unifreq / linux-5.4.y Goto Github PK

大佬你好，我看了下你其他几个内核，都对rtl8761b做了支持，5.4.y是遗漏了还是无法支持？如果是遗漏的话，辛苦大佬支持下 :-)

感谢F大为电视盒子开启更多玩法，但如x96max+无线未能驱动实在有点可惜，方便时麻烦测试看看

大致对比一下代码RTL8822CS驱动貌似还与应用平台设置有关，详见如下：
https://github.com/CoreELEC/RTL8822CS-aml
--p-amlogic_9.2.1811_21
--amlogic-5.4.125--也比较新

其中“../rtl88x2cs/Makefile”中，例如CONFIG_PLATFORM_AML_S905 = y

【1】https://github.com/CoreELEC/RTL8822CS-aml/blob/aecc07c6b90bb776bd569159067da5c985c92458/rtl88x2CS/Makefile#L206
###################### Platform Related #######################
CONFIG_PLATFORM_I386_PC = n
CONFIG_PLATFORM_ANDROID_X86 = n
CONFIG_PLATFORM_ANDROID_INTEL_X86 = n
CONFIG_PLATFORM_JB_X86 = n
CONFIG_PLATFORM_ARM_S3C2K4 = n
CONFIG_PLATFORM_ARM_PXA2XX = n
CONFIG_PLATFORM_ARM_S3C6K4 = n
CONFIG_PLATFORM_MIPS_RMI = n
CONFIG_PLATFORM_RTD2880B = n
CONFIG_PLATFORM_MIPS_AR9132 = n
CONFIG_PLATFORM_RTK_DMP = n
CONFIG_PLATFORM_MIPS_PLM = n
CONFIG_PLATFORM_MSTAR389 = n
CONFIG_PLATFORM_MT53XX = n
CONFIG_PLATFORM_ARM_MX51_241H = n
CONFIG_PLATFORM_FS_MX61 = n
CONFIG_PLATFORM_ACTIONS_ATJ227X = n
CONFIG_PLATFORM_TEGRA3_CARDHU = n
CONFIG_PLATFORM_TEGRA4_DALMORE = n
CONFIG_PLATFORM_ARM_TCC8900 = n
CONFIG_PLATFORM_ARM_TCC8920 = n
CONFIG_PLATFORM_ARM_TCC8920_JB42 = n
CONFIG_PLATFORM_ARM_TCC8930_JB42 = n
CONFIG_PLATFORM_ARM_RK2818 = n
CONFIG_PLATFORM_ARM_RK3066 = n
CONFIG_PLATFORM_ARM_RK3188 = n
CONFIG_PLATFORM_ARM_URBETTER = n
CONFIG_PLATFORM_ARM_TI_PANDA = n
CONFIG_PLATFORM_MIPS_JZ4760 = n
CONFIG_PLATFORM_DMP_PHILIPS = n
CONFIG_PLATFORM_MSTAR_TITANIA12 = n
CONFIG_PLATFORM_MSTAR = n
CONFIG_PLATFORM_SZEBOOK = n
CONFIG_PLATFORM_ARM_SUNxI = n
CONFIG_PLATFORM_ARM_SUN6I = n
CONFIG_PLATFORM_ARM_SUN7I = n
CONFIG_PLATFORM_ARM_SUN8I_W3P1 = n
CONFIG_PLATFORM_ARM_SUN8I_W5P1 = n
CONFIG_PLATFORM_ACTIONS_ATM702X = n
CONFIG_PLATFORM_ACTIONS_ATV5201 = n
CONFIG_PLATFORM_ACTIONS_ATM705X = n
CONFIG_PLATFORM_ARM_SUN50IW1P1 = n
CONFIG_PLATFORM_ARM_RTD299X = n
CONFIG_PLATFORM_ARM_LGE = n
CONFIG_PLATFORM_ARM_SPREADTRUM_6820 = n
CONFIG_PLATFORM_ARM_SPREADTRUM_8810 = n
CONFIG_PLATFORM_ARM_WMT = n
CONFIG_PLATFORM_TI_DM365 = n
CONFIG_PLATFORM_MOZART = n
CONFIG_PLATFORM_RTK119X = n
CONFIG_PLATFORM_RTK119X_AM = n
CONFIG_PLATFORM_RTK129X = n
CONFIG_PLATFORM_RTK1319 = n
CONFIG_PLATFORM_RTK390X = n
CONFIG_PLATFORM_NOVATEK_NT72668 = n
CONFIG_PLATFORM_HISILICON = n
CONFIG_PLATFORM_HISILICON_HI3798 = n
CONFIG_PLATFORM_NV_TK1 = n
CONFIG_PLATFORM_NV_TK1_UBUNTU = n
CONFIG_PLATFORM_RTL8197D = n
CONFIG_PLATFORM_AML_S905 = y
CONFIG_PLATFORM_ZTE_ZX296716 = n

【2】https://github.com/unifreq/linux-2.5.4.y/blob/27fab380a16f072efa04d6d60ab42b87600be273/drivers/net/wireless/realtek/rtl88x2cs/Makefile#L199
例如：
CONFIG_PLATFORM_I386_PC = y
...
CONFIG_PLATFORM_AML_S905 = n
etc.

恩山Flippy大佬已解答

我现在在ubuntu x86上编译完内核后，不知道如何生成initrd.img

我查了很多资料，说是必须在目标机器（我是斐讯N1）上来生成initrd.img
所以我必须先在N1上安装一个armbian，再将modules拷贝到N1上，然后再通过update-initramfs或者mkinitramfs生成initrd.img，然后再用mkimage制作uInitrd？

请问我的理解对不对？希望大佬能指点一二，谢谢！

please update wireless driver rtl8189fs especially for kernel 5.4.y & 5.15.y now another update is available

已经通过 Amlogic_s905-kernel，成功编译内核和模块。
通过 this article to extract initrd.img-5.4.170-flippy-68+o file which come from Flippy。
里面有内核模块，是5.4.170的。
因为内核 vermagic 问题，所以需要替换。
请问，不通过update-initramfs和arm64环境，在x86编译主机上（我用的是centos8），如何重新建立initrd.img。
另外，uboot是否对initrd和uimage进行校验？

找slimboxtv内核源码一直没有找到，哭哭