the Driver has stopped and tries to restart but the tablet init fails, i've tried to reinstall my drivers already but to no avail.
https://cdn.discordapp.com/attachments/376062244523474964/425406328023023618/unknown.png
Windows Version: Windows 10 Home
Tablet Driver version: 6.3.29-4
Tablet model: CTH-480
Hello! I was noticing after using the included startup on boot, that TabletDriverGUI.exe was no longer booting with high priority and I was experiencing some input lag for some reason. TabletDriverService boots with high priority, but it was the GUI priority that was causing the delay for some reason. Could you please make it so it boots into high priority? Thanks
Windows Version:
Tablet Driver version:
Tablet model:
After setting the monitor, and closing the program, the monitor displayed will get reset every time, so tablet won't work without letting TabletDriverGUI opened
Windows Version: 10
Tablet Driver version: 0.0.14
Tablet model: CTL-471
Personally not left-handed but it's how I use my tablet. Loving the new drivers but because of this I can't adjust to the new posture. Would this be possible in the future, or is it possible now? Thanks.
##Console output
2018-03-15 18:22:59 [INFO] >> # Gaomon S56K
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> Tablet "{62F12D4C-3431-4EFD-8DD7-8E9AAB18D30C}" 201 HUION_T156
2018-03-15 18:22:59 [ERROR] Can't open USB tablet '{62F12D4C-3431-4EFD-8DD7-8E9AAB18D30C}' 201 'HUION_T156'
2018-03-15 18:22:59 [INFO] >> Name "Gaomon S56K"
2018-03-15 18:22:59 [INFO] >> ReportId 0x07
2018-03-15 18:22:59 [INFO] >> ReportLength 8
2018-03-15 18:22:59 [INFO] >> ButtonMask 0x80
2018-03-15 18:22:59 [INFO] >> MaxX 25196
2018-03-15 18:22:59 [INFO] >> MaxY 18896
2018-03-15 18:22:59 [INFO] >> MaxPressure 2047
2018-03-15 18:22:59 [INFO] >> Width 160.0
2018-03-15 18:22:59 [INFO] >> Height 120.0
2018-03-15 18:22:59 [INFO] / End of 'config\tablet.cfg'
2018-03-15 18:22:59 [INFO] >> Include "config\wacom.cfg"
2018-03-15 18:22:59 [INFO] \ Reading 'config\wacom.cfg'
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> # This file is automatically generated from these sources:
2018-03-15 18:22:59 [INFO] >> # https://github.com/torvalds/linux/blob/master/drivers/hid/wacom_wac.c
2018-03-15 18:22:59 [INFO] >> # https://github.com/linuxwacom/input-wacom/wiki/Device-IDs
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> # Wacom PTH-451
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x0314 0x000D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x0314 0x000D 0x0001
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x0314 0xFF0D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x0314 0xFF0D 0x0001
2018-03-15 18:22:59 [INFO] >> Name "Wacom PTH-451"
2018-03-15 18:22:59 [INFO] >> ReportLength 10
2018-03-15 18:22:59 [INFO] >> ButtonMask 0x40
2018-03-15 18:22:59 [INFO] >> MaxX 31496
2018-03-15 18:22:59 [INFO] >> MaxY 19685
2018-03-15 18:22:59 [INFO] >> MaxPressure 2047
2018-03-15 18:22:59 [INFO] >> Width 157.480
2018-03-15 18:22:59 [INFO] >> Height 98.425
2018-03-15 18:22:59 [INFO] >> InitFeature 0x02 0x02
2018-03-15 18:22:59 [INFO] >> Type WacomIntuos
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> # Wacom PTH-651
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x0315 0x000D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x0315 0x000D 0x0001
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x0315 0xFF0D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x0315 0xFF0D 0x0001
2018-03-15 18:22:59 [INFO] >> Name "Wacom PTH-651"
2018-03-15 18:22:59 [INFO] >> ReportLength 10
2018-03-15 18:22:59 [INFO] >> ButtonMask 0x40
2018-03-15 18:22:59 [INFO] >> MaxX 44704
2018-03-15 18:22:59 [INFO] >> MaxY 27940
2018-03-15 18:22:59 [INFO] >> MaxPressure 2047
2018-03-15 18:22:59 [INFO] >> Width 223.520
2018-03-15 18:22:59 [INFO] >> Height 139.700
2018-03-15 18:22:59 [INFO] >> InitFeature 0x02 0x02
2018-03-15 18:22:59 [INFO] >> Type WacomIntuos
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> # Wacom PTH-851
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x0317 0x000D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x0317 0x000D 0x0001
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x0317 0xFF0D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x0317 0xFF0D 0x0001
2018-03-15 18:22:59 [INFO] >> Name "Wacom PTH-851"
2018-03-15 18:22:59 [INFO] >> ReportLength 10
2018-03-15 18:22:59 [INFO] >> ButtonMask 0x40
2018-03-15 18:22:59 [INFO] >> MaxX 65024
2018-03-15 18:22:59 [INFO] >> MaxY 40640
2018-03-15 18:22:59 [INFO] >> MaxPressure 2047
2018-03-15 18:22:59 [INFO] >> Width 325.120
2018-03-15 18:22:59 [INFO] >> Height 203.200
2018-03-15 18:22:59 [INFO] >> InitFeature 0x02 0x02
2018-03-15 18:22:59 [INFO] >> Type WacomIntuos
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> # Wacom CTL-460
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x00D4 0x000D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x00D4 0x000D 0x0001
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x00D4 0xFF0D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x00D4 0xFF0D 0x0001
2018-03-15 18:22:59 [INFO] >> Name "Wacom CTL-460"
2018-03-15 18:22:59 [INFO] >> ReportLength 10
2018-03-15 18:22:59 [INFO] >> ButtonMask 0x40
2018-03-15 18:22:59 [INFO] >> MaxX 14720
2018-03-15 18:22:59 [INFO] >> MaxY 9200
2018-03-15 18:22:59 [INFO] >> MaxPressure 1023
2018-03-15 18:22:59 [INFO] >> Width 147.200
2018-03-15 18:22:59 [INFO] >> Height 92.000
2018-03-15 18:22:59 [INFO] >> InitFeature 0x02 0x02
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> # Wacom CTL-470
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x00DD 0x000D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x00DD 0x000D 0x0001
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x00DD 0xFF0D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x00DD 0xFF0D 0x0001
2018-03-15 18:22:59 [INFO] >> Name "Wacom CTL-470"
2018-03-15 18:22:59 [INFO] >> ReportLength 10
2018-03-15 18:22:59 [INFO] >> ButtonMask 0x40
2018-03-15 18:22:59 [INFO] >> MaxX 14720
2018-03-15 18:22:59 [INFO] >> MaxY 9200
2018-03-15 18:22:59 [INFO] >> MaxPressure 1023
2018-03-15 18:22:59 [INFO] >> Width 147.200
2018-03-15 18:22:59 [INFO] >> Height 92.000
2018-03-15 18:22:59 [INFO] >> InitFeature 0x02 0x02
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> # Wacom CTL-471
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x0300 0x000D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x0300 0x000D 0x0001
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x0300 0xFF0D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x0300 0xFF0D 0x0001
2018-03-15 18:22:59 [INFO] >> Name "Wacom CTL-471"
2018-03-15 18:22:59 [INFO] >> ReportLength 10
2018-03-15 18:22:59 [INFO] >> ButtonMask 0x40
2018-03-15 18:22:59 [INFO] >> MaxX 14720
2018-03-15 18:22:59 [INFO] >> MaxY 9225
2018-03-15 18:22:59 [INFO] >> MaxPressure 1023
2018-03-15 18:22:59 [INFO] >> Width 147.200
2018-03-15 18:22:59 [INFO] >> Height 92.250
2018-03-15 18:22:59 [INFO] >> InitFeature 0x02 0x02
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> # Wacom CTL-472
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x037A 0x000D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x037A 0x000D 0x0001
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x037A 0xFF0D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x037A 0xFF0D 0x0001
2018-03-15 18:22:59 [INFO] >> Name "Wacom CTL-472"
2018-03-15 18:22:59 [INFO] >> ReportLength 10
2018-03-15 18:22:59 [INFO] >> ButtonMask 0x40
2018-03-15 18:22:59 [INFO] >> MaxX 15200
2018-03-15 18:22:59 [INFO] >> MaxY 9500
2018-03-15 18:22:59 [INFO] >> MaxPressure 2047
2018-03-15 18:22:59 [INFO] >> Width 152.000
2018-03-15 18:22:59 [INFO] >> Height 95.000
2018-03-15 18:22:59 [INFO] >> InitFeature 0x02 0x02
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> # Wacom CTL-480
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x030E 0x000D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x030E 0x000D 0x0001
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x030E 0xFF0D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x030E 0xFF0D 0x0001
2018-03-15 18:22:59 [INFO] >> Name "Wacom CTL-480"
2018-03-15 18:22:59 [INFO] >> ReportLength 10
2018-03-15 18:22:59 [INFO] >> ButtonMask 0x40
2018-03-15 18:22:59 [INFO] >> MaxX 15200
2018-03-15 18:22:59 [INFO] >> MaxY 9500
2018-03-15 18:22:59 [INFO] >> MaxPressure 1023
2018-03-15 18:22:59 [INFO] >> Width 152.000
2018-03-15 18:22:59 [INFO] >> Height 95.000
2018-03-15 18:22:59 [INFO] >> InitFeature 0x02 0x02
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> # Wacom CTL-490
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x033B 0x000D 0x0001
2018-03-15 18:22:59 [INFO] Tablet open!
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x033B 0xFF0D 0x0001
2018-03-15 18:22:59 [INFO] >> Name "Wacom CTL-490"
2018-03-15 18:22:59 [INFO] Tablet name = 'Wacom CTL-490'
2018-03-15 18:22:59 [INFO] >> ReportLength 10
2018-03-15 18:22:59 [INFO] Tablet report length = 10
2018-03-15 18:22:59 [INFO] >> ButtonMask 0x40
2018-03-15 18:22:59 [INFO] Tablet button mask = 40
2018-03-15 18:22:59 [INFO] >> MaxX 15200
2018-03-15 18:22:59 [INFO] Tablet max X = 15200
2018-03-15 18:22:59 [INFO] >> MaxY 9500
2018-03-15 18:22:59 [INFO] Tablet max Y = 9500
2018-03-15 18:22:59 [INFO] >> MaxPressure 2047
2018-03-15 18:22:59 [INFO] Tablet max pressure = 2047
2018-03-15 18:22:59 [INFO] >> Width 152.000
2018-03-15 18:22:59 [INFO] Tablet width = 152.00 mm
2018-03-15 18:22:59 [INFO] >> Height 95.000
2018-03-15 18:22:59 [INFO] Tablet height = 95.00 mm
2018-03-15 18:22:59 [INFO] >> InitFeature 0x02 0x02
2018-03-15 18:22:59 [INFO] Tablet init feature report: { 0x02, 0x02 }
2018-03-15 18:22:59 [INFO] >> Type WacomIntuos
2018-03-15 18:22:59 [INFO] Tablet type = 1
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> # Wacom CTL-660
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x00D5 0x000D 0x0001
2018-03-15 18:22:59 [INFO] Tablet is already defined!
2018-03-15 18:22:59 [INFO] / End of 'config\wacom.cfg'
2018-03-15 18:22:59 [INFO] >> CheckTablet
2018-03-15 18:22:59 [INFO] >> Include "config\user.cfg"
2018-03-15 18:22:59 [INFO] \ Reading 'config\user.cfg'
2018-03-15 18:22:59 [INFO] / End of 'config\user.cfg'
2018-03-15 18:22:59 [INFO] >> Log Off
2018-03-15 18:22:59 [INFO] Logging stopped!
2018-03-15 18:22:59 [INFO] >> LogDirect false
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x037A 0x000D 0x0001
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x037A 0xFF0D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x037A 0xFF0D 0x0001
2018-03-15 18:22:59 [INFO] >> Name "Wacom CTL-472"
2018-03-15 18:22:59 [INFO] >> ReportLength 10
2018-03-15 18:22:59 [INFO] >> ButtonMask 0x40
2018-03-15 18:22:59 [INFO] >> MaxX 15200
2018-03-15 18:22:59 [INFO] >> MaxY 9500
2018-03-15 18:22:59 [INFO] >> MaxPressure 2047
2018-03-15 18:22:59 [INFO] >> Width 152.000
2018-03-15 18:22:59 [INFO] >> Height 95.000
2018-03-15 18:22:59 [INFO] >> InitFeature 0x02 0x02
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> # Wacom CTL-480
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x030E 0x000D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x030E 0x000D 0x0001
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x030E 0xFF0D 0x0001
2018-03-15 18:22:59 [ERROR] Can't open HID tablet 0x056A 0x030E 0xFF0D 0x0001
2018-03-15 18:22:59 [INFO] >> Name "Wacom CTL-480"
2018-03-15 18:22:59 [INFO] >> ReportLength 10
2018-03-15 18:22:59 [INFO] >> ButtonMask 0x40
2018-03-15 18:22:59 [INFO] >> MaxX 15200
2018-03-15 18:22:59 [INFO] >> MaxY 9500
2018-03-15 18:22:59 [INFO] >> MaxPressure 1023
2018-03-15 18:22:59 [INFO] >> Width 152.000
2018-03-15 18:22:59 [INFO] >> Height 95.000
2018-03-15 18:22:59 [INFO] >> InitFeature 0x02 0x02
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> # Wacom CTL-490
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x033B 0x000D 0x0001
2018-03-15 18:22:59 [INFO] Tablet open!
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x033B 0xFF0D 0x0001
2018-03-15 18:22:59 [INFO] >> Name "Wacom CTL-490"
2018-03-15 18:22:59 [INFO] Tablet name = 'Wacom CTL-490'
2018-03-15 18:22:59 [INFO] >> ReportLength 10
2018-03-15 18:22:59 [INFO] Tablet report length = 10
2018-03-15 18:22:59 [INFO] >> ButtonMask 0x40
2018-03-15 18:22:59 [INFO] Tablet button mask = 40
2018-03-15 18:22:59 [INFO] >> MaxX 15200
2018-03-15 18:22:59 [INFO] Tablet max X = 15200
2018-03-15 18:22:59 [INFO] >> MaxY 9500
2018-03-15 18:22:59 [INFO] Tablet max Y = 9500
2018-03-15 18:22:59 [INFO] >> MaxPressure 2047
2018-03-15 18:22:59 [INFO] Tablet max pressure = 2047
2018-03-15 18:22:59 [INFO] >> Width 152.000
2018-03-15 18:22:59 [INFO] Tablet width = 152.00 mm
2018-03-15 18:22:59 [INFO] >> Height 95.000
2018-03-15 18:22:59 [INFO] Tablet height = 95.00 mm
2018-03-15 18:22:59 [INFO] >> InitFeature 0x02 0x02
2018-03-15 18:22:59 [INFO] Tablet init feature report: { 0x02, 0x02 }
2018-03-15 18:22:59 [INFO] >> Type WacomIntuos
2018-03-15 18:22:59 [INFO] Tablet type = 1
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> # Wacom CTL-660
2018-03-15 18:22:59 [INFO] >> #
2018-03-15 18:22:59 [INFO] >> Tablet 0x056A 0x00D5 0x000D 0x0001
2018-03-15 18:22:59 [INFO] Tablet is already defined!
2018-03-15 18:22:59 [INFO] / End of 'config\wacom.cfg'
2018-03-15 18:22:59 [INFO] >> CheckTablet
2018-03-15 18:22:59 [INFO] >> Include "config\user.cfg"
2018-03-15 18:22:59 [INFO] \ Reading 'config\user.cfg'
2018-03-15 18:22:59 [INFO] / End of 'config\user.cfg'
2018-03-15 18:22:59 [INFO] >> Log Off
2018-03-15 18:22:59 [INFO] Logging stopped!
2018-03-15 18:22:59 [INFO] >> LogDirect false
2018-03-15 18:22:59 [INFO] Log direct print = False
2018-03-15 18:22:59 [INFO] / End of 'config/init.cfg'
2018-03-15 18:22:59 [INFO] >> DesktopSize 2966 900
2018-03-15 18:22:59 [INFO] Desktop size = (2966.00 px x 900.00 px)
2018-03-15 18:22:59 [INFO] >> ScreenArea 2966 900 0 0
2018-03-15 18:22:59 [INFO] Screen area = (w=2966.00, h=900.00, x=0.00, y=0.00)
2018-03-15 18:22:59 [INFO] >> Area 75.12 40.46 79.49 34.3
2018-03-15 18:22:59 [INFO] Tablet area: (75.12 mm x 40.46 mm X+79.49 mm Y+34.30 mm)
2018-03-15 18:22:59 [INFO] >> Rotate 0
2018-03-15 18:22:59 [INFO] Rotation matrix = [1.000000,-0.000000,0.000000,1.000000]
2018-03-15 18:22:59 [INFO] >> Mode Absolute
2018-03-15 18:22:59 [INFO] Output Mode = Absolute
2018-03-15 18:22:59 [INFO] >> ButtonMap 1 2 3
2018-03-15 18:22:59 [INFO] Button Map = 1 2 3 0 0 0 0 0
2018-03-15 18:22:59 [INFO] >> Filter 0
2018-03-15 18:22:59 [INFO] Tablet filter = off
2018-03-15 18:22:59 [INFO] >> info
2018-03-15 18:22:59 [INFO]
2018-03-15 18:22:59 [INFO] Tablet: Wacom CTL-490
2018-03-15 18:22:59 [INFO] Width = 152.00 mm
2018-03-15 18:22:59 [INFO] Height = 95.00 mm
2018-03-15 18:22:59 [INFO] Max X = 15200
2018-03-15 18:22:59 [INFO] Max Y = 9500
2018-03-15 18:22:59 [INFO] Max Pressure = 2047
2018-03-15 18:22:59 [INFO] Click Pressure = 0
2018-03-15 18:22:59 [INFO] Report Id = 00
2018-03-15 18:22:59 [INFO] Report Length = 10
2018-03-15 18:22:59 [INFO] Button Mask = 0x40
2018-03-15 18:22:59 [INFO] Button Map = 1 2 3 0 0 0 0 0
2018-03-15 18:22:59 [INFO] Tablet init feature report: { 0x02, 0x02 }
2018-03-15 18:22:59 [INFO]
2018-03-15 18:22:59 [INFO] Area:
2018-03-15 18:22:59 [INFO] Desktop = 2966px x 900px
2018-03-15 18:22:59 [INFO] Screen Map = 2966px x 900px @ X+0px, Y+0px
2018-03-15 18:22:59 [INFO] Tablet = 75.12mm x 40.46mm @ Min(79.49mm, 34.30mm) Max(154.61mm, 74.76mm)
2018-03-15 18:22:59 [INFO] Rotation matrix = [1.000000,-0.000000,0.000000,1.000000]
2018-03-15 18:22:59 [INFO]
2018-03-15 18:22:59 [ERROR] Tablet init failed!
2018-03-15 18:22:59 [ERROR] Possible fixes:
2018-03-15 18:22:59 [ERROR] 1) Uninstall other tablet drivers.
2018-03-15 18:22:59 [ERROR] 2) Stop other tablet driver services.
Driver stopped. Restarting!
Windows Version:
Windows 10 Home Single Language Version 1703
Tablet Driver version:
0.0.14
Tablet model:
CTL490DW
Already tried both fixes given by the console.
^help please
Windows Version: 7 x64
Tablet Driver version: your driver 0.14
Tablet model: g430
I installed driver from main folder:
Then when I start TabletDriverGUI this happens:
I also tried driver from folder "driver_vmulti" - same issue
Tried to install https://www.xp-pen.com/upload/download/20180130/XP-PenWin(20180130).zip
but this driver doesn't work. It always says device not detected. Only one that worked for me was g430/star04 old driver.
Here is startuplog file: startuplog.txt
So, I've uninstalled my Wacom drivers. I've tried many things to see if it's fixed, like reinstalling and restarting my PC to see if it works, but nothing does. Idk if it matters but I'm using w7 and CTL-471 https://puu.sh/zGPHA/b088903394.png
Which is what Wacom drivers is actually do. I recently even use this to play Chicken Invaders....
So I have the driver installed and for the moment is seems to be working mostly properly, the only issue I've experienced is that I cannot click on anything either within osu or in other applications. I can however click and drag, either to scroll through the song list or to highlight text and stuff. My guess as to why this is happening is that the driver is counting all of my taps as drags, this was an issue to a smaller extent with the default Wacom driver, where I would have to keep my hand steady when clicking on things, especially outside of the game, with this one however no matter how much i try to steady my hand it still counts it as a drag. I have managed to very carefully, keeping the pen entirely vertical, gotten it to just click, which is another reason why I think this is the issue.
If this is just a setting for me to change than I will do that, I can also provide more information as needed, I can get around this situation by using the track pad on my laptop (all my usb ports are full playing osu so I cant plug in a mouse) so there is no big rush from me, its just a bit of a pain to switch between them.
Windows Version:
Windows 10
Tablet Driver version:
V0.0.14
Tablet model:
Intuos CTH-490
Was posted on Reddit but I saw I have to post errors here
I keep getting this error in the console of the GUI. I have Wacom ctl 471.
I have uninstalled old drivers already
-my error in console https://pastebin.com/APPbLEEp
-Edit: Tried using my xp pen g540 and it works but my wacom wont work
Windows Version: 10
Tablet Driver version: 0.0.14
Tablet model: Wacom ctl 471
Error api-ms-win-crt-runtime-l1-1-0.dll.
in the last days that I started the drivers they were fine, but today I get this error.
already try reinstalling the drivers but it still does not work help pls.
https://imgur.com/a/QcVIl
Windows Version: Windows 8.1
Tablet Driver version: 0.0.17
Tablet model: Wacom Ctl-480
I have two monitors at 1080p, trying to set full area of both desktops to full area of tablet with forced aspect ratio
Full desktop
option only maps the full tablet area to monitor 1DISPLAY 1
maps the full tablet area to the left half of monitor 1DISPLAY 2
maps the full tablet area to the right half of monitor 1My tablet is the G540 and it doesn't say it's supported, the driver identifies it as the G430, though changing settings in the driver doesn't seem to work.
I tried to get it working myself, VID seems to be 0x28BD and PID 0x0075 but I have no idea how to correctly implement them in the tablet.cfg
.
Would be awesome if it's possible to add support!
In the console it says: "Can't open HID tablet [usb ids]" and i really don't know what to do :(
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.