wh201906 / proxmark3gui Goto Github PK

感觉是缺少依赖库，不过缺少的是什么呢

ic卡读取 什么也没有返回，id卡正常，请问这个是什么原因呢？

在图形化界面打开报错如下：

打开client下的procmark3.exe报错如下：一共三个

pm3.bat --list
[=] Session log D:\V0.2.8-win64-rrg_other-v4.16717\client/.proxmark3/logs/log_20240129.txt
[=] Using UART port COM3
unknown command:: 0x61334d50[!!] ERROR: cannot communicate with the Proxmark

rrg/iceman 4.13441 点击连接10次，命令中会显示1次版本hw version，GUI界面一直显示未连接，无反应，按钮灰色

Pm3 log 显示 STDIN unexpected end, exit....

换成老版本rrg/iceman 4.9237，点击连接2次，命令中会显示hw version一次， GUI界面一直未连接，按钮一直灰色，无反应，问题依然存在

Pm3 log 显示 STDIN unexpected end, exit....

Issue:

Using the iceman proxmark3 fork (https://github.com/RfidResearchGroup/proxmark3) results in the following error.

[=] Session log /home/setime/.proxmark3/logs/log_20231029063100.txt
[+] loaded from JSON file `/home/setime/.proxmark3/preferences.json`
[=] Using UART port /dev/ttyACM0
Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway.

Logfile:

[+] loaded from JSON file `/home/setime/.proxmark3/preferences.json`
[=] Using UART port /dev/ttyACM0
[=] Communicating with PM3 over USB-CDC
[!!] STDIN unexpected end, exit...

Working the Iceman installation via the terminal works without any issues. Termial logs:

> /home/setime/repos/proxmark3_iceman/pm3 -p /dev/ttyACM0
[=] Session log /home/setime/.proxmark3/logs/log_20231029061950.txt
[+] loaded from JSON file `/home/setime/.proxmark3/preferences.json`
[=] Using UART port /dev/ttyACM0
[=] Communicating with PM3 over USB-CDC


  8888888b.  888b     d888  .d8888b.   
  888   Y88b 8888b   d8888 d88P  Y88b  
  888    888 88888b.d88888      .d88P  
  888   d88P 888Y88888P888     8888"  
  8888888P"  888 Y888P 888      "Y8b.  
  888        888  Y8P  888 888    888  
  888        888   "   888 Y88b  d88P 
  888        888       888  "Y8888P"    [ ☕ ]


Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway.
  [ Proxmark3 RFID instrument ]

    MCU....... AT91SAM7S512 Rev A
    Memory.... 512 KB ( 61% used )

    Client.... Iceman/master/v4.17140-208-g9fd539723 2023-10-28 21:24:05
    Bootrom... Iceman/master/v4.17140-208-g9fd539723-suspect 2023-10-28 21:23:45 
    OS........ Iceman/master/v4.17140-208-g9fd539723-suspect 2023-10-28 21:24:01 
    Target.... PM3 GENERIC


[usb] pm3 -> 

The output from the GUI does seem to stop after the wayland error.

Analysis:
I was unable to find the issue. It seems that the QProcess input somhow screws things up.

是冰人固件本来就连接不了蓝牙，还是没完善好？

业界良心Proxmark3GUI，鼎力支持。
踊跃提交bug

proxmark3

This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.

疑似环境变量遗失

已解决，路径中不能含有空格或中文字符

ProxMark3 Easy 512k AT91SAM7S512 Rev A
Client.... Iceman/master/v4.15864-144-ge049a7c5a
Bootrom... Iceman/master/v4.15864-144-ge049a7c5a
OS........ Iceman/master/v4.15864-144-ge049a7c5a
Target.... PM3 GENERIC

I can get a quick connection to the client with the GUI, but then this occurs

PM3 Error: QProcess::Crashed "Process crashed"

Is it possible I'm not passing the proper config_json? Is there an issue using the internal drop downs vs trying to pass a path myself?

Hi, I managed to correctly build the client and link the port and the actual CLI client that I use to connect to my Proxmark 3 X (https://shop.mtoolstec.com/product/proxmark3-x), but after I hit "Connect" with the correct port selected it initializes the connection but then instantly disconnects.
Here is what happens on the terminal:
$ ./Proxmark3GUI QMetaObject::connectSlotsByName: No matching signal for on_Raw_keyPressed(QObject*,QEvent&) QMetaObject::connectSlotsByName: No matching signal for on_MF_keyWidget_resized(QObject*,QEvent&) QMetaObject::connectSlotsByName: No matching signal for on_portSearchTimer_timeout() QMetaObject::connectSlotsByName: No matching signal for on_GroupBox_clicked(bool) QMetaObject::connectSlotsByName: No matching signal for on_stopButton_clicked() dock count 5 dock name "Mifare" dock name "LF" dock name "T55xx" dock name "RawCommand" dock name "Settings" Main: QThread(0x55aa5db463c0) "/home/daniel/Proxmark3GUI/build" "/home/daniel/Proxmark3GUI/build" "/home/daniel/Proxmark3GUI/build" config file: ":/config/config_official.json" QThread(0x55aa5df0d530) PM3 Error: QProcess::Crashed "Process crashed"

Debian 成功make后，报无法找到config.json,发现目录下无此文件，将config_offical.json改为config.json，不再报无法找到config.json，点击连接，显示已连接，一秒后自动断开，显示未连接。

但是图形化软件没有支持一些新命令，比如auto、hf mf autopwn
命令列表在这里https://github.com/RfidResearchGroup/proxmark3/blob/master/doc/commands.md

Hello,
Nice work ... no ... great work !!
But, I have a minor issues.
The "clear" data button from "File" section is not working. (it works fine for keys).
The "load" data button doesn't update the Data list display.
v0.2.4 Compiled for ARM
Thank you !

This is the message I get after copy and pasting the build code. Is there something I need downloaded before doing this? I already set up my Prox and its working fine with the Iceman build. I just wanted to try this out.

Message:
Package qt5-default is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'qt5-default' has no installation candidate
Cloning into 'Proxmark3GUI'...
remote: Enumerating objects: 517, done.
remote: Counting objects: 100% (517/517), done.
remote: Compressing objects: 100% (498/498), done.
remote: Total 517 (delta 22), reused 468 (delta 13), pack-reused 0
Receiving objects: 100% (517/517), 3.59 MiB | 1.45 MiB/s, done.
Resolving deltas: 100% (22/22), done.
Info: creating stash file /home/kali/Proxmark3GUI/build/.qmake.stash
Project ERROR: Unknown module(s) in QT: serialport
make: *** No targets specified and no makefile found. Stop.
zsh: no such file or directory: ./Proxmark3GUI

/module/lf.cpp line 87 QT::SkipEmptyParts

Make Error : SkipEmptyParts is not a member of QT

Change to QString::SkipEmptyParts

Make success

May QT5 not support QT::SkipEmptyParts

我发现**国内一些gui已经支持gtu卡，是否考虑添加支持？

LF search uses "u" instead of "-u"

Latest RRG/Iceman release is v4.13441
https://github.com/RfidResearchGroup/proxmark3/releases/tag/v4.13441

如果在mac下怎么搞呢

能否支持最新版rrg客户端v4.15864
Can it support the latest version of rrg client v4.15864

I use the GUI with the command line client that comes with the iCopy XS to connect, and I get the following error.

我用 GUI 再搭配 iCopy XS 自带的命令行客户端去连接，会出现下面的错误。

[+] loaded from JSON file D:/CLIENT_X86/.proxmark3/preferences.json
[=] Using UART port COM13

[=] Communicating with PM3 over USB-CDC

qt.qpa.plugin: Could not load the Qt platform plugin "windows" in "" even though it was found.
This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.

Available platform plugins are: windows.

为什么连上了，进行Darkside攻击后密码区没有显示密码，输入命令获得全部密码后密码区域仍然没有显示密码呀？

Hi, I need some help if possible. I am faced with a problem that I cannot overcome.
In terminal mode, I connect safely with "pm3". while with Proxmark3GUI, I get a "Failed to connect to the hardware" error.
I double checked the path and serial port ttyACM0 and both are correct.
What could this error be caused by?
My proxmark3 is the 256kb version, compiled without LF, STANDALONE and FELICA.

最近发现你用C++写的这个pm3gui 需要刷入冰人的固件才能使用吗

当前版本保存的时候只能保存为 txt 文件，无法选择保存为dump文件.

First I had to work around the incorrect CLI syntax for the client:
-p /dev/<port> -f

It looks like it starts but then I don't see the reason for the failure in the captured log:

[=] Session log /home/gbin/.proxmark3/logs/log_20220513.txt
[=] Output will be flushed after every print.


[+] loaded from JSON file /home/gbin/.proxmark3/preferences.json

[=] Using UART port /dev/ttyACM0

[=] Communicating with PM3 over USB-CDC

[usb|script] pm3 --> hw version


 [ Proxmark3 RFID instrument ]

 [ CLIENT ]

  Iceman/master/v4.14831-597-gdb2157661 2022-05-13 08:27:57 fcb68954e

  compiled with............. GCC 12.1.0

  platform.................. Linux / x86_64

  Readline support.......... present

  QT GUI support............ present

  native BT support......... present

  Python script support..... present

  Lua SWIG support.......... present

  Python SWIG support....... present


 [ PROXMARK3 ]

  firmware.................. PM3 GENERIC


 [ ARM ]
  bootrom: Iceman/master/v4.14831-597-gdb2157661 2022-05-13 08:27:55 fcb68954e
       os: Iceman/master/v4.14831-597-gdb2157661 2022-05-13 08:28:00 fcb68954e
  compiled with GCC 12.1.0

 [ FPGA ] 
  LF image 2s30vq100 2022-03-23 17:21:05
  HF image 2s30vq100 2022-03-23 17:21:16
  HF FeliCa image 2s30vq100 2022-03-23 17:21:27
  HF 15 image 2s30vq100 2022-03-23 17:21:38


 [ Hardware ]
  --= uC: AT91SAM7S512 Rev A
  --= Embedded Processor: ARM7TDMI
  --= Internal SRAM size: 64K bytes
  --= Architecture identifier: AT91SAM7Sxx Series
  --= Embedded flash memory 512K bytes ( 58% used )

I use tr() for filter in QFileDialog, but I forgot to use tr() for selected filter

Latest Iceman repo compiled on Ubuntu 22.04. No issues running ./pm on it's own, also no issues building your GUI.

However, with or without sudo when trying to connect to the client this occurs in the terminal.

PM3 Error: QProcess::FailedToStart "execvp: Permission denied"
QThread(0x55b12efc17b0)

I can see the ttyACM0, but currently unable to create a connection.

fixed connect question

系统环境：Win10
软件版本：V0.2.1-win-Officialclient

预加载脚本的绝对路径不能包含中文。
貌似是类似的问题：#15
比如将包含client的程序解压为至“D:\V0.2.1-win-Officialclient中文”亦或“D:\中文\V0.2.1-win-Officialclient”，预加载脚本则无法执行。

良心软件👍~~

Hi,

I'm trying to write a gen3 card, and specifically blk0 when i do

pm3 --> hf mf gen3blk -d 0465809AEC7181884400C820

the result i'm getting is
[+] Current block... 0465809AEC7181084400C82000000000

tried this with multiple fobs, keep getting the same result. so the 8 becomes a 0 after C7181 anyone know why or how this is possible... is it due to a bug or?

一般来说 Linux 下软件用户的配置文件存放

~/.config/proxmark3gui/GUIsettings.ini

现在是 proxmark3gui 运行时生成的配置文件是存放在运行时的位置。
如：

❯ proxmark3gui                            
QMetaObject::connectSlotsByName: No matching signal for on_Raw_keyPressed(QObject*,QEvent&)
QMetaObject::connectSlotsByName: No matching signal for on_MF_keyWidget_resized(QObject*,QEvent&)
QMetaObject::connectSlotsByName: No matching signal for on_portSearchTimer_timeout()
QMetaObject::connectSlotsByName: No matching signal for on_GroupBox_clicked(bool)
QMetaObject::connectSlotsByName: No matching signal for on_stopButton_clicked()
Using old client path storage
dock count 5
dock name "Mifare(IC)卡"
dock name "低频"
dock name "T55xx"
dock name "原始命令"
dock name "设置"
Failed to compute left/right minimum bearings for "mtx"
[1]    647241 segmentation fault (core dumped)  proxmark3gui

taotieren in 🌐 archlinux in proxmark3gui-git on  master [?] 
❯ ls
GUIsettings.ini  pkg  PKGBUILD  proxmark3gui-git  proxmark3gui-git-0.2.8.r0.ge2fb189-1-x86_64.pkg.tar.zst  src

taotieren in 🌐 archlinux in proxmark3gui-git on  master [?] 
❯ cat GUIsettings.ini                        
[Client_Env]
configFile=:/config/config_official.json
scriptPath=

[Client_Path]
path=proxmark3

[Client_keepClientActive]
state=true

[UI]
CMDFont_Name=Hack
CMDFont_Size=9
DataFont_Name=Hack
DataFont_Size=12
Font_Name=Alibaba PuHuiTi 2.0
Font_Size=9

[language]
name=zh_CN

计算nonces.bin在有些电脑上会显示
Couldn't read benchmark data. Assuming brute force rate of 120000000 states per second
请问这种情况一般是哪方面的问题。
12700h和7700h，12900h都试过，系统都是win11 22h2

win qt5.12.8
Proxmark3GUI-master\ui\mf_trailerdecoderdialog.cpp:18: error: no member named 'textChanged' in 'QSpinBox'

Proxmark3GUI-master\ui\mf_trailerdecoderdialog.cpp:18: error: 'textChanged' is not a member of 'QSpinBox'
connect(ui->C0Box, &QSpinBox::textChanged, this, &MF_trailerDecoderDialog::on_boxChanged);
^~~~~~~~~~~

新版本iceman客户端似乎改了不少命令

[usb|script] pm3 --> hf mf rdbl 0 A FFFFFFFFFFFF
hf mf rdbl: unexpected argument "0"
hf mf rdbl: unexpected argument "A"
hf mf rdbl: unexpected argument "FFFFFFFFFFFF"
[!] Try 'hf mf rdbl --help' for more information.


[usb|script] pm3 --> hf mf rdbl

Read MIFARE Classic block

usage:
    hf mf rdbl [-habv] --blk <dec> [-k <hex>]

options:
    -h, --help                     This help
    --blk <dec>                    block number
    -a                             input key type is key A (def)
    -b                             input key type is key B
    -k, --key <hex>                key, 6 hex bytes
    -v, --verbose                  verbose output


examples/notes:
    hf mf rdbl --blk 0 -k FFFFFFFFFFFF
    hf mf rdbl -b 3 -v             -> get block 3, decode sector trailer
                                  



[usb|script] pm3 --> hf mf rdbl --blk 1 -a -k FFFFFFFFFFFF


[=]   # | sector 00 / 0x00                                | ascii
[=] ----+-------------------------------------------------+-----------------
[=]   1 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................ 

Issue:
Trying to connect to a device on Ubuntu 22.04 failes with the error message:

unexpected output: "Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway.\n"

Steps to reproduce:

• Execute the GUI
• Push the Connect button

Preliminary analysis of the issue:
Using wayland promts in an additional message from the client. This is not expected from the GUI and breaks the connection. The issue is in the function PM3Process::connectPM3. Setting a breakpoint in the function is a work around, because then reading the output from the command line is delayed and the string os: is available in the result variable.

Proposed fix:
If the error message is in the result variable wait long until the expected string is available in the result variable.

根据之前请教的结果，更换了更大的存储，从256KB换到了512KB。
目前win10计算机无法识别设备，如下图。

PM3设备上所有灯常亮，Button没有反应。
尝试安装驱动，失败，截图如下。

现在没有太好的思路调试。一个想看看电路图，如果换了内存芯片，电阻有改变，需不需要更换某个电阻。另一个怀疑还是驱动的问题。请求指导和建议

https://github.com/dromara/issues-translate-action
The action for translating Non-English issues content to English.

See the 17th post in http://www.proxmark.org/forum/viewtopic.php?pid=42123
I used "isOk" as a flag to detect whether the sector data can be read.
However, in the newer RRG client, the "isOk" doesn't appear in the output.
So I need another way to detect whether "hf mf rdsc" returns the correct data.

Before running msgbox show "Can't load lang/zh_CN.ts as translation file.", miss "/"?

Hello, could you add AutoPwn attack, that would be awesome :)