[Bug]: Not reading W consumption values about solar2mqtt HOT 10 CLOSED

looks like your inverter use another sorting of data, your tempm value is the indicator

from solar2mqtt.

This will certainly not be the temperature value.... because it correctly reads 90W here and that's what the display of the inverter shows me.
The value is prescribed to me in MQTT, but only approx. 1 time per hour

from solar2mqtt.

your inverter send the data in the wrong order, you can actual nothing do.
i work on a complete new version but that need a lot of time

from solar2mqtt.

But according to the display of the inverter, the consumption is 89-92W and this is not shown anywhere. And if by chance it shows the correct value there, at that moment the load of the converter in percentage is also shown (which also shows correctly), but only for a moment and then again on both the value is 0

And when will you release it approximately with the completion time of the new version?

from solar2mqtt.

sure, thats missreading of the inverter data, what for model you have?

i dont have a timeline ore something, its a hobby and i work on other projects too

from solar2mqtt.

https://vi.aliexpress.com/item/1005003340956819.html?spm=a2g0o.order_list.order_list_main.46.6fff18020dsd74&gatewayAdapt=glo2vnm

from solar2mqtt.

check with the watchpower software and a com-usb cable to communicate, when this work, enable debug output on the software and post the log files here

from solar2mqtt.

OK

from solar2mqtt.

This issue is stale because it has been open for 30 days with no activity.

from solar2mqtt.

This issue was closed because it has been inactive for 14 days since being marked as stale.

from solar2mqtt.