A CSS grid framework built on SASS to provide an automatic responsive grid for web developers with flexibility for manual control when needed. This grid is a float and padding-based grid, meaning that it works by using floats to create rows and padding to create the gutters between columns instead of margin.

This framework is built based off of config values so any number of columns, gutter sizes, column breakdowns, and breakpoints can be configured and built with ease.

Supports column layouts of 1, 2, 3, 4, 5, 6, 8, 12, and 24 by default.

http://msdotcom.azurewebsites.net/Grid

bower install winjs-grid

First you must have installed Node.js. Then install Grunt CLI as an admin user:

npm install -g grunt-cli

Then in the folder of the repository install the required npm packages:

cd grid
npm install

Or just recompile the Sass files:

grunt

You can launch a static server which watches for changed Sass files and automatically recompiles the changed files:

grunt server

With this server you can access the demo page at this URL: http://localhost:3000/

sass --watch --sourcemap --style compressed css:css

A grid is a container for rows and rows are containers for columns. A grid should never have another grid nested anywhere inside it, only one grid is needed for a section that is using the grid framework.

The grid and row class names can be prefixed with any text you'd like, we default to "ms" but you can use whatever you'd like by setting the SASS grid-prefix variable in the config file. See below.

Grid - .ms-grid

Row - .ms-row

Columns: Auto columns - .col-1-24 where the numbers mean # of columns to span and total # of columns, respectively. Manual columns - .l-col-1-24 same as above but with a viewport/breakpoint size prefix.

Please see the "automagic" and manual column spanning sections below for details on what and how values are supported for the column span number.

###SASS configuration variables Through the use of the variables in the _config.scss file, you can control:

• Number of columns
• The way columns will breakdown by breakpoint (i.e. if a 24 column should become 12 based at some point)
• Maximum width of the grid
• Prefixing of the grid and row classes
• Fixed column margin mode's fixed margins (standard, small, large)
• Mixed langauge support
• Breakpoint values for the 5 built in breakpoints/viewports
• Prefixing of the viewport specific classes (manual colspans and offsets)

$max-grid-width: 1600px;
$fixed-standard: 2px;
$fixed-small-margin: 2px; //4px fixed margin for start of small fixed option which steps up, 4px, 12px, 24px
$fixed-large-margin: 4px; //8px fixed margin for start of large fixed option which steps up, 8px, 24px, 48px
$grid-prefix: "ms-";
$dirMixed: false !default; //Toggle for having mixed langauge support



//Columns supported AND their associated "automatic" rwd column breakdown
//Can be any amount - 1 column doesn't need to be specfied
//Format for key/value pair - columnCount: (vp1col, vp2col, vp3col, vp4col, vp5col)
$columns: (2: (1, 1, 2, 2, 2), 3: (1, 3, 3, 3, 3), 4: (1, 2, 4, 4, 4),
5: (1, 1, 5, 5, 5), 6: (1, 2, 3, 6, 6), 8: (2, 2, 4, 8, 8), 
12: (2, 4, 4, 12, 12), 24: (6, 12, 24, 24, 24));


//Grid breakpoints, different viewport sizes and list for mixin use
$vp1: 320px;
$vp2: 540px;
$vp3: 768px;
$vp4: 1084px;
$vp5: 1400px;
$vp-list: ($vp1, $vp2, $vp3, $vp4, $vp5);



//Different prefixes for each viewport and list for mixin use
$vp1prefix: xs;
$vp2prefix: s;
$vp3prefix: m;
$vp4prefix: l;
$vp5prefix: xl;
$vp-prefix-list: ($vp1prefix, $vp2prefix, $vp3prefix, $vp4prefix, $vp5prefix);

Built into the grid is an opinated take on how the different column layouts should reflow and breakdown across the 5 breakpoints. This works nicely for those that want to get up and running quickly, need their content to look great across many screens, and don't need the granualar control over the breakdown of columns for each breakpoint.

In this "automagic" mode, only certain column spanning values are supported out of the box. For example, if you need a column spanning 7 columns in a 24 column layout, you'll need to use the manual class overrides described below.

Column spanning options that are supported "automagically", these will reflow and respond across the different breakpoints without any manual classes:

Example row:

<section class="ms-row">
    <div class="col-3-4 ">
    </div>
    <div class="col-1-4 ">
    </div>
</section>

Column breakdown across each breakpoint:

Manual column span class overrides are supported for all column counts and all breakpoints. Here is the pattern for the classes:

viewport - col - # of columns to span - total # of columns

Examples:

s-col-3-24 - 12.5% of the viewport - At the small(viewport 2) breakpoint and above, this column will span 3 columns of the 24 columns in the row.

l-col-14-24 - 58.3333333333% of the viewport - At the large(viewport 4) breakpoint and above, this column will span 14 columns of the 24 columns in the row.

The grid can support fluid, fixed, and zero/no gutter options, all of which is configurable. By default the grid uses fluid gutters. If you want to use fixed gutters, you will add one of three helper classes: fixed, fixed-small, or fixed-large. Zero or no gutter uses the helper class zero-margin.

To apply these different gutter options, you place the corresponding helper class on the grid element or an individual row. Place on the grid if you want it to go across that entire grid. Place on an individual row if you'd like to scope the behavior to only that row.

Fluid - this is the default behavior.

fixed - stays at one value across all breakpoints, default is 4px.

fixed-small - starts at 4px, jumps to 12px at viewport 2, and to 24px at viewport 3.

fixed-large - starts at 8px, jumps to 24px at viewport 2, and to 48px at viewport 3.

zero-margin - removes all gutters between columns.

The grid supports two flavors of page margins. None or full width and an option with margin.

The default grid's page margins start at 12px, jump to 24px at vp2, 48px at vp3, and 5% at vp4.

The full class added on the grid element will enabled the no margin experience.

Using these classes will offset a column by a specified amount.

Here is the pattern for the classes: viewport - col - total # of columns - offset - # of columns to offset

Example: l-col-8-offset-2 - This will offset the column by 2 column widths for an 8 column row above the large(viewport 4) breakpoint.

Using these classes will allow you to change the built-in column ordering .

Here is the pattern for the classes: Pull - viewport - col - total #of columns - pull - # of columns to pull over by Push - viewport - col - total #of columns - push - # of columns to push over by

Example: If these classes were used in conjunction on two adjacent columns, it would swap them, their order.

l-col-24-pull-12 - This will pull the column over by 12 column widths for a 24 column row above the large(viewport 4) breakpoint.

l-col-24-push-12 - This will push the column over by 12 column widths for a 24 column row above the large(viewport 4) breakpoint.

Putting the .centered class on a single column will center it in that row.

In browsers that support Flexbox, putting the .vertically-centered or .vc class on a single row will align all items center which will vertically center them. Great for vertically centering text next to images.

In browsers that support Flexbox, putting the .horizontally-centered or .hc class on a single row will align all items center based on a flex direction of column which will horizontally center all of them.

Putting the .nb class on a column will make it hold it's original width across all breakpoints.

Example: An element with the classes of class="col-1-4 nb will always stay at a width of 25%.

The _config file has the variable named $grid-prefix where you can specify any prefixing that you would like added to all the .grid and .row classes. The default is ms-.

Helpers are available to you to hide, show, or make invisible content based on the breakpoints of the grid. Here is an example of the classes output for the default medium breakpoint.

@media screen and (min-width: 768px) {
  .show-m {
    display: block;
    visibility: visible;
  }

  .hide-m {
    display: none;
    visibility: hidden;
  }

  .invisible-m {
    visibility: hidden;
  }
}

There is a scenario where the CSS sibling selector, +, fails for the "automagic" mode. This selector only selects siblings that follow after and not preceding siblings. Because of this scenario, when a smaller column span could be used preceding a larger column span, those preceding columns need to be decorated with a class so that they can be selected. If you don't want to use the jQuery plugin, that is fine, but they will need to be decorated with a preceding class. Or add the small jQuery plugin that runs on load to decorate those classes automatically for you.

The grid has full support for RTL. There are predefined SCSS files and labeled respectively for LTR, RTL, and mixed. Compiliation for direction is controlled by two different config values: $dir (ltr or rtl) and $dirMixed (boolean, false as a default). These variables then drive $left and $right variables throughout the SCSS to change as appropriate.

To enable directional support, you need to apply the dir attribute to the html tag and link the appropriate CSS file. It should look something like the following.

<html dir="rtl"> or <html dir="ltr">

Mixed language support is enabled through the use of a dir attribute override. For example, you could have a default dir tag of ltr on the html tag, but than place the 'dir' attribute again where you needed to support the opposite, say on a row element to override that specific row and make it rtl.

<html dir="ltr">
...
<div class="row" dir="rtl"></div>

Without doing anything, IE8 will show the mobile first view. If that is not acceptable for your project, full IE8 support is supported by adding Respond.js to your project will allow it to behave as it does in modern browsers. Remember that if you're using any HTML5 elements (like section), you'll also want to add the HTML5Shiv. Include this JS in the head of your HTML, putting in the conditional comment below will only serve it to browsers below IE9.

<head>
	...
	...

    <!--[if lt IE 9]>
        <script src="/pathto/html5shiv.js"></script>
        <script src="/pathto/respond.js"></script>
    <![endif]-->
</head>