A set of hand-coded FMUs for development, testing and debugging of the Functional Mock-up Interface.

• BouncingBall - a bouncing ball model with state events
• Dahlquist - Dahlquist test equation
• Feedthrough - all variable types
• LinearTransform - arrays and structural parameters
• Resource - load data from a file
• Stair - a counter with time events
• VanDerPol - Van der Pol test equation

Use the fmusim executable to simulate an FMU:

> fmusim --help
Usage: fmusim [OPTION]... [FMU]
Simulate a Functional Mock-up Unit and write the output to result.csv.

  --help                        display this help and exit
  --interface-type [me|cs]      the interface type to use
  --start-time [VALUE]          set the start time
  --stop-time [VALUE]           set the stop time
  --output-interval [VALUE]     set the output interval
  --start-value [name] [value]  set a start value
  --output-variable [name]      record a specific variable
  --input-file [FILE]           read input from a CSV file
  --output-file [FILE]          write output to a CSV file
  --log-fmi-calls               log FMI calls
  --fmi-log-file [FILE]         set the FMI log file
  --solver [euler|cvode]        the solver to use
  --early-return-allowed        allow early return
  --event-mode-used             use event mode
  --record-intermediate-values  record outputs in intermediate update

Example:

  fmusim BouncingBall.fmu  simulate with the default settings

You can download the pre-built Reference FMUs and fmusim executables from releases.

<model>

• config.h - model specific types and definitions
• FMI{1CS|1ME|2|3}.xml - model descriptions
• model.c - implementation of the model

include

• fmi{|2|3}Functions.h - FMI header files
• model.h - generic model interface
• cosimulation.h - generic co-simulation interface

src

• fmi{1|2|3}Functions.c - FMI implementations
• cosimulation.c - generic co-simulation

examples

• *.c - various FMI 3.0 import examples
• Examples.cmake - CMake configuration for the example projects

fmusim

• sources of the fmusim executable

To build the FMUs you need CMake and a supported build tool e.g. Visual Studio ≥ 2013 , Xcode or make:

• download or clone the repository

• open the CMakeGUI

• click Browse Source... and select the cloned or downloaded and extracted repository (that contains CMakeLists.txt)

• click Browse Build... and select the folder where you want build the FMUs

• click Configure and select the generator for your IDE / build tool

• select the FMI_VERSION you want to build and optionally the FMI_TYPE (only for FMI 1.0)

• click Generate to generate the project files

• click Open Project or open the project in your build tool

• build the project

The FMUs will be in the dist folder inside the selected build folder.

Copyright © 2022, Modelica Association Project "FMI". All rights reserved. The code is released under the 2-Clause BSD License.

The Reference FMUs are a fork of the Test FMUs by Dassault Systèmes, which are a fork of the FMU SDK by QTronic, both released under the 2-Clause BSD License.