Request about pokedex HOT 7 CLOSED

I'm also Team Mystics. It would be nice if you could put that on the front of the case

from pokedex.

it mostly depends on where you live (shipping cost)
and the resolution of the print,
the material cost (high quality, so no ebay) (print material)

*features, powered fan, pokemon go+ build in, powerbank, other

if someone where to print it for you (so print only) it could cost up to 10-20$
adding in the features: a price of 50$ minimum would be a good point to start.

if you know someone who owns a 3d printer the print would cost (around 5$) (material cost)
(using low quality ebay items for features) (about 25$).

since mass production is cheaper, a reasonable price, if it was a real market item would be about 30-40$

from pokedex.

Well all I want is the cases. I have a couple powerbanks I can install
myself. I will pay shipping and the costs of the cases but was wondering
if you could make me one for the Samsung galaxy grand prime and one for the
Samsung galaxy Express 3
On Jul 20, 2016 4:37 PM, "darknessblade" [email protected] wrote:

it mostly depends on where you live (shipping cost)
and the resolution of the print,
the material cost (high quality, so no ebay) (print material)
*features, powered fan, pokemon go+ build in, powerbank, other

if someone where to print it for you (so print only) it could cost up to
10-20$
adding in the features: a price of 50$ minimum would be a good point to

start.

if you know someone who owns a 3d printer the print would cost (around 5$)
(material cost)
(using low quality ebay items for features) (about 25$).

since mass production is cheaper, a reasonable price, if it was a real
market item would be about 30-40$

—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
#12 (comment),
or mute the thread
https://github.com/notifications/unsubscribe-auth/ATk1jonZXshQXQBAkfabsp5v0yvD9iMDks5qXocMgaJpZM4JPS1O
.

from pokedex.

hello BTC

(i dont have a printer myself, but i know someone who does, so i might be unable to give you a good price )
i will ask how much it would cost to print

as for shippping cost:
if you can provide me with your mail, and hometown
i can look into how much it would cost to print it for you,

since i have to alter the model to fit your phones:

(if you can also provide me with pictures of your powerbank, i can look into it to fully imply the powerbank) (altering the model) (this only works with small bar/cilinder powerbanks)

from pokedex.

Darknessblade can you email me privately and I'll give you all that

On Jul 21, 2016 2:19 AM, "darknessblade" [email protected] wrote:

hello BTC

(i dont have a printer myself, but i know someone who does, so i might be
unable to give you a good price )
i will ask how much it would cost to print

as for shippping cost:
if you can provide me with your mail, and hometown
i can look into how much it would cost to print it for you,

since i have to alter the model to fit your phones:

(if you can also provide me with pictures of your powerbank, i can look
into it to fully imply the powerbank) (altering the model) (this only works
with small bar/cilinder powerbanks)

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
#12 (comment),
or mute the thread
https://github.com/notifications/unsubscribe-auth/ATk1jmWsL4V4ry36pfkq4q2kV4z_-r5Kks5qXw9vgaJpZM4JPS1O
.

from pokedex.

btc, i made my mail publoc for a short while please check in the next 2 hours, then i set it at privat again

from pokedex.

Hi,

I happened to come across this issue when checking out this repository. Sorry for the delay in reply. The project files were released to the public for those interested in adjusting the models and making their own case. There are no plans with SparkFun to adjust the files or selling the case as a product for the Nexus 6p. However, it looks like someone in the community tried making a universal body design [ #8 ] after forking this repository.

To modify, you will need a 3D modeling program (like Fusion 360, Tinkercad). If you do not have experience modifying 3D models, you may want to check out this tutorial on Getting Started with 3D Printing Using Tinkercad for an idea on how to design and print an enclosure. You'll need a 3D printer to print the models. If you don't have one, try checking a local maker space.

It looks like user "darknessblade" might have been able to help you out. =)

from pokedex.