Copyright (c) 2017-2023 Antmicro

This project contains open hardware design files for a camera board supporting two OV5640 image sensors from OmniVision. These RGB sensors provide a rolling shutter and offer a resolution of 5MP (2591x1944). The design files for this project are provided and maintained in KiCad.

The main directory contains the KiCad design files, LICENSE and README. The remaining files are stored in the following directories:

• img - contains graphics for this README
• doc - contains generated schematics and other documentation
• lib - contains KiCad component library

• Two OV5640 image sensors placed on a PCB
• Fastening holes spaced by 20mm for a standard S-mount lens holder
• Each sensor is accessible through an independent 2-lane MIPI CSI-2 interface
• Separate I2C buses for sensor configuration
• Unified, 50-pin FFC interface
• On-board clock generator for driving the image sensors

The OV5640 Dual Camera board is electrically compatible with a variety of processing platforms created by Antmicro. Below is a list of a few selected ones:

• Jetson Nano Baseboard supporting NVIDIA Jetson Nano, Jetson TX2 NX, Jetson Xavier NX System on Modules
• Jetson Orin Baseboard supporting NVIDIA Jetson Orin NX, Jetson Orin Nano
• Kria K26 Devboard supporting AMD-Xilinx KRIA K26 System on Module
• Google Coral Baseboard supporting Google Coral System on Module
• Snapdragon 845 Baseboard based on Quectel SA800 SoM with Qualcomm Snapdragon 845 Mobile Platform
• Snapdragon 625 Baseboard based on Quectel SC606T SoM with Qualcomm Snapdragon 625 Mobile Platform

This project is licensed under the Apache-2.0 license.