[Bug]: does not hand in data,but it mqtt accession signals it about solar2mqtt HOT 7 CLOSED

Can you please falsh the debug-version of the firmware and then open the WebSerial (button in settings page), let them a few seconds and then copy the text from WebSerial here.

from solar2mqtt.

He works again!
But the data appear as an entity without an identifier.
How can I take these under the energy ear? How I shall see it the battery and inverter consumption?

from solar2mqtt.

You have to implement the datapoints manually in HA. A good example for this can be found in Daly2MQTT. Must then be adapted to Solar2MQTT accordingly.
https://github.com/JoergOstertag/DALY-BMS-to-MQTT/tree/main/docs/iot-integration

from solar2mqtt.

I entered the data points in the configuration.yaml file. I have attached a picture. But these are entities without an identifier. Because of this, I cannot enter the data under the energy tab. I would like help with this. How can I display the data as an entity? What should I put in the configuration.yaml file?

from solar2mqtt.

Hi,

here is an example for the configuration. Its for daly2mqtt, but the form is the same.

Watch at code2, After that you must use a Rieman helper. The Energy Dashboard accepts only energy entities no power entities.

https://github.com/Jarnsen/Config_Daly2MQTT

from solar2mqtt.

This issue is stale because it has been open for 30 days with no activity.

from solar2mqtt.

This issue was closed because it has been inactive for 14 days since being marked as stale.

from solar2mqtt.