Now works with ESP8266-12
library for Arduino and esp8266-12 to control Nokia 5110 LCD using hardware SPI
LCD pins using an arduino:
Pins 1-5 to arduino with 10K resistor or 5v to 3.3v logic level converter(for 5V arduinos)
1.RST -- to any pin(not SPI pins)
2.CE -- to any pin(not SPI pins)
3.DC -- to any pin(not SPI pins)
4.DIN -- to SPI MOSI(pin 11)
5.CLK -- to SPI SCK(pin 13)
6.VCC -- to 3.3V
7.Light -- to GND or 3.3V(on,off)
8.GND -- to GND
May work with 5V but I have not tested it(I don't recommended it)
LCD pins using an esp8266 12e wemos D1 r1:
1.RST -- to any pin(not SPI pins)
2.CE -- to any pin(not SPI pins)
3.DC -- to any pin(not SPI pins)
4.DIN -- to SPI MOSI(pin D11)
5.CLK -- to SPI SCK(pin D13)
6.VCC -- to 3.3V
7.Light -- to GND or 3.3V(on,off)
8.GND -- to GND
should work with other esp8266 boards that have hardware SPI