unknownx7 / cammy Goto Github PK

Issue: After I use the /sit command, then either press a movement key or use the /sit command again to stand, the camera does not update. The camera appears to still point downwards as if I'm still sitting. To fix the camera, I have to manually reactivate the preset. Not sure if a QoL bar would fix this, as I do not use one.

My preset:

Besides this issue, I love this plugin - great work!

I love this tool and the freedom it gives, unfortunately a lot of the bindings used by FFXIV's built in Duty Recorder can not be changed.

Pressing space to raise/lower the camera in Cammy also pauses/plays the fight. Typing /cammy zoom 100 resets the camera because I hit both the "Z" key and the "C" key. This has a lot of potential to help make some really cool XIV cinematics for current savages/extremes barring some interface choices that conflict with the Duty Recorder.

Since the Cammy fix in 6.2 I noticed that turning the camera while in freecam mode makes characters shake. It doesn't seem to happen while having the "???" setting on 0. But that on the other hand scuffes the freecam controls. I'll attach a video that shows the issue on an NPC

Just that /freecam or something so I can put it on QoL bar

Upon entering the free cam, unless my character is sitting, the camera will aim downwards. This issue seemed to be resolved when I set the bar below Death Cam mode to 0 but then my Freecam controls were reversed.

have isolated this log error to only occurring when Cammy is installed.

2022-07-03 02:45:53.059 -07:00 [ERR] [ChatTwo] UiBuilder OnBuildUi caught exception System.NullReferenceException: Object reference not set to an instance of an object. at ChatTwo.PluginUi.Draw() in /home/build/ChatTwo/ChatTwo/PluginUi.cs:line 137 at Dalamud.Interface.UiBuilder.OnDraw() in C:\goatsoft\companysecrets\dalamud\Interface\UiBuilder.cs:line 473

i am going to open a similar issue on chat 2's repo.

I think this problem was fixed before in 736d859

but as of 6.4 it's back, camera height offset doesn't stick on zone changes.

Hello,

I'm using XBOX elite 2 but when I adjust the delta setting only zooming using mouse scrolling is affected and the controller is still slow.

I have a QoLBar preset defined by conditionflag = occupiedinquestevent. I associated it to a cammy preset but cammy doesn't switch to it automatically. qolbar is detected.

Thank you for the amazing plugin, it made gposing so much easier. I hope this is the appropriate place to suggest these features, I know Anamnesis can delimit the camera and allow you to look straight up, so maybe Cammy could too? And an option to disable the addon and make the camera work as default when entering any sort of content like dungeons, raids, trials, etc. would be great.

Just a small bug that I noticed today after the recent updates to Cammy.

Cammy causes a permanent black screen (most likely bad camera placement?) with a permanent loading icon at the bottom right of the screen when going afk while targeting self and having the Idle Camera feature active.
Tested it with Cammy disabled and using the "/icam" command and the icam worked fine again.

No idea where that suddenly came from, never had that problem before with Cammy installed.

There are times I like having freecam on while hanging out with a bunch of friends. It's super frustrating when talking to them that whenever I press C it will reset my camera. Is there any chance you can add an option to either rebind, or completely remove the keybind for that? It would be amazing.

Know issue?

Heyo UnknownX7 and sorry for another small bug report ^^"

I just noticed that setting "View Bobbing" to "First Person" has wrong camera placement compared to the other modes. If you choose "First Person", then the Third Person Camera gets placed around the hip level instead of where it should be compared to the other modes.

(Camera placement with View Bobbing on is slightly different compared to the one without. Not sure if that is a bug or intended.)

And thanks for fixing the idle cam bug report that quick! Appreciate it alot!

Would love to see a toggle option for allowing the camera to align itself to the position, height, and rotation/tilt of the character head, instead of only the height and position.

Uhm so if i try to copy paste something in chat or stuff it resets my cam (im in freecam when this happens dunno if that matters tho) and i was wondering if thats a bug or intentional and if so can u pls add a option to change that keybind since this is very very hindering and means i have to disable the plugin if im not needing freecam :/

I noticed when I hit a wall, my camera zooms all the way back out, although it does very very slowly. Is there a way to make this faster or is the function not able to be added.

Also, is there a function in-game or using another plugin to allow my draw distance to be higher?
Or a way to make my draw distance change depending on where freecams?
If not then [feature request] if this is able to be coded.

All in all this is a great plugin and allows for absolutely stunning pictures + more.

We have up/down, left/right, leaving one axis unused.
Is this something that can be added?

In the title menu of a game, if click around the upper right corner of the screen
everything from the title logo and menu disappears, leaving only the background.

In such cases, the easiest solution is to temporarily disable Cammy.
However, this should be set to allow Dalamud access from the title screen.

If you're using a bed doze and try to move freecam, it will cause your character to stand back up.

I am just reporting this here as well, just in case.

Earlier versions of Cammy did not cause any problems, but I noticed, that the latest update for Cammy somehow creates a conflict with Anamnesis. As soon as Cammy is installed, Anamnesis can no longer modify the X Y Z values (Angle etc pp still works).

Hello like the others I am having the same issue with the current update.

Also wanted to say great plugin I love it for exploring zones.

Have a great day!

hello,i use it in game,and i want to use other key. but i don not konw what int to the congifkey.can you tell me?

When using the freecam during gpose all the controls double up, so if pressing D to move the camera to the right, it'll also roll clockwise making it really awkward to use.

for some reason Cammy just looks at the ground, I can make it move around a little bit but is generally stuck looking at the dirt

HI,
I have been using this plugin for a long time and quite like how it makes my life easier, but currently, the new update for Chinese player to 6.11 just disable this plugin to work (after I click the update all button on Dalamud... That was a mistake), I wonder if you have an older vision of this plugin that I can install？

Just what the title says. It'd be nice to have an option so that I don't have to see the additional controls message pop up in chat every time I switch to freecam.

i am getting a ctd most times i try to use the aesthetician/character editor with this plugin enabled, (4/5 times) i disabled the plugin and tested using the aesthetician 5 times and didnt get any crashes.

Even after uninstalling Cammy the camera remains in the wrong position

Is there a way to change vertical fov as well as horizontal one. It seems to me that vertical fov remains unchanged, am I wrong?

The last update changed my default camera angle
I do not use any settings in cammy whatsoever besides freecam

This feature is absolutely amazing for cinematography! It's something of a dream come true when it comes to creative framing in story telling.

Controller support exists insofar as being able to rotate the camera, but also being able to navigate with the left analog stick would be lovely. I ask since controller movement and panning can allow from smoother and more dynamic presentation. I sincerely hope this is implementable!

As a quick aside, would it at all be possible to switch back to character movement whilst still within free-cam mode? This would open up many possibilities!

Thank you for all the hard work. It's greatly appreciated.

Hi, love this addon. I have conditions in QoL Bar assigned so Cammy can automatically set my camera to a defined distance under certain conditions. Works great, but my issue is sometimes the camera zooms smoothly, and other times it just snaps abruptly to the desired distance. Is there a way for me to keep it moving smoothly? The snap is really jarring. Big thanks to the author.

Zoom delta sometimes doesn't function and reloading fixes it.
Thank you for this plugin!

Hotfix broke cammy and crashes the game upon startup. Binary testing of plugins confirmed this for me personally: cammy disabled/deleted from plugin folder the game started fine, pasted/reenabled it crashed the game upon loading.

let me know if you need anything from me.

The camera will pan upwards and then snap back to its proper position when zooming in or out from a certain distance.

Heyo UnknownX,

FreeCam currently works flawlessly during normal gameplay, but are there plans to have it working properly in GPose as well? (Camera movement is "borked" right now in GPose)

Cheers,

Maxunit

In "Other Settings" the "Disable Camera Collision" must be re enable at every restart of the game.

Please make "Disable Camera Collision" persistent.

So something that has happening since the last FFXIV update is that something with the settings under "Other Settings" either gets ignored or resets itself every session (even "spectate focus/soft target" and those options somehow doesnt save either) and i think it may be because Cammy is unable to check if QoLBar is enabled or not, because even with it installed, it still sometimes starts up as "Disabled", even tho it's installed and hence i have to manually check the status on every session.
Makes it frustrating when you have presets tied to QoL Bar and they dont load until you manually recheck in the settings itself.

edit: like this

Very good plugin!
I have some features suggestions :

• bind fov change to a command, macro or keybind.
• make some zoom / fov sets based on conditions, like DynamicCam for WoW :
  https://www.curseforge.com/wow/addons/dynamiccam

Is it possible to implement this?

The plugins window says:
"Download failed (https://github.com/UnknownX7/Cammy.git)" in red color, and obviously it doesnt show Cammy on the plugin installer so I cant really install it, anybody knows how to fix it?

Hey, I wanted to say that this plugin is amazing, but I've come across a very annoying issue. I have set the FOV in FFXIV but every time I go to a merchant and exit the merchants menu the game changes my FOV and zooms in effectively making the plugin not work anymore. I need to then manually go back into the plugin settings and select the profile I've made in order for it to work again.

Is there a way you can code something to lock the camera to my settings without it ever being able to be changed? OR if you can add a setting that allows you to map your settings to a specific key on the keyboard that you can hit to retune your FOV to the setting of the app that would be GREAT! Is this possible?

New issue since updating today. This is something I've noticed most when interacting with the summoning bell, but it happens any time the camera focuses on a different character/object/etc IE locking on.
https://imgur.com/a/2lmJsnx
Above is a link to an example video of the issue, see how the camera dips and then jumps back into the proper place when locking onto the NPC, and the usual behavior when the plugin is disabled.
The only setting I have changed in my preset is increasing the maximum zoom distance to 40 (2x the game's default of 20).

Previously I turned free cam on and get into Gpose with no problems. But today Gpose stopped to work when free cam is on. When I press Gpose button or use /grouppose command nothing happens. I trired to reinstall the plugin, restart game, reboot PC - nothing changes.

Problem started in the newest updated
L1 + Right joystick Y-axis works to increase/decrease the camera speed, but Y-axis alone doesn't work to adjust the camera angle
Up arrow and Down in the keyboard arrow still works to adjust the camera angle

After today's patch I can't launch the game if Cammy is installed.
I can install it once it's launched though.

When i doing something make height changed such as jumping of flying, the camera height has delay to follow my head.
I know its usable in normal gaming, but when i using with some other plugins to make a immersive first person view, height change will make my camera dive into body.

Add an option to maintain camera distance because everytime my camera zooms in by a collision with something it doesn't return to the position I left it

I really loved this function to tilt the camera for more precise pictures as the slider and editing manually the value really gave a lot of power to precission. Is it possible to bring this function back to cammy?

Thank you for the hard work and amazing plugin.