cobaltwolf / bluedog-design-bureau Goto Github PK

The Saturn V does not appear to be in the download!

Needs to align with the Gemini docking port to make things easier for MJ users.

USI-LS compatibility for all parts in the 0.10.5 release.

bluedog_Juno_UpperTank1 and bluedog_Juno_LowerTank2 are both titled "Chryslus-700 Liquid Fuel Tank"

Replace old Atlas V texture and rename the AtlasV3 sheet to the correct name, reexport all and compress to DDS.

Probe cores need some differentiation in terms of balance, to make them feel distinct. Each core should be looked at in regards to:
-Mass
-Cost
-EC units
-Other resource storage
-Experiments onboard
-SAS

Cores to be looked at:
-Pioneer 1
-Pioneer 4
-Asterix
-Diapason
-Ranger core
-Explorer 7 (Suomi)
-Venera/Pioneer (Pog)

Make sure their VAB descriptions are edited appropriately.

The plume on the service module appears misaligned. It's inside the craft.

Diamont solids and the kick motors can not be surface attached

Not sure why, it just can't be clicked. It needs to be fixed.

MOS parts need to have their placement in the tech tree balanced once they're done.

The pattern on the engine needs to be simplified to be a bit more believable, and the engine bell needs to be changed.

Additionally, the SRBs need to have darker nozzles or something.

Rorat probe core needs remotetech config

The chemtrails from your rockets are obviously some sort of biological agent that is causing users to believe in climate change that are being orchestrated by the lizard men that faked the moon landing! I DEMAND AN EXPLANATION AND FIX IMMEDIATELY OR I'LL CALL MY FLAT EARTH BROTHERS TO TAKE YOU DOWN!

Need to add KIS compatibility to make the Resupply parts for MOS worthwhile.

Parts that need it:

• Mercury capsule
• Agena Resupply Container
• Gemini Resupply Capsule
• TRAILS Gemini capsule?
• Transtage pressurized compartment
• MOS airlock module
• MOS warehouse module

Convert both sides of solar panel to static panels, add in transmitter, convert all animation over to ModuleAnimateGeneric.

Juno vernier engine attaches with a very visible gap.

Need to split into 3 RCS modules, and configure the effects to work correctly, as per Shadowmage's instructions.

This has not been paid attention to. Many parts likely have incorrect bulkhead profiles.

The filename case is incorrect in the bluedog_LOantenna model reference.

Agena needs to be rescaled to 0.9375m default.

The Saturn C-1 textures are currently unfinished. Right now the texture sheet still a has a fair bit of room on it and I'm not sure what to put on it.

The entire LR-87 and LR-91 are shiny, where it's only supposed to be the ribs on the engine bell along with a few other parts.

TRAILS has to be finished for this to happen. But TRAILS parts need to be integrated, modified, and possibly balanced.

there needs to be a readme on the github explaining the mod

The credits and changelog in the OP post need to get updated.

Since 1.1 Inon interstages get stuck when decoupling.

Need to make animated colliders work for the MOS-DM docking port, so that you can soft dock.

Will need to adjust the capture forces in the cfg once the soft-docking is working.

Make roll torque same as pitch and yaw torque. Mechjeb is oscillating on the roll axis.

Add 15 kg mass to probe account for experiments and antenna.

If the Sargents stay overfueled bring Isp down to Separatron levels. Target deltav is <1500.

The one with the hole in the middle. Decouples in wrong direction - flys off forward.

The entire craft comes apart when the main chute fully deploys. Need to determine if this is pilot error or a config issue.

Marquart got rescaled to 0.3125m. @VenomousRequiem the RP config needs a quick fix, as well as the Tweakscale config.

Need to figure out a solution for pods with integrated heatshields. Either:

1. Separate them
2. Tweak their heating values to make sure they reenter properly and safely.

Interstages need to be fixed, seen Jso's post for info.
http://forum.kerbalspaceprogram.com/index.php?/topic/122020-wip-105-bluedog-design-bureau-v009a-prometheus-3112016/&page=50#comment-2396838

Juno structural adapters don't perfectly match sizes at their ends.

Suggestion. An inline fuel cell for Agena.

Parts need 1.1 tags so that people can find them.

A lot of the Saturn parts aren't properly tagged. Just putting this here so I'll remember, I'll handle this myself.

Apparently the Diamant vernier fin is not compatible with FAR, as evidenced by the inability to tweak it's strength vs weight as you are supposed for be able to. The other aero parts need to be tested as well.

Centaur long tank mass should be 0.6875, not 0.45

Need to find all the textures that got replaced with TGAs during the dev cycle, and recompress them.

Right now the textures are sort of awful. I'd like to take another pass at them.

I do not know if this is intentional, but you can only run the BDB IR-Spectrometer experiment once (Like the Mystery Goo)