tkuebler / 3dwifisend Goto Github PK

Hi,
first of all thank you for spending your time in putting this together. I just got the QIDI X-Max and was really disappointed that the software would not just connect via Ethernet.
I found your script and it seems to be able to compress the file as well as connect to the printer. The issue is that it can't write onto the USB stick. Here is the creation of the compressed code and the error code:

input file:.\gear.gcode file:gear.gcode dir:.
open input file .\gear.gcode ok
open output file .\gear.gcode.tz ok
convert done!
X_min:5.000000 X_max:163.324005 Y_min:111.676003 Y_max:138.324005!

INFO:main:3D Printer Xmax IP address: 192.168.5.244
INFO:main:Start write to SD: M28 .\gear.gcode.tz
INFO:main:Start write to SD result: Error!Cann't create file .\gear.gcode.tz
INFO:main:File Position: 0
INFO:main:Sending File Chunk result: ok

Is there any requirement for the USB stick? I have tried the original one and a clean FAT32 formatted one. Do you have any other idea what could go wrong here?

Thanks!

I see in the code that you already have a TODO for this, but I really wish there was file error checking implemented. Around 1/4 of the time with the stock QIDI Print software, even over Ethernet, I get incomplete files and only find out when it tells me "Invalid GCode" hours into the print. I'd be willing to pay a decent amount of money if you're able to implement this or have any insight. Support wasn't very helpful. Thanks.

Hi and happy new year.
Impossible for me to upload file to printer...
Got an idea?

`C:\quidi>c:\quidi\3DWSF.py 192.168.1.42 Body1.gcode yes
INFO:main:Printer Info

INFO:main:board/firmware info: Error:Wifi reboot,please reconnect!

INFO:main:firmware version: Error:Wifi reboot,please reconnect!

INFO:main:File 1: Body1.gcodeFile 2: Body1.gcode.tz
INFO:main:Compressing Gcode File`