If not using start_print macro, can that step be safely skipped? about print_area_bed_mesh HOT 4 CLOSED

You can put the bed_mesh_calibrate command in the printer start gcode. Let me know if you need help with the syntax.

from print_area_bed_mesh.

You can put the bed_mesh_calibrate command in the printer start gcode. Let me know if you need help with the syntax.

I need help with the syntax please.

Thanks

from print_area_bed_mesh.

Try this:

PrusaSlicer/SuperSlicer:

BED_MESH_CALIBRATE PRINT_MIN={first_layer_print_min[0]},{first_layer_print_min[1]} PRINT_MAX={first_layer_print_max[0]},{first_layer_print_max[1]}

Cura:

BED_MESH_CALIBRATE PRINT_MIN=%MINX%,%MINY% PRINT_MAX=%MAXX%,%MAXY%

from print_area_bed_mesh.

Thanks it worked!

from print_area_bed_mesh.