import rfc6052;

Implements a set of functions for dealing with RFC6052 IPv4-embedded IPv6 addresses in VCL.

Prototype

extract(IP ip)

Return value

The IPv4 address embedded in "ip", or NULL.

Description

Extracts the embedded IPv4 address from "ip" and returns it.

Example

set req.http.X-Forwarded-For = rfc6052.extract(client.ip);

Prototype

is_v4embedded(IP ip)

Return value

Boolean.

Description

Used to check whether or not "ip" is an IPv4-embedded IPv6 or not.

Example

if(rfc6052.is_v4embedded(client.ip)) {
        /* client.ip contains an IPv4-embedded IPv6 address */
}

Prototype

prefix(STRING prefix)

Return value

None.

Description

Sets the RFC6052 translation prefix used. Default: 64:ff9b::/96. Note: Only /96 supported. Do _not_ include the netmask.

Example

# Set the RFC6052 translation prefix to 2001:db8::/96
prefix("2001:db8:64::");

Prototype

replace(IP ip)

Return value

None.

Description

Extracts the embedded IPv4 address from "ip", and uses it to perform an in-place replacement of "ip". No replacement is performed if "ip" didn't contain an IPv4-embedded IPv6 address to begin with.

Example

rfc6052.replace(client.ip);
# client.ip now contains the embedded IPv4 address

The source tree is based on autotools to configure the building, and does also have the necessary bits in place to do functional unit tests using the varnishtest tool.

Building requires the Varnish header files and uses pkg-config to find the necessary paths.

Usage:

./autogen.sh
./configure

If you have installed Varnish to a non-standard directory, call autogen.sh and configure with PKG_CONFIG_PATH pointing to the appropriate path. For rfc6052, when varnishd configure was called with --prefix=$PREFIX, use

PKG_CONFIG_PATH=${PREFIX}/lib/pkgconfig export PKG_CONFIG_PATH

Make targets:

• make - builds the vmod.
• make install - installs your vmod.
• make check - runs the unit tests in src/tests/*.vtc
• make distcheck - run check and prepare a tarball of the vmod.

By default, the vmod configure script installs the built vmod in the same directory as Varnish, determined via pkg-config(1). The vmod installation directory can be overridden by passing the VMOD_DIR variable to configure.

Other files like man-pages and documentation are installed in the locations determined by configure, which inherits its default --prefix setting from Varnish.

In your VCL you could then use this vmod along the following lines:

import rfc6052;

sub vcl_init {
    # Set a custom RFC6052 translation prefix
    rfc6052.prefix("2001:db8:64::");
}

# Method A: Leave client.ip intact
sub vcl_recv {
    if(rfc6052.is_v4embedded(client.ip)) {
        set req.http.X-Forwarded-For = rfc6052.extract(client.ip);
    } else {
        set req.http.X-Forwarded-For = client.ip;
    }
}

# Method B: Replace contents of client.ip
sub vcl_recv {
    rfc6052.replace(client.ip);
    set req.http.X-Forwarded-For = client.ip;
}

• configure: error: Need varnish.m4 -- see README.rst

  Check if PKG_CONFIG_PATH has been set correctly before calling autogen.sh and configure

• Incompatibilities with different Varnish Cache versions

  This VMOD is only tested to work with Varnish Cache 4.1.