This software is written according to the paper The problem of slope stability is discussed from the perspective of slope size, and the detailed calculation process is referred to the paper.

本软件根据论文 The problem of slope stability is discussed from the perspective of slope size (从坡形尺寸角度探讨边坡稳定性问题) 编写，详细的计算过程请查阅该论文。

Note: The title of the paper may change later.

注：论文标题后期可能发生变化

如下图所示，存在点 $(x_0,\ y_0)$ 和点 $(x_1,\ y_1)$ 以及待求点的横坐标 $x$ ，则可用下式计算待求点的纵坐标 $y$ ：

$$ y=\frac{y_1-y_0}{x_1-x_0}\times(x-x_0) + y_0 $$

1. Slope heigh / 坡高 $H$ (H)
2. Slope angle / 坡角 $\beta$ (beta)

1. Cohesion / 黏聚力 $c$ (c)
2. Gravity / 重度 $\gamma$ (gamma)
3. Angle of internal friction / 内摩擦角 $\varphi$ (varphi)
4. Groundwater coefficient / 地下水系数 $r_{\rm u}$ (r_u)
5. Horizontal scanning interval seismic coefficient / 水平地震系数 $\alpha_{\rm w}$ (alpha_w)

$$ f_{\rm x} = \frac {c}{\gamma H} $$

$$ f_{\rm y} = \tan \varphi $$

$$ r_{\rm u} = ? $$

$$ \alpha_{\rm w} = ? $$

Note: The $f_{\rm x}$ code in Formula (1) is written asf_x, and the $f_{\rm y}$ code in Formula (2) is written as f_y.

注：式 (1) 中的 $f_{\rm x}$ 代码写作f_x，式 (2) 中的 $f_{\rm y}$ 代码写作f_y。

The current safety factor f ('f') can be calculated by the Formulas (1), (2), (3) and (4) combined with the table.

由式 (1)、(2) 、(3) 和 (4) 再结合表和插值法可计算得当前安全系数 $f$ (f)。

$$ H^* = \frac{c}{\gamma \tan \varphi} $$

$$ H=? $$

$$ \beta = ? $$

$$ r_{\rm u} = ? $$

$$ \alpha_{\rm w} = ? $$

The slope shape influence factor $\delta$ (delta) can be calculated by the Formulas (5), (6), (7), (8) and (9) combined with the table.

由式 (5)、(6)、(7)、(8) 和 (9) 再结合表和插值法可计算坡形影响因子 $\delta$ (delta)。

$$ F_{\rm S} = \delta f $$

The safety factor $F_{\rm S}$ (F_S) can be calculated from Formula (10).

由式 (10) 可以计算安全系数 $F_{\rm S}$ (F_S)。

The structure of software is following / 软件结构如下：

ICSS-Slope

• main.py

• Readme.md

• calc_func_files

  • calc_delta_from_H.py

  • calc_delta_from_H_star.py

  • calc_delta_from_r_u_alpha_w.py

  • calc_delta_func.py

  • calc_f_func.py

  • calc_F_s_func.py

  • check_paras_func.py

  • __init__.py

• para_files

  • alpha_w=0.05.xlsx

  • alpha_w=0.10.xlsx

  • f_calc_paras.xlsx

  • r_u=0,alpha_w=0.xlsx

  • r_u=0.25.xlsx

  • r_u=0.50.xlsx

  • __init__.py

• rec_files

  • MainWindow.ui

  • MainWindow_ui.py

  • main_window_class.py

  • model.png

  • rec.qrc

  • rec_rc.py

  • __init__.py

1. As shown in the following figure, the correct parameters are input into the corresponding position. / 如下图所示，将正确的参数输入对应位置。

   

2. As shown in the following figure, click the button to calculate, you can get the results. / 如下图所示，点击按钮进行计算，即可得出结果。

   

Python version \ Python 版本: Python 3.8.19