xchwarze / ar150-wifipineapple Goto Github PK
View Code? Open in Web Editor NEWConverting your AR150 to a Wifi Pineapple NANO
Converting your AR150 to a Wifi Pineapple NANO
Hello, can you tell my how to patch the pineapd on 2.7.0 version? I wanna create the automate build bash
First of all thx for your great work. I guess i have done somthing wrong. Maybe wrong setting. Flashing over Uboot with no problem. I have a RTL8192CU usb wifi for second wifi. It is visible as wmon1. Till now i did not use Usb for second storage. I have tryed all of your builts with same problem. When i try to start Recon the Pineapd shows a bargraph running. But when its finished it shows that there are no logs, and that i should run Recon first. Somtimes when i try to give Recon a second try Pineapd didn,t start. When i try to aktivate Pineapd over menue "Pineap" most times it did not change its status. Sometimes it changes from off to on, but just for a few seconds. What have i done wrong?
I can't connect 172.16.42.1 port 22..
Did you block it?
hello,2.6.2 Using ar9721usb network card,“Open AP SSID” SSID can be searched, but cannot be connected.
Awesome work. Been using the 2.7.0 build you did. I have a AR300M, I found a version of 2.0.2. And I've been trying to compile my own version of 2.7.0 for the AR300M. Been able to extract the files with binwalk but no experience with openwrt firmwares and keep getting met with errors. Any chance of a version compiled for the AR300M. With the 2.0.2 version it just seems abit snappier than on the ar150
can't start PineAP
can't start scan in Recon
shows error Status: Monitor interface won't start! Try to run manually airmon-ng start wlan1
Hi! It’s not an issue it’s just a small question. I have lack of memory on gl-ar to install new modules. I just wanted to get to know how to install usb stick?
Thanks in advance your Dog.
I haven't been able to get the time zone to stick, it reverts. Everything else seems fine, install was smooth.
Thanks for all you do, xchwarze!
I am thinking of getting a new ar150 since I broke mine, were you able to still use this for building it?
hi there, ive encountered an issue where the pineapple doesn't want to do internet sharing on my kali linux box and all it shows as detecting and on rare occations if it detects it says "invalid argument" and just shows the screen to the web gui. please help. and im a beginner Youtuber named 'unkn0wn" and i have tried this before but with a 50% success rate i want to get a 100% success rate and do a video on my channel on this. www.youtube.com/c/blankdot1 . And i want to make this a big project. i want to work with you and dev on some ideas and bring it to life. please contact me via email [email protected] so i can express further on the ideas i have and what we can do. please can you contact me and help me with this issue :) thanks!
i cant seem to find out how to share internet to the pineapple even if i use the scripts found here: https://khasmek.github.io/howto/2016/09/27/ar150-pineapple-install
can anyone help me?
Thanks for sharing this build!
Awesome Job!
After flashing firmware I accessed the initial web GUI page and appears the login form even without making the initial setup. Is there a default password or is there a way to force the initial setup?
Regards
Sorry for my english
Can you help me?
Good morning, I could do a 16mb Ci eprom backup to get my gl-ar150 back
This is not an issue. First, thank you for maintaining this and keeping us all up-to-date. I have tried to follow a few other guides online to build my own. However quite a few of the links available are out of date, or point to gits/ firmware builders that are no longer maintained. I am interested in trying this project on a gl-inet AR750
GL-AR750
Powered by Qualcomm QCA9531 SoC,650MHz CPU
300Mbps(2.4G) + 433Mbps(5G) high speed
DDR2 128MB RAM
Support external storage up to 128GB
16MB Nor flash
Small, light, easy to use
OpenWrt/LEDE pre-installed
This Same CPU was used in the GL-AR300, which has already proven to run the PineAP firmware.
I have followed instructions for extracting the firmware for the Tetra 2.6.2 using binwalk, However, I'm not sure if cloning the current openwrt 19.07 git and continuing with the instructions I've found is the best step or not, the instructions i'm following are dated, and suggest cloning https://github.com/domino-team/openwrt-cc, which is openwrt 15.05. this doesn't seem to be a step in the right direction. Any help you can provide would be greatly appreciated, It could be pretty cool to have a low cost Tetra for development as well 👍
Hello, I am planning to make a nice guide on how to do this in the coming weeks and I have some questions.
I plan to make a website with screenshots and a good step by step list of instructions linking to this repo.
Before doing that I have some questions:
Is there an existing guide out there?
Is this the best / most up to date repo for the AR150?
Are there any notable disadvantages to using an AR150 vs the Hak5 product?
What is the difference between?
... I also plan to compare it with a Pumpkin Pi (raspberry pi alternative)
Thanks!
Hello. I'm using this firmware gl-ar150-nano-2.6.2-private.bin in my ar150 but I can't connect to ssh and I can't install dependencies to sslplit module. I have flashed the firmware a few times but It doesn't work. Anyone has any idea how can I solve this? Thank you all
I just got an GL-AR150 router and flashed the 2.0.7 optimized firmware using the original web GUI of the router, on the upgrade firmware section.
Then, I rebooted the AR150 and it proprely showed up as "Pineapple_94B0", I can also connect myself.
But when i try to see the web GUI, nothing happend.
I tried to connect using the regular IP of the supposed web interface: http://172.16.42.1:1471/
I first thought that the IP address had not been set correctly so i tried to use the router ip wich were: http://169.254.121.246/
but nothing as well.
Is it a common issue, or maybe i did something wrong ?
Hello, sorry for opening an issue, but I hope this will make us communicate.
Since months I'm looking for a way to build an up to date firmware for the GL-AR300M.
A you stated, the last known version of pineapple fw is 2.4.2, and I can't even say if it works or not.
Your repo here looks very promising!
Could you teach me how to port the latest version of pineapple firmware to the AR300M?
I think you're my only chance. The community is quite chaotic about these ports. Yours looks like the most systematic I encountered, but I have a different model to work with.
I congratulate for your excellent up to date work, and hope to learn how to replicate this excellence on another model.
question is in the title. from what i can tell the only difference is the external antenna at the back.
thanks :)
Thank you for this ar150 build, i hope you made for mr3040
Hello! Could you explain how you circumvented the version checking? this blog talks about it a bit, but I'm a bit curious. http://gerryk.com/posts/using_ghidra_to_reverse_wifi_pineapple_protection/
delete this
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.