PiAxe-Miner is the software needed to run the PiAxe and QAxe.

The repository with design files, BOM, ... can be found here!

Fork of: https://github.com/crypto-jeronimo/pyminer
Changes:

• Removed Scrypt hashing and added Miner class
• Made it work with Python3
• added PiAxe and QAxe as miner
• added reconnect logic on broken connections

The repository contains a dockered setup running on the Pi that shows some statistics:

The "blocks found" counter is static of course ...

Currently supported algorithms:

• sha256d: SHA256d

    python pyminer.py [-h] [-o URL] [-u USERNAME] [-p PASSWORD]
                         [-O USERNAME:PASSWORD] [-a ALGO] [-B] [-q]
                         [-P] [-d] [-v]

    -o URL, --url=              stratum mining server url
    -u USERNAME, --user=        username for mining server
    -p PASSWORD, --pass=        password for mining server
    -O USER:PASS, --userpass=   username:password pair for mining server

    -B, --background            run in the background as a daemon

    -q, --quiet                 suppress non-errors
    -P, --dump-protocol         show all JSON-RPC chatter
    -d, --debug                 show extra debug information

    -h, --help                  show the help message and exit
    -v, --version               show program's version number and exit


    Example:
        python pyminer.py -o stratum+tcp://foobar.com:3333 -u user -p passwd

• Raspberry Pi 3 (Pi Zero doesn't run influx)
• Python 3.x PIP
• PIP dependencies bech32==1.2.0 influxdb_client==1.38.0 pyserial==3.5b0 pytz==2021.1 PyYAML==6.0.1 Requests==2.31.0 rpi_hardware_pwm==0.1.4 smbus==1.1.post2 protobuf

Extra info: if your miner failes to start you might need to downgrade protobuf. But the logs shall provide detailed information about that.

configure the config.yml file to your needs change values like the miner type and debug value

Depending on your Device change between piaxe and qaxe in the miner setting.

Make sure to change to the correct USB Serial PiAxe:

  serial_port: "/dev/ttyS0"

Make sure to change to the correct USB Serial QAxe:

  serial_port_asic: "/dev/ttyACM0"
  serial_port_ctrl: "/dev/ttyACM1"

Disable the influx or point it to your externally managed influxdb, with the most recent changes the pi zero can no longer run grafana.

Change start_mainnet_publicpool_example.sh to your needs.

Activate debug_bm1366 to get a more detailed output in shell.