Linphone for iPhone depends on liblinphone SDK. This SDK is generated from makefiles and shell scripts. Before building Linphone on iPhone, please read and execute liblinphone README.
You will NOT be able to build the SDK if you did not read liblinphone README first!
-
Using HomeBrew:
brew install imagemagick yasm nasm
-
Using MacPorts:
sudo port install ImageMagick optipng yasm nasm
- For this part, we assume that
LOCAL_BIN_DIR
is set as following depending on which tool you use:
For MacPorts: LOCAL_BIN_DIR=/opt/local/bin
For HomeBrew: LOCAL_BIN_DIR=/usr/local/bin
-
Modify your
PATH
so that the tools are taken in place of the versions brought by Apple in/usr/bin
. Otherwise the build will fail with obscure errors:export PATH=$LOCAL_BIN_DIR:$PATH
-
Install gas-preprosessor.pl (version above July 2013) into your
LOCAL_BIN_DIR
directorywget --no-check-certificate https://raw.github.com/yuvi/gas-preprocessor/master/gas-preprocessor.pl chmod +x gas-preprocessor.pl sudo mv gas-preprocessor.pl $LOCAL_BIN_DIR
-
Link
libtoolize
toglibtoolize
sudo ln -s $LOCAL_BIN_DIR/glibtoolize $LOCAL_BIN_DIR/libtoolize
-
Link host's
strings
to simulator SDKsudo ln -s /usr/bin/strings /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/strings
- GPL third parties versus non GPL third parties
This SDK can be generated in 2 flavors. First is with GPL third parties, it means liblinphone includes GPL third parties like FFMPEG or X264. If you choose this flavor, your final application must comply with GPL in any case. This is the default mode.
To generate the liblinphone multi arch sdk in GPL mode, do:
cd submodules/build && make all
ALTERNATIVELY, you can force liblinphone to use only non GPL code except for liblinphone, mediastreamer2, oRTP, belle-sip. If you choose this flavor, your final application is still subject to GPL except if you have a commercial license for liblinphone, mediastreamer2, oRTP, belle-sip.
To generate the liblinphone multi arch sdk in non GPL mode, do:
cd submodules/build && make all enable_gpl_third_parties=no
-
For Xcode prior to 4.5, use:
make -f Makefile.xcode4.4
-
ZRTP support
You can disable ZRTP support with:
make all enable_zrtp=no
-
In case you upgrade your IOS SDK, you may force rebuilding everything, by doing
make veryclean && make all
The resulting sdk is in liblinphone-sdk/
root directory.
After the SDK is built, just open the Linphone Xcode project with Xcode, and press Run
.
- Note regarding third party components subject to license:
The liblinphone-sdk is compiled with third parties code that are subject to patent license, specially: AMR, SILK G729 and H264 codecs. Linphone controls the embedding of these codecs thanks to the preprocessor macros HAVE_SILK, HAVE_AMR, HAVE_G729 HAVE_OPENH264 positioned in Xcode project. Before embedding these 4 codecs in the final application, make sure to have the right to do so.
You need the cocoapods gem installed:
sudo gem install cocoapods
pod setup # the first time that cocoapods is installed, not needed if you have it already
pod init
This will install the KIF framework, which is used for testing:
pod install
After this, you should open the xcworkspace instead of the xcodeproj
open linphone.xcworkspace
Now, simply press Command + U
and the default simulator will launch and try to pass all the tests.
-
Video capture does not work in simulator (not implemented by simulator?).
-
Link errors with x86_64: this happens when you try to run linphone on the iPhone 5S/6/6+ simulators. This is due to the fact that we're not building the SDK for the x86_64 architecture, due to it being redundant with i386 (and increasing dramatically the compile time and build size). The solution (temporary) is to force the acceptable architectures to be 'armv7' only (remove 'arm64') and disable the "build active architecture" flag in the linphone, XMLRPC and NinePatch projects. Don't forget to re-enable them when archiving your project.
Sometime it can be useful to step into liblinphone SDK functions. To allow Xcode to enable breakpoint within liblinphone, SDK must be built with debug symbols.
To add debug symbol to liblinphone SDK, add make option enable_debug=yes
:
make all enable_gpl_third_parties=no enable_debug=yes
For iOS specific media development like audio video capture/playback it may be interesting to use mediastream
test tool.
The project submodule/liblinphone.xcodeproj
can be used for this purpose.