thune-xiaobai / android_device_xiaomi_sagit Goto Github PK

Setting:

• Celluler data: Card2
• Calls: Card1
• SMS messages: Card1

Reboot devices.
Expect: SIM card setting as same as before.
Actually: SIM card setting reset to default( All settings set to Card1).

PS: Also test after turn on and turn off Airplane mode, the SIM card setting no changed.

Unable to start USB Tethering.

更新了好多个版本了，NFC功能始终无法使用。

不能边用WiFi边开热点

1. 长时间锁屏后解锁很慢，按指纹解锁有振动感，屏幕不亮，多次按电源键后能亮屏
2. 偶尔会出现解锁之后屏幕颜色不对，过渡曝光的感觉，锁屏后重新解锁正常
3. 刷入完整的google apps之后，相机不能使用录制视频功能
4. （不知道算不算bug）支付宝无法使用指纹支付
5. 有新通知时，指示灯闪动频率过快，抽风似的，调到最慢还是超快

最后，感谢你的移植成果~ 虽然不能指纹支付了，但是还是原生好啊

xiaobai,
could you double check your repo.
cannot compile, I have still bug in the end of compilation

Creating filesystem with parameters:
Size: 872415232
Block size: 4096
Blocks per group: 32768
Inodes per group: 7616
Inode size: 256
Journal blocks: 3328
Label: vendor
Blocks: 212992
Block groups: 7
Reserved block group size: 55
Created filesystem with 614/53312 inodes and 15889/212992 blocks
/out/lineage/target/product/sagit/vendor.img maxsize=890486784 blocksize=270336 total=52712948 reserve=9191424
[ 99% 97658/97663] build /out/lineage/target/product/sagit/obj/NOTICE.html
Combining NOTICE files into text
Combining NOTICE files into HTML
[ 99% 97661/97663] Package target files: /out/li...arget_files_intermediates/lineage_sagit-target_files-4185d5e773.zip
FAILED: /out/lineage/target/product/sagit/obj/PACKAGING/target_files_intermediates/lineage_sagit-target_files-4185d5e773.zip

Non-symlink /out/lineage/target/product/sagit/system/vendor detected!
You cannot install files to /out/lineage/target/product/sagit/system/vendor while building a separate vendor.img!
ninja: build stopped: subcommand failed.
20:48:36 ninja failed with: exit status 1

failed to build some targets (44:32 (mm:ss))

我有一张联通卡和电信卡。

每次开机都是默认**联通，两张卡换过位置问题仍然如此。

请问下大佬是在准备制作rec吗，我手上有mi 6，可以帮忙测试。

kindly fix the volte please

Why camera not running on daemon?
https://github.com/thune-xiaobai/android_device_xiaomi_sagit/blob/cm-14.1/rootdir/root/init.target.rc

1. Flash China Dev 7.6.29 via fastboot
2. Flash TWRP
3. Wipe Data
4. Flash Lineageos-0702 and OpenGapps

Expect: The MAC address as same as MIUI.
Real: Random MAC address, change at reboot every time

The defaule camera of LineageOS "Snap" use the 2x camera as default.
Could it use the normal camera instead of the 2x camera as default?
Or is there any button to swap the dual camera?

With the new config of seLinux enforcing the ir blaster does not work at all, this can be fixed by changing to Permissive.
Lookintg at the Dmesg output with Permissive(tollerant) seLinux i get this warning even though its working now
[171.449886] type=1400 audit(1508343558.403:59): avc: denied { read write } for pid=3217 comm="Binder:1624_C" name="peel_ir" dev="tmpfs" ino=23049 scontext=u:r:system_server:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=0

I suggest to finetune the sePolicy some more.
Maybe this link can help: http://searchmobilecomputing.techtarget.com/tip/How-to-manage-and-modify-SE-Android

Connection is coming
but there is no sound

In MUI, could create a Hotspot and connect to WIFI at the same time.
But this rom couldn't.

The WIFI signal is poor than MIUI's.
Maybe the 2x2 MIMO Wifi cause the problem？

does not connect codec aptx ....
works in mode sbc.

Camera doesn't work in any application with the OSS kernel. I'm using your kernel fork to compile, and have tried both 7.9.14 China Dev and 7.9.22 Global Dev firmwares.

Logcats below:
Snap camera crash - https://pastebin.com/raw/RGEVYV30
Google camera crash - https://pastebin.com/raw/EWbzBpNg

Hi,

I'm having a build issue when attempting to build this device tree using a prebuilt kernel.
ninja: error: '/home/daniel/android/lineage/out/target/product/sagit/obj/KERNEL_OBJ/usr', needed by '/home/daniel/android/lineage/out/target/product/sagit/obj/SHARED_LIBRARIES/libbt-vendor_intermediates/src/bt_vendor_persist.o', missing and no known rule to make it

Disabling bluetooth only changes the error to ALSA related. I have 2 Mi 6's and are happy to test any solutions.
If you have a custom manifest.xml for the msm8998 kernel and audio related libraries could you also share it?

Thanks,
Daniel

Notification Light setting:

• Paulse Length: Very long
• Paulse Speed: Very slow

Expect: The paulse Notification Light looks like very slow and long paulse.
Actually: The paulse very very fast.