This repository contains Eclipse plug-ins that allow writing and validating Social, Legal, Ethical, Empathetic and Cultural (SLEEC) rules, and checking whether a design model, written in RoboChart, conforms to a set of SLEEC rules.

Details on the SLEEC framework can be found in related papers, namely arXiv:2307.03697.

For running the tool:

• Java 11 or higher.
• FDR4 for analysis of redundancy, conflict and conformance, available from https://cocotec.io/fdr/. Stepwise installation instructions available below.

The instructions in this file target building and execution of SLEEC-TK under Ubuntu LTS (22.04) Linux (x86_64), which is the platform used for development and testing. While the tool has been tested to run under Java 11 it may be possible to run it on more recent versions of Java due to Java's backward compatibility. Please note that for building from source Java 11 is required.

The plug-ins, as well as a standalone version of the SLEEC core tool for validation, can be built from the source code in this repository. Below are requirements and stepwise instructions.

For building, the following software must be available:

• Java 11
• Maven (running under Java 11)

Clone this git repository on your machine. In the root folder issue the command mvn install. If there are multiple JRE/JDKs on your machine, please make sure that the environment variable JAVA_HOME points to the JRE/JDK for Java 11, otherwise the Maven build may fail. Changing the environment variable can be done using export JAVA_HOME=... and passing the path for the JRE/JDK installation. Alternatively, it may also be possible to change it using the command update-alternatives --config java.

To check that Maven is running under the correct Java version the command mvn --version can be used. A correct configuration will output something similar to the following:

$ mvn --version
Apache Maven 3.6.3
Maven home: /usr/share/maven
Java version: 11.0.21, vendor: Ubuntu, runtime: /usr/lib/jvm/java-11-openjdk-amd64
Default locale: en_GB, platform encoding: UTF-8
OS name: "linux", version: "5.15.0-92-generic", arch: "amd64", family: "unix"

There are two ways to install the SLEEC-TK tool: (1) using the code manually compiled following the stepwise instructions above; (2) using a pre-compiled version made available in the releases of this repository. Below, we describe both ways in more detail.

Once the build has succeeded, the tool can be installed by using the Eclipse Installer and the Eclipse Product file RoboTool_and_SLEEC.setup.

1. Download the Eclipse Installer 2023-09 R from https://www.eclipse.org/downloads/packages/installer, extract and run it.
2. When the window with the installation options appears, click the hamburger button on the top-right corner. Deselect Bundle Pools and click on Advanced mode.
3. Click the green plus button (+) on the top-right corner. A dialog titled Add User Products will appear. Find the file RoboTool_and_SLEEC.setup, and then press OK.
4. Select a Java VM (version 11 or higher). Note that here the Eclipse installer will by default list JVMs that are installed locally, which may include other versions. If there is no version suitable listed, then select a compatible Java Runtime Environment (JRE) for installation. It is also recommended that Bundle Pool is left disabled.
5. Click Next twice and for the field SLEEC Tool repository location browse to the folder repository of your local clone of this repository.
6. Click Next and finally Finish.
7. During the installation, which should take a couple of minutes, you will be prompted to:
   • Accept the EPL license: we recommend toggling Remember accepted licenses.
   • Trust unsigned content of unknown origin: you will need to click on Select All followed by Trust Selected.
8. At the end of this process, if everything succeeds, Eclipse 2021 will be launched automatically with the plug-ins in this folder installed, as well as the required dependencies (eg. Xtext, Sirius, RoboChart). You can then click Finish to exit the installer.

Pre-compiled releases for SLEEC-TK are available in this repository, which can be used to run the tool without having to manually compile it first.

1. Download a .zip file from the releases of this repository for your platform.
2. Extract the archive file.
3. Run the Eclipse binary.

In addition to the Eclipse environment, one can execute a jar file using the command line interface for performing conflict and redundancy checking.

java -jar sleec-core/circus.robocalc.sleec/target/sleec.jar [file.sleec]

We recommend that the above command is executed in the context of an Eclipse project, by first changing directory, for example:

cd examples/ALMI
java -jar ../../sleec-core/circus.robocalc.sleec/target/sleec.jar ALMI-demo.sleec

In this case, a directory src-gen is created with the calculated semantics from the SLEEC file ALMI-demo.sleec.

General instructions for installation are avaiable from https://cocotec.io/fdr/. Below we include specific instructions useful for installation on recent versions of Ubuntu LTS (22.04). Root privileges are necessary to install FDR4 using its debian package.

Under Ubuntu, installation can be achieved by using apt-get using the following commands:

sudo sh -c 'echo "deb http://dl.cocotec.io/fdr/debian/ fdr release\n" > /etc/apt/sources.list.d/fdr.list'
wget -qO - http://dl.cocotec.io/fdr/linux_deploy.key | sudo apt-key add -
sudo apt-get update
sudo apt-get install fdr

The apt-get install may fail due to a missing dependency on libpng12, which is no longer included in recent Linux distributions. To workaround this problem, the following commands can be used to install the missing dependency:

sudo add-apt-repository ppa:linuxuprising/libpng12
sudo apt-get update
sudo apt-get install libpng12-0

Recent Linux distributions have changed the path where TLS Certificate Authority (CA) certificates are stored. FDR looks for this under /etc/pki/tls/certs/ca-bundle.crt, however Ubuntu LTS 22.04 has such certificates available under /etc/ssl/certs/ca-certificates.crt. FDR, may, therefore fail to connect to its licensing servers as a result. To workaround this issue, create a symlink using the following commands:

sudo mkdir -p /etc/pki/tls/certs/
sudo ln -s /etc/ssl/certs/ca-certificates.crt /etc/pki/tls/certs/ca-bundle.crt

FDR4 must be activated before performing any verification activity. The first time FDR4 is executed a dialog will appear with instructions for activation. Alternatively, this can also be achieved by running the following command in the terminal and following the instructions that appear aftewards:

refines test.csp

To demonstrate use of the SLEEC tool, an example is provided as an Eclipse project under the folder examples/ALMI.

Further details on the usage of the SLEEC tool can be found in the SLEEC documentation, while for RoboChart this can be found in the RoboTool manual. For convenience, below, we include instructions for getting started with a demo example included in this repository.

This can be loaded into Eclipse by using its EGit import facility:

1. In a running installation of the SLEEC Tool (in a running instance of Eclipse), select File > Import. After the Import wizzard dialog appears, select Git > Projects from Git (with smart import) and click Next.
2. When the pane Select Repository Source appears, select Existing local repository and click Next.
3. When the pane Select a Git Repository appears, click on Add. A new dialog will appear to facilitate locating the cloned copy of this repository. Click on Browse and locate it as appropriate. Then, in the list below, select the repository, and then click on Add.
   • Alternatively, if the above fails, this repository can be cloned using the URL https://github.com/UoY-RoboStar/SLEEC/ directly.
4. Back in the pane Select a Git Repository, select the newly added repository and press Next.
5. In the pane named Import projects from File System or Archive, click Deselect All. Afterwards, search for the repository whose folder includes the path examples/ALMI and select it.
6. Finally click on Finish. The new project will now be loaded and appear under the view Project Explorer. You may expand the project view by clicking on the arrows to expand the file tree.

This Eclipse project contains SLEEC rules in the file ALMI-demo.sleec and a RoboChart model specified across two packages in files main.rct and system.rct. After importing the project a prompt should appear to load the graphical representation for the RoboChart models. If not, these can be loaded by expanding the tree under the file representations.aird in the Project Explorer view and double-clicking on the package of interest.

There are there files generated under the src-gen folder for rule consistency checking: 1)instantiations.csp file, where users can override a default bound for numeric types necessary for model checking; 2)a file with the same name as the SLEEC specification but extension.csp that contains the CSP semantics of the SLEEC rules; and 3)a file whose name includes the suffix -assertions. To perform conflict and redundancy checking, one needs to the execute the third file. In the example of ALMI project, the file is supposed to be called ALMI-demo-assertions.csp. This file can be run either by right clicking and choose FDR as it is installed in your machine and FDR GUI will pop up; or from your terminal by running an FDR command, e.g. refines -q --format plain --brief ALMI-demo-assertions.csp > path folder/output.txt which will generate the results in the output.txt file.

Before performing any verification ensure that FDR4 is correctly installed and configured, and activated, as described above. In the sample project ALMI, a file named verification.assertions contains a collection of functional and sleec assertions. It can be loaded for edition by double-clicking on the file.

If the tool cannot find FDR's path it will raise an error Could not find refines. In this case, configure its path manually by going to Window > Preferences > RoboChart > Analysis and locating FDR's installation folder, which will vary depending on your installation (eg. /opt/fdr/bin). This configuration step is only valid for Linux.

To run the verifications from within the Eclipse environment, right-click on the file verification.assertions and select RoboTool > CSP > Run.... If FDR is correctly configured, the verification will be performed in the background and a new file verification_results.html will be automatically opened. This file contains a table of results for the verification of all assertions in the file verification.assertions.

Alternatively, the file csp-gen/timed/file_verification.csp automatically generated under the project folder can be loaded into FDR for a more in-depth analysis of counter-examples.