rqlite is a distributed relational database, which uses SQLite as its storage engine. rqlite is written in Go and uses Raft to achieve consensus across all the instances of the SQLite databases. rqlite ensures that every change made to the system is made to a quorum of SQLite databases, or none at all. It also gracefully handles leader elections, and tolerates failures of machines, including the leader.
rqlite gives you the functionality of a rock solid, fault-tolerant, replicated relational database, but with very easy installation, deployment, and operation. With it you've got a lightweight and reliable distributed store for relational data. Think etcd or Consul, but with relational data modelling also available.
You could use rqlite as part of a larger system, as a central store for some critical relational data, without having to run a heavier solution like MySQL.
- Very easy deployment, with no need to separately install SQLite.
- Fully replicated production-grade SQL database.
- An easy-to-use HTTP(S) API, including leader-redirection and bulk-update support. A CLI is also available.
- Basic auth security and user-level permissions.
- Read consistency levels.
- Transaction support.
- Hot backups.
The quickest way to get running on OSX and Linux is to download a pre-built release binary. You can find these binaries on the Github releases page. Once installed, you can start a single rqlite node like so:
rqlited ~/node.1
This single node automatically becomes the leader. You can pass -h
to rqlited
to list all configuration options.
If you want to build rqlite, either because you want the latest code or a pre-built binary for platform is not available, take a look at the contributing guidelines.
While not strictly necessary to run rqlite, running multiple nodes means the SQLite database is replicated. Start a second and third node (so a majority can still form in the event of a single node failure) like so:
rqlited -http localhost:4003 -raft localhost:4004 -join http://localhost:4001 ~/node.2
rqlited -http localhost:4005 -raft localhost:4006 -join http://localhost:4001 ~/node.3
This demonstration shows all 3 nodes running on the same host. In reality you wouldn't do this, and then you wouldn't need to set -http
and -raft
.
Under each node will be an SQLite database, which should remain in consensus. You can create clusters of any size, but clusters of 3, 5, and 7 nodes are most practical. Clusters larger than this become impractical, due to the number of nodes that must be contacted before a change can take place.
When restarting a node, there is no further need to pass -join
. It will be ignored if a node is already a member of a cluster. For more information on managing clusters check this documentation.
rqlite exposes an HTTP API allowing the database to be modified such that the changes are replicated. Queries are also executed using the HTTP API. Modifications go through the Raft log, ensuring only changes committed by a quorum of rqlite nodes are actually executed against the SQLite database. Queries do not necessarily go through the Raft log, however, since they do not change the state of the database, and therefore do not need to be captured in the log. More on this later.
rqlite comes with a CLI but the following examples use the HTTP API directly.
To write data successfully to the database, you must create at least 1 table. To do this perform a HTTP POST, with a CREATE TABLE
SQL command encapsulated in a JSON array, in the body of the request. An example via curl:
curl -XPOST 'localhost:4001/db/execute?pretty&timings' -H "Content-Type: application/json" -d '[
"CREATE TABLE foo (id integer not null primary key, name text)"
]'
To insert an entry into the database, execute a second SQL command:
curl -XPOST 'localhost:4001/db/execute?pretty&timings' -H "Content-Type: application/json" -d '[
"INSERT INTO foo(name) VALUES(\"fiona\")"
]'
The response is of the form:
{
"results": [
{
"last_insert_id": 1,
"rows_affected": 1,
"time": 0.00886
}
],
"time": 0.0152
}
The use of the URL param pretty
is optional, and results in pretty-printed JSON responses. Time is measured in seconds. If you do not want timings, do not pass timings
as a URL parameter.
Bulk updates are supported. To execute multipe statements in one HTTP call, simply include the statements in the JSON array:
curl -XPOST 'localhost:4001/db/execute?pretty&timings' -H "Content-Type: application/json" -d "[
\"INSERT INTO foo(name) VALUES('fiona')\",
\"INSERT INTO foo(name) VALUES('sinead')\"
]"
The response is of the form:
{
"results": [
{
"last_insert_id": 1,
"rows_affected": 1,
"time": 0.00759015
},
{
"last_insert_id": 2,
"rows_affected": 1,
"time": 0.00669015
}
],
"time": 0.869015
}
A bulk update is contained within a single Raft log entry, so the network round-trips between nodes in the cluster are amortized over the bulk update. This should result in better throughput, if it is possible to use this kind of update.
Querying data is easy. The most important thing to know is that, by default, queries must go through the leader node. More on this later.
For a single query simply perform a HTTP GET, setting the query statement as the query parameter q
:
curl -G 'localhost:4001/db/query?pretty&timings' --data-urlencode 'q=SELECT * FROM foo'
The response is of the form:
{
"results": [
{
"columns": [
"id",
"name"
],
"types": [
"integer",
"text"
],
"values": [
[
1,
"fiona"
],
[
2,
"sinead"
]
],
"time": 0.0150043
}
],
"time": 0.0220043
}
The behaviour of rqlite when more than 1 query is passed via q
is undefined. If you want to execute more than one query per HTTP request, perform a POST, and place the queries in the body of the request as a JSON array. For example:
curl -XPOST 'localhost:4001/db/query?pretty' -H "Content-Type: application/json" -d '[
"SELECT * FROM foo",
"SELECT * FROM bar"
]'
You can learn all about the read consistency guarantees supported by rqlite here.
Technically this is not supported, but you can directly read the SQLite under any node at anytime, assuming you run in "on-disk" mode. However there is no guarantee that the SQLite file reflects all the changes that have taken place on the cluster unless you are sure host node itself has received and applied all changes.
Transactions are supported. To execute statements within a transaction, add transaction
to the URL. An example of the above operation executed within a transaction is shown below.
curl -XPOST 'localhost:4001/db/execute?pretty&transaction' -H "Content-Type: application/json" -d "[
\"INSERT INTO foo(name) VALUES('fiona')\",
\"INSERT INTO foo(name) VALUES('sinead')\"
]"
When a transaction takes place either both statements will succeed, or neither. Performance is much, much better if multiple SQL INSERTs or UPDATEs are executed via a transaction. Note that processing of the request ceases the moment any single query results in an error.
The behaviour of rqlite when using BEGIN
, COMMIT
, or ROLLBACK
to control transactions is not defined. It is important to control transactions only through the query parameters shown above.
If an error occurs while processing a statement, it will be marked as such in the response. For example.
curl -XPOST 'localhost:4001/db/execute?pretty&timings' -H "Content-Type: application/json" -d "[
\"INSERT INTO nonsense\"
]"
{
"results": [
{
"error": "near \"nonsense\": syntax error"
}
],
"time": 2.478862
}
rqlite replicates SQLite for fault-tolerance. It does not replicate it for performance. In fact performance is reduced somewhat due to the network round-trips.
Depending on your machine, individual INSERT performance could be anything from 1 operation per second to more than 100 operations per second. However, by using transactions, throughput will increase significantly, often by 2 orders of magnitude. This speed-up is due to the way SQLite works. So for high throughput, execute as many operations as possible within a single transaction.
By default rqlite uses an in-memory SQLite database to maximise performance. In this mode no actual SQLite file is created and the entire database is stored in memory. If you wish rqlite to use an actual file-based SQLite database, pass -ondisk
to rqlite on start-up.
No.
Since the Raft log is the authoritative store for all data, and it is written to disk, an in-memory database can be fully recreated on start-up. Using an in-memory database does not put your data at risk.
- Only SQL statements that are deterministic are safe to use with rqlite, because statements are committed to the Raft log before they are sent to each node. For example, the following statement could result in different SQLite databases under each node:
INSERT INTO foo (n) VALUES(random());
- In case it isn't obvious, rqlite does not replicate any changes made directly to any underlying SQLite files, when run in "on disk" mode. If you do change these files directly, you will cause rqlite to fail. Only modify the database via the HTTP API.
- SQLite commands such as
.schema
are not handled.
You can learn how check status and diagnostics here.
Learn how to backup your rqlite cluster here.
You can learn about securing access, and restricting users' access, to rqlite here.
How do I pronounce rqlite? For what it's worth I pronounce it "ree-qwell-lite".