Need help for Screamer PCIe Squirrel card about pcileech-fpga HOT 5 CLOSED

Don't need to buy anything. I followed those steps using the software here

first download link on this page - you can ctrl + f: Xilinx Unified Installer 2022.1: Windows Self Extracting Web Installer

from pcileech-fpga.

Thanks a lot.. jacobhamblin. will try out it.

And one more ask .

First, we need to run Build ,then only can connect squirrel card to the target system right ?

Or any other steps, need to follow before connecting squirrel card into target system. ( My target system OS is -- Windows ,Ubuntu )

As per my understand :

Step 1 --> need to install Xilinx Vivado WebPACK software and run the PCIleech Build steps.
Step 2 -> Once flashed build successfully.Then connect squirrel card into target system.
Step3 --> Check enumeration of squirrel card on target OS (WinOS/Ubuntu)
Step4 --> After confirmed enumeration,Can do attack .

Is this correct or any other step need to follow?

from pcileech-fpga.

While installing "Xilinx Unified Installer 2022.1: Windows Self Extracting Web Installer" we have noticed that, there are many option to select. Can you pls help to confirm which option need to select ?

Picture here :

from pcileech-fpga.

1. no need to flash this device. it comes pre-flashed with pcileech bitstream from the start.
2. if you wish to build anyway please follow instructions and install Xilinx Vivado.

best wishes with this.

from pcileech-fpga.

Sure & big thanks for update.Frisk...

from pcileech-fpga.