valvesoftware / source-sdk-2013 Goto Github PK
View Code? Open in Web Editor NEWThe 2013 edition of the Source SDK
Home Page: https://developer.valvesoftware.com/wiki/SDK2013_GettingStarted
License: Other
The 2013 edition of the Source SDK
Home Page: https://developer.valvesoftware.com/wiki/SDK2013_GettingStarted
License: Other
SOURCE 1 SDK LICENSE Source SDK Copyright(c) Valve Corp. THIS DOCUMENT DESCRIBES A CONTRACT BETWEEN YOU AND VALVE CORPORATION ("Valve"). PLEASE READ IT BEFORE DOWNLOADING OR USING THE SOURCE ENGINE SDK ("SDK"). BY DOWNLOADING AND/OR USING THE SOURCE ENGINE SDK YOU ACCEPT THIS LICENSE. IF YOU DO NOT AGREE TO THE TERMS OF THIS LICENSE PLEASE DON’T DOWNLOAD OR USE THE SDK. You may, free of charge, download and use the SDK to develop a modified Valve game running on the Source engine. You may distribute your modified Valve game in source and object code form, but only for free. Terms of use for Valve games are found in the Steam Subscriber Agreement located here: http://store.steampowered.com/subscriber_agreement/ You may copy, modify, and distribute the SDK and any modifications you make to the SDK in source and object code form, but only for free. Any distribution of this SDK must include this LICENSE file and thirdpartylegalnotices.txt. Any distribution of the SDK or a substantial portion of the SDK must include the above copyright notice and the following: DISCLAIMER OF WARRANTIES. THE SOURCE SDK AND ANY OTHER MATERIAL DOWNLOADED BY LICENSEE IS PROVIDED "AS IS". VALVE AND ITS SUPPLIERS DISCLAIM ALL WARRANTIES WITH RESPECT TO THE SDK, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, TITLE AND FITNESS FOR A PARTICULAR PURPOSE. LIMITATION OF LIABILITY. IN NO EVENT SHALL VALVE OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THE ENGINE AND/OR THE SDK, EVEN IF VALVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. If you would like to use the SDK for a commercial purpose, please contact Valve at [email protected].
First off, I would like to thank you for fixing Issue #54. Now users can work on their mods without porting anything to a different file nor using gameinfo hacks. Also, thanks for fixing the wireframe issue.
There are still now some issues because of this, but less critical.
First, any model that has texture with transparency or opaqueness shows up black in the 3D window and in the model viewer. This only happens in Hammer as far as I can tell.
Above I made my own Sourcescheme.res edit before this update to match the in-game tools. I pretty much did this for kicks. However this leads to the next 'issue'.
Since now the mod file is read first, Hammer picks up the source scheme first listed in the mod/game before the platform since most games use the HL2 sourcescheme, it will look like this:
A suggestion I have is to maybe make a clone of the sourcescheme.res file in the platform (naming it something like sourcecsheme_tools.res) and have hammer and other tools pick up the clone instead. This way, the game can have it's Sourcescheme settings for in-game without effecting the tools.
Last thing I want to point out is that I noticed that the 3D View looks different. It reminds me how the Source 2006 tools look back in the Source SDK compared to the other non-updated tools. Again, not a huge deal, just pointing it out.
Again, thanks for your hard work. If you want these issues split up for better management, just let me know.
In GameConfig.txt when the "GameDir" line is supplied with the user's sourcemod (e.g "GameDir" "C:\Program Files (x86)\Steam\steamapps\sourcemods\mod_hl2") with the VProject set to the user's mod, you get these errors:
As you can see, Issues include:
NOTE: There is also the error that the model should call a wireframe texture, but instead it has the checker board error texture when the model not selected. It's in this picture because I was getting all the errors in one snap for a discussion thread before I decided to let you know about it here. This is in ALL steampiped versions of Hammer. I'll make a new issue for that later if you would like.
If you were to link the tools from the SDK 2013 base to another game such as TF2, Counter-Strike: Source or even the sourcetest file, this issue vanishes! It seems like this build of Hammer does not like when a game/mod directory is outside the common folder.
A quick temp fix for modders is to have the GameDir of the GameConfig and VProject set to the sourcetest folder that is the base, and have the base load the mod directory. This is only a cheep patch, and issues with this is that Hammer puts HL2 in front of the user's loaded mod due to the "mod" being the sourcetest folder (when it should be the mod). This causes Hammer not to pick up on script manifests and some people in the MP base said they had issues loading custom models. But unfortunately I could not re-create this issue with the MP base.
Is this directory problem a left over from the Source MP tools, or are the sourcemods going under the common folder in the future?
I've plugged in the sample episode 2 mod, and was going to test an old navmesh from my 2007-engine mod, but I can't seem to find any of the commands. I do think if I tried, I could get them to work, but this kind of thing was readily available with the old engine, so it's a pretty big downgrade. I haven't analyzed all the differences, but I've noticed the HidingSpotList is missing, as well.
It seems that Source 2013 MP is no longer using HL2MPPlayerAnimState. Without it, player animations are choppy and left unpredicted.
While this is an easy issue to fix, I still think it should be reimplemented again.
Hello,
How would one go about updating the make files from visual studio?
Or is the only solution is to open them up copy paste and rename to include new files.
Thanks
I have an issue making with OSX 10.8.3 with XCode Version 4.6.3
The problem very well may exist between the keyboard and the chair.
I have command line tools installed for xcode (plus a reboot) but this is what I get.
in terminal where I am at "source-sdk-2013/sp/src"
I tried: $ make -f game_hl2_osx32.mak
Building: tier1
../devtools/makefile_base_posix.mak:192: *** Unable to find compiler, install and configure XCode. Stop.
make[1]: *** [tier1] Error 2
make: *** [all] Error 2
Then after looking through closed issues I tried: $ make -f game_episodic_osx32.mak SDKROOT=$(xcode-select --print-path)/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.8.sdk
Building: tier1
../devtools/makefile_base_posix.mak:192: *** Unable to find compiler, install and configure XCode. Stop.
make[1]: *** [tier1] Error 2
make: *** [all] Error 2
So, now that the SDK launcher is obsolete, how do you use Hammer and the other sdk tools to make content for your mod? The wiki only mentions how to compile the mod.
Do you use the executables in SDK 2013 base? The news page mentions running .bat files, but the base directory doesn't have set_sdk_env.bat.
I'm seeing this at the end of each build:
---- LINKING obj_server_hl2_linux32/release/server.so [release] ----
true -signvalve ./obj_server_hl2_linux32/release/server.so;
chmod: cannot access ‘../../../game/mod_hl2/bin/server.so’: No such file or directory
---- COPYING TO ../../../game/mod_hl2/bin/server.so [release] ----
chmod: cannot access ‘../../../game/mod_hl2/bin/server.so’: No such file or directory
chmod: cannot access ‘../../../game/mod_hl2/bin/server.so.dbg’: No such file or directory
/bin/sh: 1: ../../devtools/gendbg.sh: Permission denied
make[2]: *** [../../../game/mod_hl2/bin/server.so] Error 126
make[2]: Leaving directory `/home/niko/Projects/source-sdk-2013/sp/src/game/server'
make[1]: *** [server_hl2] Error 2
make[1]: Leaving directory `/home/niko/Projects/source-sdk-2013/sp/src'
make: *** [all] Error 2
It appears some or all shell scripts are lacking a +x and the chmod call fails.
Rather than providing separate build files for each platform it would be nice if you could provide files for a portable metabuild system like CMake which users can then use to generate files for their build system of choice (e.g. CodeBlocks, Eclipse, KDevelop, Make, Visual Studio, Xcode, etc).
Support for instancing is implemented in Hammer in both 2009 and 2013 branches, yet VBSP doesn't collapse them and complains about the entity, which normally gets removed after compiling it in newer versions of the engine.
Can't init func_instance
Attempted to create unknown entity type func_instance!
Implementing this would benefit in terms of designing the maps in mind with instances as L4D2, Alien Swarm and Portal 2 handles it.
I get this when running creategameprojects.bat:
C:\valve\source2013\mp\src>devtools\bin\vpc.exe /hl2mp +game /mksln games.sln
VPC - Valve Project Creator For Visual Studio, Xbox 360, PlayStation 3 (Build: Jun 5 2013 15:27:08)
(C) Copyright 1996-2010, Valve Corporation, All rights reserved.
Source Path: C:\valve\source2013\mp\src
Target Platform: win32
Generating for Visual Studio 2010.
Valid: 'client_hl2mp.vcxproj' Passes CRC Checks.
Valid: 'mathlib.vcxproj' Passes CRC Checks.
Valid: 'server_hl2mp.vcxproj' Passes CRC Checks.
Valid: 'tier1.vcxproj' Passes CRC Checks.
Valid: 'vgui_controls.vcxproj' Passes CRC Checks.
Building partial dependency set (libs only)........
Writing solution file C:\valve\source2013\mp\src\games.sln.
ERROR: Unable to find RegKey for .vcproj files in solutions.
I have these VS products installed:
...all of which are from the vcxproj
era, so it's not surprising that vcproj
isn't in my registry.
it is not longer possible to play two audio-files per actor at the same time in a scene file. the last starting sound is stopping the previous sound (still playing) immediately. This kills many possibilities in scene authoring.
Windows includes stripped pdbs for debugging, so you can see roughly where a crash occurs. Would this not be possible for the Source engine too, since it could help know where the crash has occurred, even for the sections where we don't have source access. These pdbs can be generated either directly from visual studio with the /PDBSTRIPPED argument ( http://msdn.microsoft.com/en-us/library/y87kw2fd(v=vs.100).aspx ) or with pdbcopy ( http://msdn.microsoft.com/en-us/library/ff560131%28VS.85%29.aspx ).
i just wanted to report, that the maya plugins are missing.
so actually people must get SFM to grab the I/O plugins for maya.
It would be great to commit the files and add them in "Common\Source SDK Base 2013 Singleplayer\bin\sdktools" or something like that.
Same problem with the photoshop Scripts that are missing : vst_compile_new_texture.js
vst_recompile_texture.js
My plugin project needs MSVC 2012 to work, so I tried to recompile the libraries (tier1, mathlib) under MSVC 2012, and it failed to compile snappy.cpp:
snappy-stub-internals.h(145): error C2220: warning treated as error - no 'object' file generated snappy-stub-internals.h(145): warning C4722 'snappy::LogMessageCrash::~LogMessageCrash' : destructor never returns, potential memory leak
I tried to find out a solution for the error, but it looks like you are using Snappy 1.0.3, which is quite old (Jun 2, 2011). I checked the last sources and they don't even seem to have a LogMessageCrash class, so I guess the error wouldn't be here.
Latest version is 1.1.0 (Feb 5, 2013). Any chance you can update?
Since a mod would not utilize both code bases, either split these two branches into different repositories or set them up in the style of Qt where the modules are split into separate sub-git-repositories.
This would allow for separation of concerns between the two and not have to maintain a completely redundant pipe for mods.
Also, the "common" code should be abstracted from mp/sp. I am just not sure why there is a split to begin with, really.
I am unable to get this project compiling. I believe this is due to me having a space in my username on Windows 7. I am using Visual Studio 2010.
Here is the step in the *.vcxproj where I believe I am failing:
https://github.com/ValveSoftware/source-sdk-2013/blob/master/sp/src/vgui2/vgui_controls/vgui_controls-2010.vcxproj#L348
This is apparently a known issue:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/0f4b7ad3-7875-40f1-bf94-cbf43cbf40f7/custombuild-and-the-wretched-msb6006-error
Here is my console output:
1> Running Protocol Buffer Compiler on htmlmessages.proto...
1> Smieja\Documents\GitHub\source-sdk-2013-rpgmod\sp\src\vgui2\chromehtml: No such file or directory
My full path is C:\Users\Robert Smieja\Documents
Is there anything that can be done to adjust this build step so it can work with usernames with spaces in them?
Inside makefile_base_posix.mak
, there are some assumptions as follows:
ifeq (,$(findstring 10.7, $(OSXVER)))
. Inside that ifeq
statement, the variable BUILDING_ON_LION
is set to 1
. This variable is never used again by any other file in the repository.ifeq ($(wildcard $(DEVELOPER_DIR)/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang),)
. Xcode has undergone many changes in the last few years (from /Developer
to an Install Xcode.app
to a standalone Xcode.app
) and any such assumptions are likely to break.SDKROOT ?= $(SDK_DIR)/MacOSX10.6.sdk
. Apple recommend always building against the latest SDK, and then settings the Deployment Target to the earliest OS you want to be able to run on. The current build settings use the 10.6 SDK and a 10.5 deployment target. Ideally, these binaries should be built with the latest SDK and 10.5 deployment target.#FIXME: NOTE:Full path specified because the xcode 4.0 preview has a terribly broken dsymutil, so ref the 3.2 one
. Although I'm not even sure that the line below that comment actually does what the comment suggests it does, since I know I don't have Xcode 3.x installed on this Mac, it must be using the 4.x one.Many of these assumptions can be removed by using xcrun
to locate binaries. Finding SDKROOT
dynamically is a little bit hacky, but doable. (It gets easier with the Xcode 5 developer preview).
I've fixed these assumptions in 7c500c5 (edit: and 71415f4). Is this a) acceptable, and b) is it mergeable or does it require a change to VPC on your end?
When you compile EverythingSP_SDK-2013 using Visual Studio 2012, it generates massive amounts of LNK2001 errors, followed by some LNK2019 errors and a LNK1120, which blocks the compilation.
I am pretty well aware how to map for 2009 engine, but have no clue what to do for this one.
Do I... make 2009 maps and port them?
Or do I make a config?
A walkthrough would be nicem
Replay support as included in the SDK code relies heavily on some missing files to do with tf2, steamworks or otherwise. Some of this can be worked around, however, some classes are used though the definitions can not be seen as they are in the game specific files (tf2 or css). Another missing file (and likely lib) is moviecontrols, as DmeTime_t is referenced, and supposedly found in moviecontrols/timeutils.h. In the Alien Swarm SDK this was in tier1 though it now seems to have been moved. Additionally it's also possible that the engine may not have replay support enabled either.
I seem to be having trouble using the protoc program in osx mountain lion.
every time i try to run it I get a segmentation fault.
this prevents me from compiling the client library successfully.
the server library compiles fine but i have not tested it.
I plan on compiling protoc myself since i found its open source.
im compiling the sdk on a mid 2010 macbook. (MacBook7,1)
It appears to be missing a library "sapi51.lib"
A quick search in the files didn't seem to turn it up.
I'm on Visual Studio 2010 on Windows 7 x64 bit
2>LINK : fatal error LNK1104: cannot open file '..\sapi51\lib\i386\sapi.lib'
Would we need to install the Microsoft Speech SDK in order to compile this?
Both of the SDK 2013 Bases currently crash (in pet.dll) to desktop when you attempt to save a PCF. Happens with both saving and saving as, the save location doesn't matter either. Happening in the base itself and any derived mods.
I can upload a crash dump if needed but it's not difficult to replicate.
So game is not executing autoexec.cfg
.
You cannot compile EverythingSP_SDK-2010 solution using Visual C++ 2010 Express, because "atlbase.h" and "afxwin.h" are missing, which are part of two packs that are only distributed with the paid version of Visual Studio.
In lines 172 of makefile_base_posix.mak
, the COMPILER_BIN_DIR
is set to ${DEVELOPER_DIR}/usr/bin
, but the makefile looks in a completely different place for clang (as seen on line 178).
On my system, clang exists in the place being looked in but it does not exist in COMPILER_BIN_DIR
- which results in the error, "Unable to find compiler, install and configure XCode".
Related code is highlighted at the following link:
And an example of my file structure can be found here:
Mappers can't create entities in Hammer and the engine defaults to DX8 every time it loads.
I'm sorry but I'm completely confused and not sure what to do I have downloaded X code 4.6.2 and command line tools and the Source-sdk-2013-master file. I'm not sure what to do now. What do I open to put the code in? I have opened terminal and tried to type in whats in issues 37 but it says that no file or directory is found. Sorry I'm completely new to this.
I'm new to sourcesdk but I can't break any prop with this new source sdk base 2013 singleplayer
Console output
AddMultiDamage: g_MultiDamage.GetDamageForce() == vec3_origin
CBaseEntity::TakeDamage: with inputInfo.GetDamageForce() == vec3_origin
baseentity.cpp (1563) : Assertion Failed: force != vec3_origin && offset != vec3_origin
I set up everything correctly, but when I go to debug, it gives me the errors:
"Debugging info for 'hl2.exe' cannot be found or does not match. Cannot find or open the PDB file
Do you want to continute debugging?"
I then click yes, and it gives me:
Setup file 'gameinfo.txt' doesn't exist in subdirectory 'hl2'.
Check your -game parameter or VCONFIG setting.
I am lost, I have no clue what to do.
I see this issue quite everywhere now, the cubemaps don't seem to work.
I can use the buildcubemaps command normally but it has no effect. Deleting the default black cubemaps from the bsp file leaves me with pink/black textured reflective floor.
Where does this issue come from?
It's currently not possible for modders to compile binary DMX models with the new build of studiomdl. We don't have dmxconvert to upgrade our data or an exporter which generates up-to-date DMX files.
I'm going through the compiler warnings on OS X and cleaning up what I can, but I'm stumped by this one.
In props.cpp on line 1520, there's an equality check between a PhysGunDrop_t
and a PhysGunPickup_t
: https://github.com/ValveSoftware/source-sdk-2013/blob/master/mp/src/game/server/props.cpp#L1520
Logically, this check makes no sense, as you logically can't drop a prop for because of a pickup reason. This expression would then evaluate to the PhysGunDrop_t
with the same integer value:
if ( Reason == THROWN_BY_PLAYER )
which makes no sense either. Why play a punt sound with no punt involved?
What's this conditional supposed to be doing?
HLMV can't load models in vpks ("(Steam) Load Model") if they are under a sub directory. For example, it can load up "models/Barney.mdl" fine. But when you try to open a sub folder, (e.g models/props) you get an error saying the file directory does not exist.
With Multicore Rendering enabled, the console can occasionally print messages out of order.
For example:
] find client
"cl_ent_absbox"
"cl_ent_bbox"
client client cheat cheat
- Displays the client's absbox for the entity under the crosshair.
- Displays the client's bounding box for the entity under the crosshair.
"cl_ent_rbox"
client cheat- Displays the client's render box for the entity under the crosshair.
- Find and list all client entities with classnames that contain the specified substring.
Format: cl_find_ent"cl_find_ent"
"cl_find_ent_index"
client client cheat cheat
- Display data for clientside entity matching specified index.
Format: cl_find_ent_index] status
hostname: Half-Life 2 Deathmatch
version : 1.0.7.0/24 5337 insecure
udp/ip : 192.168.1.5:27015 (public ip: X.X.X.X)
map : nmo_broadway at: 682 x, -396 y, 137 z4 "essbuh" (...) 05:23 14 0 active loopback
players : 1 (16 max)
userid name uniqueid connected ping loss state adr
] status
hostname: Half-Life 2 Deathmatch
version : 1.0.7.0/24 5337 insecure
udp/ip : 192.168.1.5:27015 (public ip: X.X.X.X)
map : nmo_broadway at: 682 x, -396 y, 137 z
players : 1 (16 max)4 "essbuh" (...) 05:24 14 0 active loopback
userid name uniqueid connected ping loss state adr
This does not seem to happen with multicore rendering disabled.
First, I am TOTALLY new to this so sorry if I am doing everything completely wrong. I followed the instructions at https://developer.valvesoftware.com/wiki/SDK2013_GettingStarted, starting by downloading XCode (and Command Line Tools) then doing "cd /Users/-username-/Downloads/source-sdk-2013-master/sp/src" and then typing the command they provided: "make -f game_episodic_osx32.mak" after that it gives me this: http://pastebin.com/B50JuzGE.
This sdk contains code which is incompatible with the current release of TF2. A bit of synchronization between the TF2 codebase and this sdk needs to be done in order to get TF2 server plugins running like in the old sdk.
An example of this is in tier0 in the CThread class from threadtools.h where two member variables were added in this sdk, but these members do not appear in the current TF2 libtier0_srv server binary.
From the 2013 sdk:
#ifdef _WIN32
HANDLE m_hThread;
ThreadId_t m_threadId;
#elif defined(POSIX)
pthread_t m_threadId;
#endif
CInterlockedInt m_nSuspendCount;
CThreadEvent m_SuspendEvent;
CThreadEvent m_SuspendEventSignal;
int m_result;
char m_szName[32];
void * m_pStackBase;
unsigned m_flags;
The current release of TF2:
#ifdef _WIN32
HANDLE m_hThread;
ThreadId_t m_threadId;
#elif defined(POSIX)
pthread_t m_threadId;
#endif
CInterlockedInt m_nSuspendCount;
int m_result;
char m_szName[32];
void * m_pStackBase;
unsigned m_flags;
This doesn't matter in windows builds since the sdk supplies tier0.lib for static linking, but in linux builds where dynamic linking is necessary, this is an issue.
Also, the new serverplugin_empty project when build with SAMPLE_TF2_PLUGIN defined fails to compile due to missing sdk files and outdated interfaces.
I'll assume that this is being worked on, so maybe this issue can be kept up as a status of getting TF2 updated. Creating an issue in https://github.com/ValveSoftware/Source-1-Games is also an option.
I copied the sapi51\lib\i386\ as it was stated at the Getting Started Wiki,but now I get the following errors:
Error 1 error LNK2001: unresolved external symbol _IID_ISpPhoneticAlphabetSelection C:\Users\Dimitris\Desktop\mod\src\utils\phonemeextractor\phonemeextractor.obj Phonemeextractor
Error 2 error LNK1120: 1 unresolved externals C:\Users\Dimitris\Desktop\mod\src\utils\phonemeextractor\Debug\win32\phonemeextractor.dll Phonemeextractor
I found out that the ISpPhoneticAlphabetSelection is a new feature in sapi5.3, so sapi5.1 should not have this.
The @ValveSoftware GitHub account doesn't have a user image.
While it's a cosmetic change, it makes the account look much more presentable.
I know it's not specific to this repository, but no other place to make the bug report/feature request.
There are no dedicated server files included with the multiplayer base (at least on Windows) nor does there seem to be a separate app id existing for this yet.
At the minimum, srcds.exe and bin/dedicated.dll are necessary (and their linux equivalents).
I did all of the installation instructions, and it keeps bugging out. Visual Studio cant build some dll's which is an issue, and there is a million files to go through just to get to the mod content. I was expecting the update to still have the launcher that builds everything for you. The only thing I wanted in the update was the fix for the Steam Pipe port over. Now there is no Launcher. Great. I am extremely dissapointed because I wanted to make a mod, but it's 99.9% impossible. Now my mod is cancelled. I have put hours into it, and it's gone. Gone. Please bring back the launcher and make it simple again.
When I enter the "lightprobe" command into the ingame console, the engine crashes everytime.
This command works fine with 2007 engine branch.
All of the shaders and the project itself are missing.
There isn't even a src/materialsystem directory.
I know that having support for shaders on all platforms is a difficult thing to do but can't at least the Windows code be added back? Or will we have to try to merge it from Source2007 code manually?
The player can't grab Ammo in Singleplayer base and Multiplayer base
It's impossible for one to open the stock models in say... TF2 without extracting the models from the VPKs. Model viewer has a (Steam) Load Model option that works around this. Face Poser lacks this.
Title says it all... no error messages or anything else... it just freezes and won't unfreeze!
For the repository description & website, can you add the instructions url to the repository description?
This will make the instructions to build the software available to anyone new to the repository.
Another alternative would be to repurpose the Readme
to include these instructions.
---- LINKING obj_server_hl2_osx32/release/server.dylib [release] ----
true -signvalve ./obj_server_hl2_osx32/release/server.dylib;
chmod: ../../../game/mod_hl2/bin/server.dylib: No such file or directory
---- COPYING TO ../../../game/mod_hl2/bin/server.dylib [release] ----
chmod: ../../../game/mod_hl2/bin/server.dylib: No such file or directory
chmod: ../../../game/mod_hl2/bin/server.dylib.dSYM: No such file or directory
[01:44am yaakov@Helios:~/Development/source-sdk-2013/sp/src] (branch: master) $ ls ../game/mod_hl2/bin/
client.dylib client.dylib.dSYM server.dylib server.dylib.dSYM
This also happens for game_hl2mp_osx
, I haven't tried any others yet.
Should I be invoking make
from a different directory, or is the makefile wrong?
The dylib files are executable anyway, so I'm not entirely sure what chmod is trying to achieve.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.