tronfu / voron-mods Goto Github PK

Hi,

I watched the YouTube video and got excited about making this project. Ordered the servo motor.

Should there be some other STL files or have I missed something ?

Thanks for sharing your work.

Hello, could you edit the Servo Arm.stl so that the brush is on the right side and the klicky holder is removed? Problem is it doesn't fit with a voron 300. LG BO_Andy

It would be nice, if docklocation_z could be determined automaticly (by using the actual probe-attachment as a second z-endstop). One of the main advantages of klicky-probe is to use it together with klipper_z_calibration, to be able to replace nozzles/printheads without any reconfigurations. I have height-differences of up to 10mm between my printheads - so I would have to reconfigure the docklocation_z instead of z-offset every time.

Any idea why my servo would start oscillating/jittering when extended? It has been working for a few months, so no parameters have been changed.

I ordered the servos in your BOM (Amazon link) and they do not fit the 3d printed parts at all.

I will probably do a mod of this so that I can use the servos I purchased (I've already cut wires). Would you be willing to share the cad files?

Hello, the BOM M5x10 fastener is too long for Trident_housing.stl, the bolt will bottom out into the extrusion and provide no grip. The mount needs to be thickened or shims will need to be added to the BOM. My vote is on thickening the housing. :)

Having issues tightening the servo arm screw
tried m2x6 and m2x8