PiBox is a web control Interface.
http://wzyy2.github.io/PiBox

See these steps for a build guide(cd Pibox).
Get source from.....
First install the dependencies:

sudo apt-get install python-pip python-dev build-essential  libjsoncpp-dev python-pil
sudo apt-get install python-setuptools
sudo pip install Django==1.6.6
sudo apt-get install scons

Then run building script:

sudo sh ./install_source.sh
sudo sh ./install_env.sh

Start and stop scripts:

sudo sh ./start.sh 
sudo sh ./stop.sh

After run the start script,open your browser and go to the URL:

http://192.168.10.105(your board's ip):8000

(File browser use /home/shares）

uninstall and reinstall： delete the folder and do these steps again.

• File Browser.
• Web ssh.
• yyaw and aria2 control(need aria2 installed).
• host status monitor.
• webcam snapshot.
• GPIO control（uncomplete，and only for raspberry pi).
• more here

PiBox is free software;you can redistribute it and/or modify it under terms of the GNU General Public License version 2 as published by the Free Software Foundation.

If you want more background on how it works,create an issue or email me:-).

• FAQ

写这个PiBox的初衷是现在智能硬件的概念很火,打着家庭网关称号的路由器层出不穷,什么智能家居拉,带摄像头拉,控制家电拉,做小车阿,作者也手痒,于是就着手开始做这么一个web base的嵌入式交互应用(好文绉绉..).

PiBox由两部分组成,分别是c++程序和django的web界面,两者之间通过socket通信,之所以这样做也是为了确保功能的灵活性,c++能实现更多的功能.
如果要扩展应用,可以参考examples-app的写一个程序放到APP文件夹,见example-app的readme.