Open Source Embedded Design
Loughborough University Finalist (Product Design & Technology BSc Hons. Final Year Project)
Product Design, Embedded Design, OpenSource, Sustianability, Education
- INPUT (AC): 100-240V - 50/60Hz 0.5A MAX
- OUTPUT (DC): 5.0V 2.0A
- Powered by (x2) Dupont Jumper Cables
- +5V to +5V Display Module
- GND to GND Display Module
Powered by AC Adapter (mini USB)
- Connection 1: 15 Pin Ribbon Cable
- DSI to RPi DSI
- Connection 2: Dupont Jumper cables (x2)
- +5V - +5V RPi GPIO
- INT - N/A
- SDA - N/A
- SCL - N/A
- GND - GND on RPi GPIO
**(INT, SDA, SCL are not required when using 15 Pin DSI connection)
- Attached to Raspberry Pi 3 Model B 40 GPIO pins
- 120 Pin Headers
- Connected with 15 Pin Ribbon Cable
- Camera Module CSI to RPi CSI
- Connected with Dupont Jumper Cables
- Vin - 3.3V RPi GPIO
- 3Vo - N/A
- GND - GND RPi GPIO
- DO - IO16 RPi GPIO
- CS - IO20 RPi GPIO
- CLK - IO21 RPi GPIO
** Connected to K Type Thermocouple Type-K (Glass Braid Insulated)
Red (-) & Yellow (+) connection
- Connected with Dupont Jumper Cables
- Vin - 3.3V RPi GPIO
- 3Vo - N/A
- GND - GND RPi GPIO
- DO - IO18 RPi GPIO
- CS - IO24 RPi GPIO
- CLK - IO25 RPi GPIO
** Connected to K Type Thermocouple Type-K (Glass Braid Insulated)
Red (-) & Yellow (+) connection
David Hakkens (Shredder & Extruder designs & Precious Plastics Community) - https://davehakkens.nl/tag/preciousplastic
Matt Richardson (mrichardson23) - https://github.com/mrichardson23/rpi-kivy-screen
Tony DiCola (tdicola) - https://github.com/adafruit/Adafruit_Python_MAX31855
Raspberry Pi Community - https://www.raspberrypi.org/community/