Continuous Reported Status - Zone Restored 9 about dsckeybusinterface HOT 3 CLOSED

I've updated the Status example to handle the zone change flags, let's see if this resolves the issue.

from dsckeybusinterface.

Issue resolved, thanks for the update!
Now the Zone 9 returns to restored only one time.

Log_PowerSerie832_PC5015-ContinuesRestoredZone-9_KeybusReader_OK.txt
Log_PowerSerie832_PC5015-ContinuousRestoredZone-9_Status_OK.txt

from dsckeybusinterface.

Looks good! Thanks for the followup.

Side note: at first, I thought your keypad had a keypad zone assigned and was triggering the 0x28 query messages - but after you mentioned you had the zone expander, it's clearly the expander.

I'll add that to the list of needed data - with data from a couple more zones configured and opened/closed on the expander it should be possible to turn the Arduino/esp8266 into a zone expander (emulating other modules should be possible as well).

from dsckeybusinterface.