Solar2MQTT V0.5.1 WORK, V1.1.6 NO about solar2mqtt HOT 9 CLOSED

Hi,
From the release page (https://github.com/softwarecrash/Solar2MQTT/releases) it seems that from version 1.0 there was a wiring change, so 1st thing to do is to check if your wiring is correct according to the wiring diagram (https://github.com/softwarecrash/Solar2MQTT/wiki/Wiring-Diagram). Hope this helps

from solar2mqtt.

{
"EspData": {
"Device_name": "Solar2MQTT",
"ESP_VCC": 3.013,
"Wifi_RSSI": -46,
"sw_version": "1.1.6_debug d1_mini Dec 30 2023 15:05:55",
"Free_Heap": 24320,
"HEAP_Fragmentation": 3,
"json_memory_usage": 225,
"json_capacity": 2048,
"runtime": 9,
"ws_clients": 0
},
"DeviceData": {},
"LiveData": {}
}

from solar2mqtt.

EASUN POWER 3KW 230VAC 24V Soalr Inverter 50Hz 60Hz 3000VA PWM 70A Pure Sine Wave Charge Current Inversor With Battery Charge

from solar2mqtt.

yes, you were right, thank you very much, but it displays the temperature quite strangely

from solar2mqtt.

Yes, I have the same problem, but according to this (#72 (comment)), there is nothing to do, since this software cannot translate the numeric value to real temperature.

from solar2mqtt.

BTW, I have been investigating this issue myself, and according to the protocol description, the value of the temperature being displayed by this firmware should be divided by 10 in order to get the real temperature in Celsius. In your case, the real temp is 58.2

from solar2mqtt.

hello,
yes with V1.x a new wireing is needed

great point that the temp value divide is correct, i will check to implement a little routine that check if the value large over 200 or so it will be divide by 10, thank you

from solar2mqtt.

This issue is stale because it has been open for 30 days with no activity.

from solar2mqtt.

This issue was closed because it has been inactive for 14 days since being marked as stale.

from solar2mqtt.