This repository was created for educational purposes. Present image will generate the Plumber API which will broadcast information via the Docker network. Another container linked to the same network will be able to read this information.

1. Clone the following repositories:

• https://github.com/vladdsm/shiny-merkle-tree -> LOCAL_FOLDERA
• https://github.com/vladdsm/docker-r-plumber -> LOCAL_FOLDERB

2. Edit the file 'Run_Plumber':

• replace default user/passwords
• change name of the Local folders -v [LOCAL_FOLDERA]:[...] and -v [LOCAL_FOLDERB]:[...]

Launch the executable file belonging to this repo Run_Plumber this starts:

• Container with R Plumber API
• Container Network
• 2 Containers with R Studio IDE

Purpose: write all relevant logic relevant to the End User e.g. deploy the GUI App

Access: Safari browser http://localhost:8787

Use: Launch the App that can be found in the mapped folder A

Purpose: write all relevant logic relevant e.g. prepare and test the API

Access: Chrome browser http://localhost:8797

Use: Launch the Plumber API that can be found in the mapped folder B

Purpose: deploy Plumber API

Access: via REST API GET calls from the Shiny Web App...

Use: press button 'Config' in the Shiny App

Launch the executable file Stop_Plumber (this will stop all the containers as well as remove the network)

This chapter is dedicated to note down the procedure that helps to understand if the docker network is working

• from Terminal we execute command to understand actors in the network my-net docker network inspect my-net
• resulting output is the ip addresses of the containers: API - 172.23.0.4 Prod - 172.23.0.3 Dev - 172.23.0.2 Gateway - 172.23.0.1 Subnet - 172.23.0.0

• ping API from Prod (RStudio Terminal) e.g. ping 172.23.0.1
• execute API GET request: -- URL: 172.23.0.4:8797 -- Endpoint: hash_unit
• result - OK

The IP address of the network [172.xx.0.y] is always increasing. Every time we will restart docker engine xx value will start from 18... so to insure the right url will be used for GET request we can use the network name which was specified as 'API'. URL for the GET request will be: url <- "API:8797/[endpoint]"