Adapter läuft auf tinkerboard s als Host, zeigt alles an ausser frequency, die findet er nicht...

Dear Adapter developer,

with js-controller 3.2 and js-controller 3.3 some additional checks were added to make sure that created objects match to the specifications and also written state values match to the object definition.

If something is not correct this is logged as 'warning' or 'info' log.

Please take the time to verify your adapter by ideally starting with a fresh instance and do some actions and verify the log. If you see a warn log there from these checks please adjust the adapter and fix the relevant cases.

For questions please refer to ioBroker/ioBroker.js-controller#1301

Additionally we are preparing Admin 5 which will have a completely rewritten UI. Please install Admin 5, activate that new UI and verify that the configuration of you adapter works as expected also there.

More informations on Admin 5 can be found in Forum https://forum.iobroker.net/topic/44282/test-adapter-admin-5-0-x-alpha-der-neuen-ui

Please close the issue after you checked it.

Thank you very much for your support!

Hi, ist there a plan to add GPIO support for the Tinker board just like RPI offers for PI?

I am an automatic service that looks for possible errors in ioBroker and creates an issue for it. The link below leads directly to the test:

https://adapter-check.iobroker.in/?q=https://raw.githubusercontent.com/simatec/ioBroker.tinker

• [E150] No common.connectionType found in io-package.json
• [E152] No common.dataSource found in io-package.json
• [E154] common.dependencies must contain{"js-controller": ">=2.0.0"} or {"js-controller": ">=3.0.0"}
• [E605] No actual year found in copyright. Please add "Copyright (c) 2022 simatec [email protected]" at the end of README.md
• [E701] No actual year found in LICENSE. Please add "Copyright (c) 2014-2022 simatec [email protected]" at the start of LICENSE

Thanks,
your automatic adapter checker.

P.S.: There is a community in Github, which supports the maintenance and further development of adapters. There you will find many experienced developers who are always ready to assist anyone. New developers are always welcome there. For more informations visit: https://github.com/iobroker-community-adapters/info

I am an automatic service that looks for possible errors in ioBroker and creates an issue for it. The link below leads directly to the test:

https://adapter-check.iobroker.in/?q=https://raw.githubusercontent.com/simatec/ioBroker.tinker

• [E802] No topics found in the repository. Please go to "https://github.com/simatec/ioBroker.tinker" and press "Manage topics"

I have also found warnings that may be fixed if possible.

• [W113] Adapter should support compact mode

Thanks,
your automatic adapter checker.

P.S.: There is a community in Github, which supports the maintenance and further development of adapters. There you will find many experienced developers who are always ready to assist anyone. New developers are always welcome there. For more informations visit: https://github.com/iobroker-community-adapters/info

Think about update stable version to 1.3.2

Version: stable=1.3.0 (69 days old) => latest=1.3.2 (31 days old)
Installs: stable=40 (39.22%), latest=4 (3.92%), total=102

Click to use developer portal
Click to edit

Note: This is an automatically generated message and not personally authored by bluefox!
Do not close this issue manually as a new issue will be created if condition for update still exists
@mcm1957 for evidence

Dear Adapter develop,

Node.js 14 is now available for a year and Node.js 16 was release just some days ago and will become LTS by October 2021. We plan to update the ioBroker Node.js recommendation (currently 12.x) to 14.x later this year.

Please check your adapter with Node.js 14 especially, and ideally also directly with Node.js 16

Please add both versions to the adapter testing which is executed on commits.

If your adapter requires a certain minimum version of Node.js please set the 'engine' setting in package.json accordingly! Please also do this if the adapter is not able to work in certain Node.js versions, so that ioBroker can prevent users from installing te adapter if not compatible!

On questions please talk to us at ioBroker/ioBroker.js-controller#1138

Please close the issue after you checked it.

Thank you very much for your support!

Think about update stable version to 1.1.1

Version: stable=1.1.0 (604 days old) => latest=1.1.1 (15 days old)
Installs: stable=94 (78.33%), latest=15 (12.5%), total=120
Click to edit

Your adapter is already in ioBroker latest repository available to be used by testwilling users. In order to make your adapter also available for the wide user base which uses the stable repository you should also add your adapter to the stable repository. Please see instructions at https://github.com/ioBroker/ioBroker.repositories#requirements-for-adapter-to-get-added-to-the-stable-repository

Thank you for your support.

Datapoint is type number but Adapter sends string.

Example Lofile:
tinker.0 | 2022-08-03 20:27:24.634 | info | State value to set for "tinker.0.cpu.load1" has to be type "number" but received type "string" tinker.0 | 2022-08-03 20:26:24.625 | info | State value to set for "tinker.0.cpu.load15" has to be type "number" but received type "string" tinker.0 | 2022-08-03 20:26:24.624 | info | State value to set for "tinker.0.cpu.load5" has to be type "number" but received type "string"

Think about update stable version to 1.2.1

Version: stable=1.2.0 (277 days old) => latest=1.2.1 (30 days old)
Installs: stable=65 (61.9%), latest=4 (3.81%), total=105

Click to use developer portal
Click to edit

Note: This is an automatically generated message and not personally authored by bluefox!

Hi,

the new js-controller 2.0 will come into latest repository in the next days and we want to make sure that all adapters are working well. We already did a 2 weeks Beta test and so some adapter were aleady checked and some needed slight adjustments.

You can find more information in ioBroker/ioBroker.js-controller#482 and in the ioBroker Forum. If you have more technical questions please write in the referenced issue or in the Developer thread please. General questions are best in the genral thread.

Please update your systems to js-controller 2.0 and check your adapter.

Please close this issue once you have checked your adapter or received successfull reports from users.

Thank you very much for your support. Please contact us in the other Threads or Forum on any question.

Bei einer Multihost Installation kann keine Instanz auf dem Slave erstellt werden

The upcoming version 2.0.0 of js-controller will support a new mode for low memory devices. For this, a few minor adjustments to the adapter must be made. Please follow these instructions: https://forum.iobroker.net/viewtopic.php?f=24&t=20387#p213466

Think about update stable version to 1.3.0

Version: stable=1.2.1 (76 days old) => latest=1.3.0 (28 days old)
Installs: stable=45 (43.27%), latest=6 (5.77%), total=104

Click to use developer portal
Click to edit

Note: This is an automatically generated message and not personally authored by bluefox!
Do not close this issue manually as a new issue will be created if condition for update still exists
@mcm1957 for evidence

❗ [E150] No common.connectionType found in io-package.json
❗ [E152] No common.dataSource found in io-package.json
👀 [W171] "common.title" is deprecated in io-package.json
👀 [W105] "common.titleLang" should be translated into all supported languages (en, de, ru, pt, nl, fr, it, es, pl, uk, zh-cn)
👀 [W109] "common.desc" should be translated into all supported languages (en, de, ru, pt, nl, fr, it, es, pl, uk, zh-cn)
👀 [W170] "common.keywords" should not contain "iobroker, adapter, smart home" io-package.json
use a React based UI

Hi,
thank you for the gread adapter. Works like a charm.
Two suggrestions:

• is it possible to add units to the datapoints? Like °C or Mb?
• And i think the datapoints should be readonly (common.write=false).

Again, thank you!

Think about update stable version to 1.2.0

Version: stable=1.1.1 (500 days old) => latest=1.2.0 (15 days old)
Installs: stable=90 (69.77%), latest=13 (10.08%), total=129
Click to edit

Think about update stable version to 1.3.0

Version: stable=1.2.1 (75 days old) => latest=1.3.0 (27 days old)
Installs: stable=45 (44.12%), latest=6 (5.88%), total=102

Click to use developer portal
Click to edit

Note: This is an automatically generated message and not personally authored by bluefox!
Do not close this issue manually as a new issue will be created if condition for update still exists
@mcm1957 for evidence

I am an automatic service that looks for possible errors in ioBroker and creates an issue for it. The link below leads directly to the test:

https://adapter-check.iobroker.in/?q=https://raw.githubusercontent.com/simatec/ioBroker.tinker

• [E150] No common.connectionType found in io-package.json
• [E152] No common.dataSource found in io-package.json

Thanks,
your automatic adapter checker.

P.S.: There is a community in Github, which supports the maintenance and further development of adapters. There you will find many experienced developers who are always ready to assist anyone. New developers are always welcome there. For more informations visit: https://github.com/iobroker-community-adapters/info

Dear Adapter developer,

with js-controller 4.0 object definitions are now also checked that min/max in only provided for number/mixed objects and that the type of the default value matches to the object type.

If something is not correct this is logged as 'warning' or 'info' log.

Please also make sure to update to the lastest @iobroker/testing dependency 2.5.4 or to accept the PR from Apollon77 for legacy testing!

Please spent some time to verify your adapter by ideally starting with a fresh instance and do some actions and verify the log. If you see a warn or info log there from these checks please adjust the adapter and fix the relevant cases.

For questions please refer to ioBroker/ioBroker.js-controller#1749

Please close the issue after you checked it.

Thank you very much for your support to get the best experience for the growing numbers of ioBroker users!