bhclowers / os-ims Goto Github PK
View Code? Open in Web Editor NEWOpen Source Ion Mobility Spectrometer
Open Source Ion Mobility Spectrometer
Can I use the same Teflon hose--used in draft gas inlet, for gaseous inlet or should I use 01 ID/0.062 OD PEEK capillary mention in the paper?
I finished the assembly of OS-IMS,
This is my final assembly, I have few questions before I start testing the device.
1) I used a conductor needle (200 micron) for sample injection, is it fine or should I used non-conductor material like PEEK capillary, the one you used in your paper?
2) I put three shatter grid between drift and desolvation region. And the last electrode of both drift and desolvation region is connected to the first and third grid respectively. I put insulator between first and second grid and second and third grid. Is this configuration correct or should I make some changes?
3) Should I use floating power source, by floating I mean should I use just positive terminal of the HV power source?
If I need to connect the negative terminal of the HV source, which point should I attach the negative terminal?
In the paper, in section 6, corona needle placement is described briefly. I paste that portion of paper below:
_**For the measurement of the corona-ionizationspectrum (Fig. 17(a)), a home built corona needle was placed centric and in close proximity to the first ring of the desolvationregion and connected to an electric potential of 14.5 kV. Then, sampled headspace from 2,4-lutidine was applied via a PEEK capillary which is connected to a gas tight syringe containing the sample. The capillary sample inlet is shown inFig. 16. Theassembly is similar to the assembly of the drift gas inlet described above, while using a 0.01 ID/0.062 OD PEEK capillaryinstead of the Teflon hose. Due to the smaller diameter of the capillary compared to the Teflon hose, only one (middle) ofthe three spacers used has a cut out. It should be noted that a range of gas-phase sample introduction mechanisms maybe implemented
(PDF) Implementation of a Flexible, Open-Source Platform for Ion Mobility Spectrometry. Available from: https://www.researchgate.net/publication/325255050_Implementation_of_a_Flexible_Open-Source_Platform_for_Ion_Mobility_Spectrometry [accessed Mar 08 2021].**_
Should I attach the corona needle into SMA connector or should I palace it at a distance?
What kind of power supply will work good for IMS?
Power supply source should be DC or can I use circuit made from flyback transformers (relatively cheap option). I noticed that circuit with flyback transformer add noise at higher voltage?
The first ring of the desolvation region should be connected to an electric potential of 11.5 kV via a high voltage power supply. and corona needle needs a power supply with almost same potential.
Can I use same power supply or should I use separate power source?
In the paper you mentioned that drift tube is terminated with aperture grid,
following lines are from your paper.
_To shield the detector from an image current induced from the approaching ion cloud, the drift tube is terminated with an aperture grid which is directly placed on the last electrode, followed by 1 spacer and finally the detector. The aperture grid is connected via a 500 k resistor to ground, as shown in Fig. 12. To stabilize the voltage on the aperture grid, it is advantageous to add an additional capacitor (we used 0.22mF) in parallel to the resistor.
I have few questions;
Hello,
I am getting this error (Line 9, column 122: This is not an eagle file) while opening eagle files, almost the same thing happens for all .brd files. May you please let me know how I can figure out this problem?
Many thanks
I want to test the opening and closing performance of the tristate ion shutter. When testing the opening or closing time of the shutter, should the opening and closing time be at the ms level?
There is no BOM for I2V_Rev4.brd PCB.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.