thinhx2 Goto Github PK

stc89c52

L1:STC 8051 MCU (STC89C52)

stc89c52-mcu-control-stepper-motor

It's about the way how use the 52 mcu to control the stepper motor

stc89c52_digital_clock

STC89C52 Course Experiment: Using a ds1302 component to implement a digital clock

stc89c52rc-clock

stc_diyclock

STC DIY Clock redux (STC15F204EA, STC15W404AS, STC15W408AS)

stc_diyclock-ntp

STC DIY Clock Kit firmware + NTP Time sync on ESP8622

stc_diyclock_gps

STC15F204EA DIY Clock redux with GPS-Sync

stc_led_clock_8k

Firmware for LED clock kits based on the STC 8051 microcontroller family, using parts with 8K of flash.

stlink-bootloaders

Stlink Bootloaders

stlink-firmware

stm32f030-vusb

Use gpio to emulate usb low-speed on stm32f030f4p6.Use internal rc instead of crystal.

stm32f030f4p6

dành cho ai muốn code trên arduino

stm32f030k6

Custom board for the STM32F30K6T6 MCU, compatible with STM32Duino (Arduino).

stm32f030rct6_bl

stm32f411ceu6-blackpill-micropython-examples

Some MicroPython examples for WeAct v3.0 STM32F411CEU6, but of course applicable to MicroPython on any board.

stm8-vusb

Low-speed USB implemented on STM8 microcontrollers

stm8_usb_keyboard

STM8S103F3P6

sylvania-led-firmware

Custom firmware for the ATtiny13 inside of a commercial color changing bulb

t13-thermometer

ATTiny13 LM35 SSD1306 Thermometer

t85-bootloader

teach-tiny13

Simple teaching using a barebone attiny13

temperaturemeasuring

Measure Temperature with ATtiny13

thermo-hygrometer

Thermo-Hygrometer based on DHT22, ATtiny13 and HD44780 kompatible display

thermometer-attiny13-nokialcd

Low power digital thermometer on ATTINY13+LM35(TMP36) and Nokia 5110 LCD module. Works more than month on single 2xAA battery pack

thermometer-dht11-tm1637

Digital thermometer & humidity meter based on : ATTINY13, DHT11 sensor, TM1637 LED 4 digit display

thermometer-ds18b20

Graduation Thesis by DS18B20 and STC 8051 MCU

thermometer-lm35-attiny13-tm1637-negative-temperatures

igital LED thermometer on ATTINY13 and TM1637 4-digit LED Arduino module. Uses analog temperature sensor LM35 (for -50C - 100C degrees) with pullup diode 1N4007 to enable negative temperature measurements

thermometer-lm35-tm1637

Digital LED thermometer on ATTINY13 / LM35 and 4-digit TM1637 module for Arduino. Uses LM35 analog themperature sensor (0-100C degrees).

thermometer-tm1637

Digital LED thermometer on ATTINY13 and 4-digit TM1637 module for Arduino. Uses TMP36 analog themperature sensor (0-100C degrees) or TMP36 (-50 +100C).

thinhx2

Config files for my GitHub profile.