WeAct Black Pill board is series of small affordable boards with STM32F4x1 MCUs. These boards have the same format like BluePill, but have significantly more RAM, flash memory and have single precision floating point unit.

This repository provides Mbed OS 6 support for a board with STM32F411CEU6 MCU.

• STM32F411CEU6 in UFQFPN48 package
• ARM®32-bit Cortex®-M4 CPU
• 100 MHz max CPU frequency
• VDD from 1.7 V to 3.6 V
• 512 KB Flash
• 128 KB SRAM
• GPIO (32) with external interrupt capability
• All IO ports 5 V tolerant
• 12-bit ADC (1) with 10 channels
• RTC
• Timers (8)
• I2C (3)
• USART (3)
• SPI (3)
• I2S (3)
• SDIO (1)
• USB 2.0 full-speed

• Small foot-print
• Flexible board power supply: USB VBUS or external source (3.3V, 5V)
• User LED: LED1
• Programming/Debug port
• Type-C USB connector
• High speed external quartz oscillator 25 MHz
• Low speed external quartz oscillator 32,768 KHz

note: it should work with mbed-os 6.12 and higher.

After base mbed project creation and configuration perform the following configuration to set up board using mbed-cli or mbed-tools:

• mbed cli (Mbed CLI 1):

  1. Go to project root directory.
  2. Run mbed-cli add https://github.com/vznncv/TARGET_BLACKPILL_F411CE.git to add this library to your project.
  3. Copy custom_target.json from library folder to your project folder.
  4. Run mbed-cli target BLACKPILL_F411CE command to set default board.
  5. Run mbed-cli toolchain GCC_ARM to set default toolchain.
  6. Run mbed-cli export ... command if you use IDE, as new files have been added to you project.

• mbed tools (Mbed CLI 2)

  1. Go to project root directory.

  2. Create file TARGET_BLACKPILL_F411CE.lib with https://github.com/vznncv/TARGET_BLACKPILL_F411CE/ line.

  3. Run mbed-tools deploy to download library.

  4. Add the following lines to CMakeLists.txt:

     add_subdirectory(${CMAKE_CURRENT_SOURCE_DIR}/TARGET_BLACKPILL_F411CE)
     target_link_libraries(${APP_TARGET} mbed-blackpill-f411ce)
     

  5. Configure CMake project with command: mbed-tools configure --toolchain GCC_ARM --mbed-target BLACKPILL_F411CE --custom-targets-json TARGET_BLACKPILL_F411CE/custom_targets.json

note: currently only GCC ARM toolchain is supported.

To program/debug you project, connect hardware debugger and optionally usb to serial adapter to pins PA_3, PA_2 like it's shown bellow:

note: a serial adapter is requires only for printf/scanf functionality and tools that use it (like greentea tests).

Base examples can be found in the examples folder.

Unless specifically indicated otherwise in a file, files are licensed under the MIT license.