This repository contains all our developments for the Software II group project. We explore the idea of an automatic 3D-scanned object database creator:

A person will place an object (i.e. stick) on the robots workspace and this will scan it, this then will be post processed and sent to rhino/grasshopper to add it to a database, this denoised data will parallely be sent to another ros node that will extract all possible grasping points and choose the most suitable one to put the object aside so that the person can place a new element to scan.

So far, the developments regarding the scanning and Grasshopper - ROS communication have been succesfully completed. However, we plan on keeping exploring and developing the following:

• Scaning and Filtering (using reconstruction and open3d)
• ROS - Grasshopper communication
• PointCloud subscriber GH
• Trying different scanning approaches - photogrammetry, gaussian splatting…
• Digital vs. Physical (analyze results accuracy)
• Mesh database creation in grasshopper
• Automating scanning toolpath - bounding box strategy
• Extract grasping poses from object

Fot this example, we will be using an UR10e and a Azure Kinetic camera:

In a new terminal, install v4l-utils:

sudo apt install v4l-utils

Download this file and go to Downloads directory in the terminal. Once there, enter:

mv 99-k4a.rules /etc/udev/rules.d/

Restart the computer.

Follow the steps in here and here to properly install Docker.

Clone this repository and go to its directory in the terminal. Then:

.docker/build_image.sh

Now, if you don't have a Nvidia driver, run this command to create a container:

.docker/run_user.sh

If you have a Nvidia driver follow the instructions here to install the NVIDIA Container Toolkit and then run:

.docker/run_user_nvidia.sh

Once inside the container, ake ownership of the workspace with:

sudo chown -R $USER /dev_ws

Open vscode, go to the docker tab. Select the running container, right click and select attach vscode.

Important note: STOP and START the container from vscode. If you do .docker/run_user.sh again, you will create a new container, and you will loose all the progress. So, make sure that you start and stop the same container always.

To install COMPAS FAB, follow the intructions in gh_ros repository.

Launch the ur10e commander file:

roslaunch commander ur10e_ka_commander.launch

Go to file custom_pkg/notebooks/commander_ak_examples.ipynb and run the code snippets to see how MoveIt works. This file also generates the joint_positions.yaml file, which is then used to run the reconstruction_node.

Set:

• Robot IP: 192.168.56.101
• Your laptop IP: 192.168.56.1

Launch the robot bringup, this file sets the robot IP and loads the kinematics calibration for the IAAC UR10e.

 roslaunch commander ur10e_ka_commander.launch sim:=false

If you want to use the gripper instead, replace ka by gripper.

Launch the Azure Kinect industrial reconstruction node by entering:

 roslaunch capture_manager reconstruction.launch

Edit the rosbridge_websocket.launch file inside the custom_pkg, and change the address argument to your IP address (i.e. 172.16.21.74). After setting it up, launch it:

 roslaunch custom_pkg rosbridge_websocket.launch

Finally, launch the launch file that executes all the scanning and filtering nodes. Change the .ply file name by editing the file_path (raw pointcloud) and save_path (filteres pointcloud) arguments in the launch file (pcl_capture.launch).

 roslaunch custom_pkg pcl_capture.launch

You can find a couple of our .ply files inside the custom_pkg/captures folder. Enjoy!