NanoMig is a port of the Minimig to the Tang Nano 20k.

This is based on the MiSTeryNano project and also relies on a M0S Dock being connected to the Tang Nano 20k.

This is currently a very early work in progress and only a few games seems to run properly.

Current state:

• Minimig based on Minimig_ECS
• Kick ROM stored in flash ROM
• Up to 2MB chip and 1.5MB slow RAM
• Up to four virtual floppy drives
• HDMI video and audio, PAL and NTSC
• Keyboard, Mouse and Joystick via USB

These youtube shorts mainly document the progress:

• NanoMig #1: Amiga DiagROM booting on Tang Nano 20k
• NanoMig #2: USB keyboard and audio for the FPGA Amiga
• NanoMig #3: Booting workbench for the first time on Tang Nano 20k
• NanoMig #4: Running Amiga Pro tracker on the Tang Nano 20k

The necessary binaries can be found in the project releases.

• nanomig.fs needs to be flashed to the FPGA's flash memory
• Kickstart 1.3 kick13.rom needs to be flashed at offset 0x400000 and 0x440000
• The latest firmware needs to be flashed to the M0S Dock
• A default ADF disk images named df0.adf should be placed on SD card (e.g. workbench 1.3)