docker image to run Samba or AFP (netatalk) to provide a compatible Time Machine for MacOS

The following tags have multi-arch support for amd64, armv7l, and arm64 and will automatically pull the correct tag based on your system's architecture:

latest, smb

Note: The afp tag has been deprecated in terms of new feature updates and is only available for amd64.

The smb tags also have unique manifests that are generated daily. These are in the format smb-YYYYMMDD (e.g. - smb-20210730) and can be viewed on Docker Hub. Each one of these tags will be generated daily and is essentially a point in time snapshot of the smb tag's manifest that you can pin to if you wish. Please note that these tags will remain available on Docker Hub for 6 months and will not receive security fixes. You will need to update to newer tags as they are published in order to get updated images. If you do not care about specific image digests to pin to, I would suggest just using the smb tag.

These tags will explicitly pull the image for the listed architecture and are bit for bit identical to the multi-arch tags images.

• latest-smb-amd64, smb-amd64 - SMB image based off of alpine:latest
• afp, afp-amd64 - AFP image based off of debian:jessie
  • Deprecated but still available; not being regularly built - This image may have unpatched security vulnerabilities

• latest-smb-armv7l, smb-armv7l - SMB image based off of alpine:latest for the armv7l architecture

• latest-smb-arm64, smb-arm64 - SMB image based off of alpine:latest for the arm64 architecture

Warning: I would strongly suggest migrating to the SMB image as AFP is being deprecated by Apple and I've found it to be much more stable. I do not plan on adding any new features to the AFP based config and I switched the default image in the latest tag to the SMB variant on October 15, 2020.

To pull this image: docker pull mbentley/timemachine:smb

Example usage with --net=host to allow Avahi discovery; all available environment variables set to their default values:

docker run -d --restart=always \
  --name timemachine \
  --net=host \
  -e ADVERTISED_HOSTNAME="" \
  -e CUSTOM_SMB_CONF="false" \
  -e CUSTOM_USER="false" \
  -e DEBUG_LEVEL="1" \
  -e MIMIC_MODEL="TimeCapsule8,119" \
  -e EXTERNAL_CONF="" \
  -e HIDE_SHARES="no" \
  -e TM_USERNAME="timemachine" \
  -e TM_GROUPNAME="timemachine" \
  -e TM_UID="1000" \
  -e TM_GID="1000" \
  -e PASSWORD="timemachine" \
  -e SET_PERMISSIONS="false" \
  -e SHARE_NAME="TimeMachine" \
  -e SMB_INHERIT_PERMISSIONS="no" \
  -e SMB_NFS_ACES="yes" \
  -e SMB_METADATA="stream" \
  -e SMB_PORT="445" \
  -e SMB_VFS_OBJECTS="acl_xattr fruit streams_xattr" \
  -e VOLUME_SIZE_LIMIT="0" \
  -e WORKGROUP="WORKGROUP" \
  -v /path/on/host/to/backup/to/for/timemachine:/opt/timemachine \
  -v timemachine-var-lib-samba:/var/lib/samba \
  -v timemachine-var-cache-samba:/var/cache/samba \
  -v timemachine-run-samba:/run/samba \
  mbentley/timemachine:smb

Example usage with exposing ports without Avahi discovery; all available environment variables set to their default values:

docker run -d --restart=always \
  --name timemachine \
  --hostname timemachine \
  -p 137:137/udp \
  -p 138:138/udp \
  -p 139:139 \
  -p 445:445 \
  -e ADVERTISED_HOSTNAME="" \
  -e CUSTOM_SMB_CONF="false" \
  -e CUSTOM_USER="false" \
  -e DEBUG_LEVEL="1" \
  -e HIDE_SHARES="no" \
  -e EXTERNAL_CONF="" \
  -e MIMIC_MODEL="TimeCapsule8,119" \
  -e TM_USERNAME="timemachine" \
  -e TM_GROUPNAME="timemachine" \
  -e TM_UID="1000" \
  -e TM_GID="1000" \
  -e PASSWORD="timemachine" \
  -e SET_PERMISSIONS="false" \
  -e SHARE_NAME="TimeMachine" \
  -e SMB_INHERIT_PERMISSIONS="no" \
  -e SMB_NFS_ACES="yes" \
  -e SMB_METADATA="stream" \
  -e SMB_PORT="445" \
  -e SMB_VFS_OBJECTS="acl_xattr fruit streams_xattr" \
  -e VOLUME_SIZE_LIMIT="0" \
  -e WORKGROUP="WORKGROUP" \
  -v /path/on/host/to/backup/to/for/timemachine:/opt/timemachine \
  -v timemachine-var-lib-samba:/var/lib/samba \
  -v timemachine-var-cache-samba:/var/cache/samba \
  -v timemachine-run-samba:/run/samba \
  mbentley/timemachine:smb

The images are also compatible with Kubernetes. Checkout timemachine-k3s.yaml as an example for running a TimeMachine backup server on a single-node k3s cluster running (on a Raspberry Pi 4).

This works best with --net=host so that discovery can be broadcast. Otherwise, you will need to expose the above ports and then you must manually map the share in Finder for it to show up (open Finder, click Shared, and connect as smb://hostname-or-ip/TimeMachine with your TimeMachine credentials). Using --net=host only works if you do not already run Samba or Avahi on the host! Alternatively, you can use the SMB_PORT option to change the port that Samba uses. See below for another workaround if you do not wish to change the Samba port.

If you are running the armv7l image, you may see and error when trying to start the container:

s6-svscan: warning: unable to iopause: Operation not permitted

This is due to an issue with the libseccomp2 package. You have two options:

1. Disable seccomp for the container by adding the --security-opt seccomp=unconfined argument (this has security implications)

2. Install a backported version of libseccomp2:

   wget http://ftp.us.debian.org/debian/pool/main/libs/libseccomp/libseccomp2_2.5.1-1~bpo10+1_armhf.deb
   sudo dpkg -i libseccomp2_2.5.1-1~bpo10+1_armhf.deb
   

This issue has been observed on Raspberry Pi OS (formerly known as Raspbian) based on Debian 10 (Buster) but may also be found on other distros as they may commonly use the libseccomp2 package version 2.3.3-4.

Note: If you are already running Samba/Avahi on your Docker host (or you're wanting to run this on your NAS), you should be aware that using --net=host will cause a conflict with the Samba/Avahi install. Raspberry Pi users: be aware that there is already an mDNS responder running on the stock Raspberry Pi OS image that will conflict with the mDNS responder in the container.

If your host is running Avahi, you can configure it to act as a reflector, and the container advertisements will be broadcast to your host network without using --net=host. To do this, edit the avahi config (/etc/avahi/avahi-daemon.conf) on the host:

• set enable-reflector=yes
• set cache-entries-max=0 - this prevents issues with Apple devices reporting duplicate names and adding/incrementing numbers in their name (references: https://blogs.thismonkey.com/?p=33 and https://community.ui.com/questions/mdns-reflector-help-computer-name-keeps-changing/180dd51f-a5b2-465c-88c2-6e85ab03c38a#answer/4732ed77-37aa-4f30-b992-cf99752e4f6a)

Then set the ADVERTISED_HOSTNAME environment variable in your container config to the mDNS hostname of your host, without the .local suffix.

As an alternative, you can use the macvlan driver in Docker which will allow you to map a static IP address to your container. If you have issues setting up Time Machine with the configuration, feel free to open an issue and I can assist - this is how I persoanlly run time machine.

1. Create a macvlan Docker network (assuming your local subnet is 192.168.1.0/24, the default gateway is 192.168.1.1, and eth0 for the host's network interface):

docker network create -d macvlan --subnet=192.168.1.0/24 --gateway=192.168.1.1 -o parent=eth0 macvlan1

On devices such as Synology DSM, the primary network interface may be ovs_eth0 due to the usage of Open vSwitch. If you are unsure of your primary network interface, this command may help:

$ route | grep ^default | awk '{print $NF}'
eth0

The macvlan driver can use another network interface as the documentation states above but in cases where multiple network interfaces may exist and they might not all be connected, choosing the primary network interface is generally safe.

1. Add --network macvlan1 and --ip 192.168.1.x to your docker run command where 192.168.1.x is a static IP to assign to Time Machine

services:
  timemachine:
    hostname: timemachine
    mac_address: "AA:BB:CC:DD:EE:FF"
    networks:
      timemachine:
        ipv4_address: 192.168.1.x

networks:
  timemachine:
    driver: macvlan
    driver_opts:
      parent: eth0
    ipam:
      config:
        - subnet: 192.168.1.0/24
          ip_range: 192.168.1.0/24
          gateway: 192.168.1.1

1. hostname, mac_address, and ipv4_address are optional, but can be used to control how it is configured on the network. If not defined, random values will be used.
2. This config requires docker-compose version 1.27.0+ which implements the compose specification.

If you're using an external volume like in the example above, you will need to set the filesystem permissions on disk. By default, the timemachine user is 1000:1000.

The backing data store for your persistent time machine data must support extended file attributes (xattr). Remote file systems, such as NFS, will very likely not support xattrs. See #61 for more details. This image will check and try to set xattrs to a test file in /opt/${TM_USERNAME} to warn the user if they are not supported but this will not prevent the image from running.

Also note that if you change the TM_USERNAME value that it will change the data path from /opt/timemachine to /opt/<value-of-TM_USERNAME>.

Default credentials:

• Username: timemachine
• Password: timemachine

In order to add multiple users who have their own shares, you will need to create a file for each user and put them in a directory. The file name must end in .conf or it will not be parsed and the contents must be environment variable formatted proper and include all of the values below in the example. Only VOLUME_SIZE_LIMIT can be empty if you do not want to set a quota.

This is an example to create a user named foo. The EXTERNAL_CONF variable should point to the directory that contains the user definition files. Create multiple files with different attributes to create multiple users and shares.

foo.conf

TM_USERNAME=foo
TM_GROUPNAME=foogroup
PASSWORD=foopass
SHARE_NAME=foo
VOLUME_SIZE_LIMIT="1 T"
TM_UID=1000
TM_GID=1000

This run command has the necessary path to where the external user files will be mounted (set in EXTERNAL_CONF) and the volume mount that matches the path specified in EXTERNAL_CONF.

Note: You will need to either bind mount /opt or each SHARE_NAME directory under /opt for each user.

docker run -d --restart=always \
  --name timemachine \
  --net=host \
  -e ADVERTISED_HOSTNAME="" \
  -e CUSTOM_SMB_CONF="false" \
  -e CUSTOM_USER="false" \
  -e DEBUG_LEVEL="1" \
  -e MIMIC_MODEL="TimeCapsule8,119" \
  -e EXTERNAL_CONF="/users" \
  -e HIDE_SHARES="no" \
  -e TM_USERNAME="timemachine" \
  -e TM_GROUPNAME="timemachine" \
  -e TM_UID="1000" \
  -e TM_GID="1000" \
  -e PASSWORD="timemachine" \
  -e SET_PERMISSIONS="false" \
  -e SHARE_NAME="TimeMachine" \
  -e SMB_INHERIT_PERMISSIONS="no" \
  -e SMB_NFS_ACES="yes" \
  -e SMB_METADATA="stream" \
  -e SMB_PORT="445" \
  -e SMB_VFS_OBJECTS="acl_xattr fruit streams_xattr" \
  -e VOLUME_SIZE_LIMIT="0" \
  -e WORKGROUP="WORKGROUP" \
  -v /path/on/host/to/backup/to/for/timemachine:/opt \
  -v timemachine-var-lib-samba:/var/lib/samba \
  -v timemachine-var-cache-samba:/var/cache/samba \
  -v timemachine-run-samba:/run/samba \
  -v /path/on/host/to/user/file/directory:/users \
  mbentley/timemachine:smb

This is an example to using Docker secrets to pass the password via a file

password.txt

my_secret_password

The follow example shows the key values required for in your compose file.

version: "3.3" # or greater
services:
  timemachine:
    # ...
    environment:
      - PASSWORD_FILE=/run/secrets/password
      # ...
    secrets:
      - password

secrets:
  password:
    file: ./password.txt

docker-compose -f timemachine-compose.yml up -d

docker run -d --restart=always \
  --net=host \
  --name timemachine \
  -e CUSTOM_AFP_CONF="false" \
  -e CUSTOM_USER="false" \
  -e LOG_LEVEL="info" \
  -e MIMIC_MODEL="TimeCapsule6,106" \
  -e TM_USERNAME="timemachine" \
  -e TM_GROUPNAME="timemachine" \
  -e TM_UID="1000" \
  -e TM_GID="1000" \
  -e PASSWORD="timemachine" \
  -e SET_PERMISSIONS="false" \
  -e SHARE_NAME="TimeMachine" \
  -e VOLUME_SIZE_LIMIT="0" \
  -v /path/on/host/to/backup/to/for/timemachine:/opt/timemachine \
  -v timemachine-netatalk:/var/netatalk \
  -v timemachine-logs:/var/log/supervisor \
  mbentley/timemachine:afp

docker run -d --restart=always \
  --name timemachine \
  --hostname timemachine \
  -p 548:548 \
  -p 636:636 \
  -e CUSTOM_AFP_CONF="false" \
  -e CUSTOM_USER="false" \
  -e LOG_LEVEL="info" \
  -e MIMIC_MODEL="TimeCapsule6,106" \
  -e TM_USERNAME="timemachine" \
  -e TM_GROUPNAME="timemachine" \
  -e TM_UID="1000" \
  -e TM_GID="1000" \
  -e PASSWORD="timemachine" \
  -e SET_PERMISSIONS="false" \
  -e SHARE_NAME="TimeMachine" \
  -e VOLUME_SIZE_LIMIT="0" \
  -v /path/on/host/to/backup/to/for/timemachine:/opt/timemachine \
  -v timemachine-netatalk:/var/netatalk \
  -v timemachine-logs:/var/log/supervisor \
  mbentley/timemachine:afp

Thanks for odarriba and arve0 for their examples to start from.