staz0t / hashcatch Goto Github PK

I have read all other reports and solutions to this problem but I still get the problem. Might be because I dont understand the solutions. Can you help me out, thanks

After trying to install using .deb file i get an error saying:
dpkg: error processing archive /home/pi/hashcatchi/hashcatch_1.2_any.deb (--unpack): package architecture (any) does not match system (armhf)
Im trying to use the .deb file because even if i make hashcat-utils nothing shows up in /bin or hashcat-utils/bin

Link on readme is to aircrack not hashcatch

package architecture (any) does not match system (amd64)
Not install-able

Hey so while running hashcatch on raspbian, on my raspberry pi zero W it can never connect the wifi device to monitor mode,

doing the command
"iw list"
shows the supported interfaces of the pi's wifi card
monitor mode doesn't show up
available ones are:
IBSS
MANAGED
AP
P2P-CLIENT
P2P-GO
PDP-DEVICE
is there a way to fix?

Hi guys, I am running into an issue getting hashcatch to run. all prerequisites are installed.

This is screen I am getting:

[] Starting hashcatch setup
ls: cannot access '/usr/share/hashcatch/handshakes/': No such file or directory
[] Enter your wireless interface: wlan1
[] Trying to set the given interface to monitor mode
[+] The adapter is working in monitor mode!
./hashcatch: line 88: /etc/hashcatch/hashcatch.conf: No such file or directory
[] All necessary packages are found installed
[*] Done

Please help.
Running on 4.19.0-kali4-amd64

Thanks!

Hi,
im trying to install hashcatch via cloning the git repo and "./hashcatch --setup" on Kali (Linux kali 5.6.0-kali1-amd64 #1 SMP Debian 5.6.7-1kali1 (2020-05-12) x86_64 GNU/Linux).
My card is an Alfa AWUS051NH which supports monitor mode but the setup checkup fails:
phy2 wlan0 rt2800usb Ralink Technology, Corp. RT3572

[*] Enter your wireless interface: wlan0
[*] Trying to set the given interface to monitor mode
[-] Could not set the given wireless adapter to monitor mode!
[-] Enter another wireless interface to try again:

after that check, the card is in monitor mode:

root@kali:/home/kali/Desktop# iwconfig

wlan0     IEEE 802.11  Mode:Monitor  Frequency:2.412 GHz  Tx-Power=20 dBm   
          Retry short  long limit:2   RTS thr:off   Fragment thr:off
          Power Management:off

deactivating the monitor mode via airmon-ng brings up following message:

root@kali:/home/kali/Desktop# airmon-ng stop wlan0

PHY     Interface       Driver          Chipset

phy2    wlan0           rt2800usb       Ralink Technology, Corp. RT3572

You already have a wlan0 device but it is NOT in station mode.
Whatever you did, don't do it again.
Please run "iw wlan0 del" before attempting to continue

Feels like the setup check is doing something no "ok"?

I am trying to setup hashcatch to run on my kali linux, followed the steps as instructed. Hashcatch recognizes my network adapter and successfully puts it into monitor mode. At the next step setup quits, because its missing hashcat-utils. I've been searching for a fix, but can't figure out how to make it to install.

What I've tried
changing the $PATH variable - i added both /usr/lib/hashcat-utils/ and usr/share/hashcat-utils folders, which later i found out are the same. Tried to change $path only on current shell and then also tried to change the .bashrc file. I also tested if the paths are properly added with echo $PATH, both folders always appear even after reboot.
I have all other dependecies which are aircrack-ng, hcxtools and jq, which i check with command -v <command_name>
I've also tried putting the ~/lib/hashcat-utils/ folder into /usr/bin/
I can't figure it out please help me

after fixing the problem with hashcat-utils not found,
[] Starting hashcatch setup
ls: cannot access '/usr/share/hashcatch/handshakes/': No such file or directory
[] Enter your wireless interface: wlan0
[] Trying to set the given interface to monitor mode
[+] The adapter is working in monitor mode!
./hashcatch: line 88: /etc/hashcatch/hashcatch.conf: No such file or directory
[] All necessary packages are found installed
[*] Done

It looks succesful but when trying to start hashcatch, it says command not found, like its not installed.

I am running Kali Linux 2021.4a freshly installed :

uname -a

Linux kali 5.14.0-kali4-amd64 #1 SMP Debian 5.14.16-1kali1 (2021-11-05) x86_64 GNU/Linux

I installed all prerequisites :

sudo apt install aircrack-ng hashcat-utils hcxtools jq

Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
aircrack-ng is already the newest version (1:1.6+git20210130.91820bc-2).
hashcat-utils is already the newest version (1.9-0kali2).
hcxtools is already the newest version (6.2.5-2).
jq is already the newest version (1.6-2.1).
0 upgraded, 0 newly installed, 0 to remove and 745 not upgraded.

When I try to install hashcatch, I have an error :

udo ./hashcatch --setup

 __   __  _______  _______  __   __  _______  _______  _______  _______  __   __                                    
|  | |  ||   _   ||       ||  | |  ||       ||   _   ||       ||       ||  | |  |                                   
|  |_|  ||  |_|  ||  _____||  |_|  ||       ||  |_|  ||_     _||       ||  |_|  |                                   
|       ||       || |_____ |       ||       ||       |  |   |  |       ||       |                                   
|       ||       ||_____  ||       ||      _||       |  |   |  |      _||       |                                   
|   _   ||   _   | _____| ||   _   ||     |_ |   _   |  |   |  |     |_ |   _   |                                   
|__| |__||__| |__||_______||__| |__||_______||__| |__|  |___|  |_______||__| |__|                                   
                                                                                                                    
[*] Starting hashcatch setup                                                                                        
[*] Enter your wireless interface: wlan0 
[*] Trying to set the given interface to monitor mode
[+] The adapter is working in monitor mode!
[!] The following packages are missing. Please ensure that you have installed them properly before starting hashcatch                                                                                                                   
        hashcat-utils
[*] Done

How can I fix the problem ?

I'm running kali on a raspberry pi zero w with nexmon patch. When I run the setup of hashcatch. It says hashcat-utils dependency is missing. But I can't find hashcat-utils in the repository. Any help with the issue please?

The official description is:

"[...] so that you can capture handshakes while walking your dog."

I have the tool, now I want a dog.

Please be professional and remove those kinds of comments.

hello after interface grep you can add this lines

mode=$(iwconfig wlan0 | head -n 1 | awk -F" " '{print $4}' | awk -F":" '{print $2}')
if [ "$mode" != "Monitor" ]; then
echo "Start mode monitor on [$interface]"
airmon-ng check kill
airmon-ng start $interface
else
echo "Mode Monitor enable"
fi

to check mode monitor

@staz0t
If the network has wps enabled .. It would give you a lot of info.like router model number and serial number and if it's pbc or pin .

And an idea for another project is a user agent collector
it's just a mix of karma attack and a web server to catch the user agent and the ap that it came from with both bssids and maybe deauth would be useful in that part
just like this
Img
I think it can be done without a webserver as the APS send the user agent in the background... And of course store that info in a db

On my Kali for Raspberry Pi Zero W I got:
[!] The following packages are missing. Please ensure that you have installed them properly before starting hashcatch
hashcat-utils

Where are no hashcat-utils in Kali repository, so I downloaded and compiled hashcat-utils and run hashcatch again - same message.
How to show hashcatch path to my folder /root/hashcat-utils/bin/ ?

hello

cap2hccapx is deprecated and not present in hxtools
use hcxpcaptool instead

Hello! In the string:
cap2hccapx "/tmp/hc_captures/$bssid-01.cap" "/tmp/hc_handshakes/$bssid.hccapx" &> /dev/null
the script checks the *-01.cap file permanently. Even if there are new captures, the script will test only the first one. So it makes impossible to catch a handshake if in the first capture it is absent.

So to fix it, we should replace the string with something like:
cap2hccapx "`ls /tmp/hc_captures/$bssid-*.cap | tail -n 1`" "/tmp/hc_handshakes/$bssid.hccapx" &> /dev/null

Or instead to add
rm "/tmp/hc_captures/$bssid-01.cap"
just after
rm "/tmp/hc_handshakes/$bssid.hccapx" &> /dev/null

[!] The following packages are missing. Please ensure that you have installed them properly before starting hashcatch
hcxtools

But i have it installed

I'm currently facing the issue that my Raspberry Pi won't setup because it tells me to install hashcat-utils. But how to install that the proper way for hashcatch and Raspberry Pi?

[!] The following packages are missing. Please ensure that you have installed them properly before starting hashcatch - hashcat-utils

I tried to download hashcat from GitHub and compiled it manually (sudo make && sudo make install). That install hashcat for me. But it seems like Hashcatch does not like this way?

Any help please?

hello

try crack handshack on OPN wifi is usless.
you can add filter

timeout --foreground 3 airodump-ng "$interface" -t wpa -w /tmp/hc_out --output-format csv &> /dev/null

Hello,

When I run sudo ./hashcatch --setup I have this error:

[+] The adapter is working in monitor mode!
./hashcatch: line 88: /etc/hashcatch/hashcatch.conf: The file or directory does not exist
[!] The following packages are missing. Please ensure that you have installed them properly before starting hashcatch
        hashcat-utils

But I have installed this package.

Can anyone help me.

A greeting and thanks

simply run
sudo bash hashcatch

"[-] Could not set the given wireless adapter to monitor mode!"

All of the pre-requisite software runs fine in macOS so it seems ( I could be wrong ) that macOS support should be possible. I look forward to future updates. Thanks for all the hard work.

Using macOS version 10.14.6 (18G87).

I'm on kali. What is the problem?

Hashcatch will not recognize hashcat-utils. Please help with any suggestions.

I have been trying to use this tool for a little wondering why cap2hccapx wont work. And the reason is the way I installed and prob many other people installed hashcat-utils the file ends in .bin so cap2hccapx.bin works not cap2hccapx so in the code its self just replace cap2hccapx with cap2hccapx.bin

Please add support for external GPS devices to track location so it can be tracked without requiring internet access. That would be a huge benefit to this project. Requiring internet access for this just provides dangerous metadata about what your doing.

hello

It coul'd be cool to have pmkid crack support

https://online-it.nu/how-to-attack-wpa-wpa2-pmkid-kali-linux-2018-4/