Hotkeys only partially register about hitcountermanager HOT 3 CLOSED

For reference: Ticket at deckboard

from hitcountermanager.

Hi, as I don't know the program in detail, this might not be the best solution but it worked for me.

Trying to use the "Keyboard Macro" didn't work for me. Even with Notepad.exe as target and defining just the "L" key, Notepad never wrote the letter "L".

However HCM seems to be working with the "Advanced Keyboard Macro". As there is no target Window that must be set, it seems to simulate the key press system wide. Therefore the HCM registers the key in both modes (synchonous and asynchronous) which is quite nice.
Test was done with CTRL+F11, however, to setup the key correctly I pressed and released CTRL once and pressed and released F11 once to have each key in the list separately. As second step I moved the DOWN entries up and the UP once down which will trigger the "hot key" right in the middle while both keys are down. A delay doesn't seem to be necessary for me but if it not works try a value of 20 ms or better more as, in asynchronous mode, this is the frequency of the HCM checking the keys.

Here is a picture of my setup:

I hope this works on your side, too. Please let me know the results then we can close this issue officially.

Cheers!

from hitcountermanager.

I'm closing this for now. Please reopen or contact me if there are further issues. (Or use the discussion that may still be open at the deckboard project).

from hitcountermanager.