yunghuihsu / capture-rtsp-latency-demo-with-tshark Goto Github PK

RTP and RTCP packets

source: 2015。A time delay based efficient approach for the synchronization of the audio and video streams-RTP and RTCP packets

capture_rtsp.sh is a Bash script for capturing RTSP packets. The script offers functionality to retrieve and validate RTSP URIs from command line arguments, as well as to manage logs and captured data.

• 2023.06。How to Install and Use Wireshark in Ubuntu 22.04

sudo apt update
sudo apt install wireshark -y

Add your local user to wireshark group using usermod command

sudo usermod -aG wireshark $USER
newgrp wireshark
sudo reboot

If the installation is successful, try GUI mode

wireshark

or commad mode

tshark

1. Grant execution permissions to the script:

   chmod +x capture_rtsp.sh

2. Run the script and provide RTSP URIs as parameters:

   ./capture_rtsp.sh rtsp://example1.com:8554/stream rtsp://example2.com:8554/stream

When using tshark for extended periods or with a substantial amount of data, you might encounter Out of Memory (OOM) issues. This happens because tshark stores captured data in RAM, and if RAM gets exhausted, the system might kill some processes to free up memory, potentially including the tshark process. To avoid this, it's recommended to periodically check the memory buffer size (using top), or consider increasing the system's RAM.

1. Input Validation: The script retrieves RTSP URIs from command line arguments and checks whether their format is correct.
2. Log Management: It manages log files under the /tmp/ directory and offers a backup function for logs.
3. Data Capturing: Utilizes the tshark command to capture RTSP packets.
4. Cleanup and Exit: When the script is interrupted, it terminates all initiated RTSP source processes.
5. Periodic CSV File Management: Manages the size of the CSV file based on the number of provided RTSP URIs.

This is a script that captures packets using the RTSP protocol by invoking the 'tshark' command-line tool.

stdbuf --output=L tshark  -z rtsp,state -Y 'rtcp.pt==200 || (rtp.p_type==96 && rtp.marker==1)'  
-T fields  -E header=y -E separator=,   -E occurrence=f 
 -e rtcp.senderssrc -e rtcp.timestamp.ntp.msw -e rtcp.timestamp.ntp.lsw -e rtcp.timestamp.rtp -e frame.time_epoch -e rtp.ssrc -e udp.port  -e rtp.timestamp -e rtp.marker  2>errlog1 1> $DIR_LOG/rtsp_capture_$TIMESTAMP.csv

1. stdbuf --output=L.

   • stdbuf is a command to adjust the stdio buffer for programs running in the pipeline.
   • --output=L causes the output to use a line buffer, which means that the output will be flushed immediately after each line instead of accumulating to a certain size and then being flushed.

2. tshark.

   • This is the command-line version of Wireshark, used to capture and analyze network traffic.

3. -z rtsp,state.

   • -z is used to specify a statistics module.
   • rtsp,state is used to collect status information about RTSP streams.

4. -Y 'rtcp.pt==200 || (rtp.p_type==96 && rtp.marker==1)': -Y Used to specify a statistics module.

   • -Y is used to specify the display filter, which is used to select dataz packets with specific conditions.
   • This filter is used to select data packets with specific criteria. The filtering criteria here is to select RTCP packets of type 200 or RTP packets of type 96 with a mark of 1. 5. -T fields: -Y is used to specify the display filter.

5. -T fields.

   • -T Specifies the output format.
   • fields Specifies that the output is in field format, rather than the default detailed package description.

6. -E header=y -E separator=, -E occurrence=f.

   • -E is used to define various options for field output.
     • header=y Include the field name as a header in the output.
     • separator=, Specifies that the separator between fields is a comma.
     • occurrence=f Specifies that if a field occurs more than once in the same packet, only the first occurrence of the value is output.

7. -e rtcp.senderssrc -e rtcp.timestamp.ntp.msw -e ...

   • -e is used to specify the fields to be output.
   • Each -e is followed by the name of the field to be output.
   • Fields used to log RTCP packets, including: rtcp.senderssrc rtcp.timestamp.ntp.msw rtcp.timestamp.ntp.lsw rtcp.timestamp.rtp
   • Fields used to log RTCP packets, including rtp.ssrc udp.port rtp.timestamp rtp.marker

8. 2>errlog1.

   • Redirect standard errors to a file named errlog1.

9. 1> $DIR_LOG/rtsp_capture_$TIMESTAMP.csv: Redirects standard output to a file named errlog1.

   • Redirect standard output to the specified csv file, where $DIR_LOG and $TIMESTAMP are variables that are replaced with their actual values.

1. Grab the complete packet and write it to a tmp*.pcap file and manage it by rotate.

   First, launch the tshark utility to monitor and then launch gstreamer to receive RTSP streams in order for tshark to capture information about the RTSP protocol creation process.

   tshark -w tmp.pcap -b filesize:10000 -b files:5 -f "host <target ip>"
   

   • -b filesize:10000

     • It sets the maximum file size (in kilobytes) for the capture file(s) to 10,000 KB (or 10 MB). When this size is reached, tshark will close the current file and open a new one. This is useful for managing large captures.

   • -b files:5

     • This sets the maximum number of files that will be kept before tshark starts overwriting them. In this case, 5 files will be kept. When a sixth file is created (because the filesize limit has been reached five times), the oldest file will be overwritten.

   Combining -b filesize:10000 and -b files:5 means tshark will capture packets, writing them to files up to 10 MB each, and it will keep a maximum of 5 files. Once these limits are reached, old data will be overwritten in a rotating manner.

   • -f "host <target ip>"
     • This filter instructs tshark to only capture packets where the source or destination IP address is . Replace with the actual IP address you're interested in. This is useful for reducing the amount of captured data to only what's relevant.

2. Enable the gtsreamer command to receive the packets.

   • Please install the gstreamer first

   gst-launch-1.0 rtspsrc location=<YOUR RTSP URL>  !  fakesink
   # eg:
   # gst-launch-1.0 rtspsrc location= <RTSP URL e.g. rtsp://192.168.1.100:85544/stream1> ! fakesink
   
   

3. Use the following command to read tmp*.pcap.

   latest_file=$(ls -t |grep pcap| head -n 1) 
   tshark -r ${latest_file} -z rtsp,state \
       -Y 'rtcp.pt==200 || (rtp.p_type==96 && rtp.marker==1)' \
       -T fields  -E header=y -E separator=,   -E occurrence=f \
       -e frame.time_epoch -e rtcp.senderssrc -e rtcp.timestamp.ntp.msw -e rtcp.timestamp.ntp.lsw -e rtcp.timestamp.rtp  -e rtp.ssrc -e udp.port  -e rtp.timestamp -e rtp.marker
   

See explore_rtsp_capture.ipynb

• www.wireshark.org/docs/man-pages/tshark
• 2023.06。How to Install and Use Wireshark in Ubuntu 22.04
• 2021。Shanto Roy。How to Convert PCAP files to CSV for Network Traffic Analysis

• 2020。wiki.wireshark.org/KnownBugs/OutOfMemory
• 2014。To Infinity and Beyond! Capturing Forever with Tshark