[HELP] commands via MQTT not accepted about solar2mqtt HOT 5 CLOSED

Hey,

please try the correct mqtt path:

inverter2/DeviceControl/Set_Command/POP00

(without the _ in DeviceControl)

Edit: Either the Wiki is wrong there or i have a special Version :D
Edit2: ok, the code uses mqttclient.subscribe(topicBuilder(buff, "DeviceControl/Set_Command")); So i go to fix the Wiki page.

Greetings
Daniel

from solar2mqtt.

Hi Daniel.
Thanks for quick response.....ok, tried as suggested...and now works!!!
As mentioned, I used the pre-compiled 1.1.0 version, but I also looked at the source files and from their (same as on wiki) did it show the format to "Device_Control/Set_Command".
Clint.

from solar2mqtt.

Hi Daniel. Thanks for quick response.....ok, tried as suggested...and now works!!! As mentioned, I used the pre-compiled 1.1.0 version, but I also looked at the source files and from their (same as on wiki) did it show the format to "Device_Control/Set_Command". Clint.

nope, the code are correct

thanks @derLoosi for correct the wiki

from solar2mqtt.

This issue is stale because it has been open for 30 days with no activity.

from solar2mqtt.

This issue was closed because it has been inactive for 14 days since being marked as stale.

from solar2mqtt.