This is a fork of the ROS GSCam package that is used for broadcasting any GStreamer-based video stream via the standard ROS Camera API. This fork has been modified to allow for building a Docker image that can serve as a camera driver for the CARMA Platform.

This driver supports the following versions of GStreamer:

Assuming the CARMA Platform is installed at ~/carma_ws/src,

cd ~/carma_ws/src
git clone https://github.com/GoodarzMehr/gstreamer_camera_driver.git
cd gstreamer_camera_driver/docker
sudo ./build-image.sh -d

After the Docker image is successfully built, add the following lines to the appropriate docker-compose.yml file in the carma-config directory.

gstreamer-camera-driver:
  image: usdotfhwastoldev/carma-gstreamer-camera-driver:develop
  container_name: gstreamer-camera-driver
  network_mode: host
  volumes_from:
    - container:carma-config:ro
  environment:
    - ROS_IP=127.0.0.1
  volumes:
    - /opt/carma/logs:/opt/carma/logs
    - /opt/carma/.ros:/home/carma/.ros
    - /opt/carma/vehicle/calibration:/opt/carma/vehicle/calibration
  command: bash -c '. ./devel/setup.bash && export ROS_NAMESPACE=$${CARMA_INTR_NS} && wait-for-it.sh localhost:11311 -- roslaunch /opt/carma/vehicle/config/drivers.launch drivers:=gstreamer_camera'

Finally, add the following lines to the drivers.launch file in the same directory as docker-compose.yml.

<include if="$(arg gstreamer_camera)" file="$(find gscam_driver)/launch/left_imx390.launch">
</include>

left_imx390.launch is used as an example here and can be replaced with any other launch file in the gstreamer_camera_driver/launch directory.

This can be run as both a node and a nodelet.

• gscam

Publication frequencies are given for a Leopard Imaging LI-IMX390-GMSL2 camera operating at a resolution of 1920x1080 at 30 frames per second (fps).

• camera/image_raw [sensor_msgs/Image]: publishes the video stream obtained from the camera (30 Hz).
• camera/camera_info [sensor_msgs/CameraInfo]: publishes the camera calibration file (30 Hz).
• camera/driver_discovery [cav_msgs/DriverStatus]: publishes the CARMA DriverStatus message (1.25 Hz).

N/A

• set_camera_info [sensor_msgs/SetCameraInfo]: stores the given CameraInfo as the camera's calibration information.

• camera_name: the name of the camera (corrsponding to the camera info).
• camera_info_url: a url (file://path/to/file, package://pkg_name/path/to/file) to the camera calibration file.
• gscam_config: the GStreamer pipeline description.
• frame_id: the TF2 frame ID.
• reopen_on_eof: re-open the stream if it ends (EoF).
• sync_sink: synchronizes appsink (sometimes setting this to false can resolve problems with sub-par frame rates).
• preroll: preroll the stream if needed.
• use_gst_timestamp: use GstClock instead of ROS Time.
• publish_timestamp: publish the timestamp of image frames.

See the example launch files in the gstreamer_camera_driver/launch directory. Each launch file launches a Leopard Imaging LI-IMX390-GMSL2 camera connected via a TCP/IP connection.

This is a ROS package originally developed by the Brown Robotics Lab for broadcasting any GStreamer-based video stream via the standard ROS Camera API. This fork has several fixes incorporated into it to make it broadcast correct sensor_msgs/Image messages with proper frames and timestamps. It also allows for more ROS-like configuration and more control over the GStreamer interface.

Note that this pacakge can be built both in a rosbuild and catkin workspaces.

gscam supports the following versions of GStreamer

Install dependencies via rosdep.

• gstreamer1.0-tools
• libgstreamer1.0-dev
• libgstreamer-plugins-base1.0-dev
• libgstreamer-plugins-good1.0-dev

sudo add-apt-repository ppa:gstreamer-developers/ppa
sudo apt-get install gstreamer1.0-tools libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev libgstreamer-plugins-good1.0-dev

sudo apt-get install gstreamer1.0-tools libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev libgstreamer-plugins-good1.0-dev

• Use the CMake flag -DGSTREAMER_VERSION_1_x=On when building
• See the Video4Linux2 launchfile example for an example of the differences in the GStreamer config lines

• This has been tested with v4l2src

This can be run as both a node and a nodelet.

• gscam

• camera/image_raw
• camera/camera_info

• camera/set_camera_info

• ~camera_name: The name of the camera (corrsponding to the camera info)
• ~camera_info_url: A url (file://path/to/file, package://pkg_name/path/to/file) to the camera calibration file.
• ~gscam_config: The GStreamer configuration string.
• ~frame_id: The TF frame ID.
• ~reopen_on_eof: Re-open the stream if it ends (EOF).
• ~sync_sink: Synchronize the app sink (sometimes setting this to false can resolve problems with sub-par framerates).

The gscam c++ library can be used, but it is not guaranteed to be stable.

See example launchfiles and configs in the examples directory. Currently there are examples for:

• Video4Linux2: Standard video4linux-based cameras like USB webcams.
  • GST-1.0: Use the roslaunch argument GST10:=True for GStreamer 1.0 variant
• Nodelet: Run a V4L-based camera in a nodelet
• Video File: Any videofile readable by GStreamer
• DeckLink: BlackMagic DeckLink SDI capture cards (note: this requires the gst-plugins-bad plugins)