secopsbot / bcmon Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/bcmon
Automatically exported from code.google.com/p/bcmon
1. Copy your sources to drivers/net/wireless/bcm4329/
2. Enable BCM4329 [=m] in menuconfig
3. Try to build using make
What is the expected output?
CC [M] drivers/net/wireless/bcm4329/wl_iw.o
What do you see instead?
CC [M] drivers/net/wireless/bcm4329/wl_iw.o
drivers/net/wireless/bcm4329/wl_iw.c: In function 'wl_iw_set_pmksa':
drivers/net/wireless/bcm4329/wl_iw.c:5162:5: error: array subscript is above
array bounds [-Werror=array-bounds]
drivers/net/wireless/bcm4329/wl_iw.c:5165:5: error: array subscript is above
array bounds [-Werror=array-bounds]
cc1: all warnings being treated as errors
What version of the product are you using? On what operating system?
Svn trunk at revision 11, kernel Linux/arm 3.0.48-ck1, toolchain
linaro-android_toolchain-4.7-2012.07
Original issue reported on code.google.com by [email protected]
on 28 Oct 2012 at 12:48
What steps will reproduce the problem?
1. Compile driver for CM10 4.1.1 kernel
2. Copy driver and monitor-enabled firmware to sdcard
3. Execute setup.sh from console
What is the expected output? What do you see instead?
Driver should load when executing insmod.
Instead, insmod never ends execution.
lsmod output shows:
bcm4329 292751 1 - Loading 0x00000000
What version of the product are you using? On what operating system?
Android Cyanogen Mod 10 (4.1.1 kernel 3.0.43+)
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 8 Oct 2012 at 8:46
What steps will reproduce the problem?
1. I install bcmon
2. Open it, give supruser permission
3. App does not ask me about installing tools
4. Empty program
Does bcmon support nexus 4? I tried to reinstall/reboot, did not help.
Original issue reported on code.google.com by [email protected]
on 14 Sep 2013 at 10:36
What steps will reproduce the problem?
1. open
2. bcmon has been granted root access
3. firmware model not detected
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
v1.1 android 4.1
Please provide any additional information below.
device: xperia sp
I think this happened because busybox is installed in my device
Original issue reported on code.google.com by [email protected]
on 3 Apr 2014 at 6:48
What steps will reproduce the problem?
1. download gs2_bundle
2. unzip it
3. sh setup.sh
What is the expected output? What do you see instead?
LOADING MODULE
insmod: can't insert 'dhd.ko': invalid module format
What version of the product are you using? On what operating system?
r5 on cm9.0.0 (stable)
Original issue reported on code.google.com by 01ttouch
on 18 Sep 2012 at 7:10
What steps will reproduce the problem?
1. Installed bcmon.apk on GT-i9100 with CM 9 stable
2. Upgraded to CM 10.1.3 stable
3. Deleted /data /cache and dalvik cache
What is the expected output?
Working wifi. Working monitor mode.
What do you see instead?
When enabling wifi it gets stuck in "Turning on wifi" and eventually fails.
bcmon app is fails to enable monitor mode or restore original fw.
What version of the product are you using? On what operating system?
Latest on CM 9 or CM 10.1.3.
Please provide any additional information below.
Tried flashing stock rom and kernel but the problem remains.
Logcat says "unable to load wifi driver"
Original issue reported on code.google.com by [email protected]
on 3 Oct 2013 at 8:23
The Galaxy P3110 uses the bcm4330 chipset. I build driver dhd.ko for 3.0.31
kernel. But then I do
ifconfig wlan0 up
error: SIOCSIFFLAGS (Operation not permitted)
<4>[58561.661071] C1 [ ifconfig]
<4>[58561.661102] C1 [ ifconfig] Dongle Host Driver, version 1.15.11
<4>[58561.661132] C1 [ ifconfig] Compiled in
drivers/net/wireless/bcmdhd/src on Nov 27 2013 at 18:58:47
<4>[58562.437103] C0 [ ifconfig] dhdsdio_htclk: HT Avail timeout
(1000000): clkctl 0x50
<4>[58562.437133] C0 [ ifconfig] dhd_bus_init: clock state is wrong.
state = 1
<4>[58562.437255] C0 [ ifconfig] dhd_bus_start failed bus is not ready
<4>[58562.437316] C0 [ ifconfig] dhd_open: failed with code -19
What's the problem?
Original issue reported on code.google.com by [email protected]
on 29 Nov 2013 at 6:33
What steps will reproduce the problem?
1. bcmon already start
2. aircrackgui is ok
3. reaver can not run,bmon_wrapper_loaded
What is the expected output? What do you see instead?
bmon_wrapper_loaded
[1]+stopped (signal) reaver
What version of the product are you using? On what operating system?
cm7
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 11 Apr 2014 at 8:44
can't run as root su Failed
I Didn't run the bcmon in this file
My mobile model is micromax a76 and the version of android is jellybean 4.2.2
Please tell which version of bcmon is suitable for my phone after opening that
bcmon only i can run rfa and check whether the wifi crack is working or not
please help me in that
Thanks in Advance sir.
Original issue reported on code.google.com by [email protected]
on 5 Jan 2014 at 3:17
Will this work for samsung galaxy note 2? And is there a beta I can test?
Original issue reported on code.google.com by [email protected]
on 4 Dec 2012 at 1:30
What steps will reproduce the problem?
1. install bcmon.apk firmware : no ouput message error
2. when i want run airodump: crash
when i run "mode monitor" it change eth0 to wlan0 but iwconfig show me "wlan0
mode managed"
-------------------------------------------------
nexus one
android 2.3.7
2.6.37.6-cyanogenmod
------------------------------------------------
ps : I can run monitor mode with nexus_bundle and i have to update busybox
manualy : busybox-armv7l, but airplay no work.
for people that can't run airodup from utils, don't forget to move all like
this! :
mv aircrack aircrack-static misc /data/local
cd /data/local
chmod -R a+x aircrack aircrack-static misc
Please provide any additional information below.
i buy a nexus one only for test this!!! ;-)
Original issue reported on code.google.com by [email protected]
on 22 Sep 2013 at 8:56
Attachments:
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
not compatible for motorola defy +
please fix
Original issue reported on code.google.com by [email protected]
on 6 Mar 2014 at 8:12
What steps will reproduce the problem?
1. When i open bcmon it says firmware installed 0
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Htc sensation xe running cm11 sultanxda pure kernel
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 26 Mar 2014 at 3:51
Radiotap support wold be great.
If Reaver could be used with bcm4329 smart phone, 80% of networks could be
cracked in meter of minutes.
In att PCAP file of Reaver with current driver.
Original issue reported on code.google.com by [email protected]
on 23 Jun 2013 at 8:51
Attachments:
What steps will reproduce the problem?
1. Run bcmon app
2. Tap to install firmware and tools
3.
What is the expected output? What do you see instead?
For a second i can see a message that error accured and asks me to send logs,
but quickly disappears.
What version of the product are you using? On what operating system?
$ lsmod
dhd 181519 0 - Live 0xbf000000
$ ls -la /system/wifi
drwxr-xr-x 1 root root 2048 Sep 23 16:47 .
drwxr-xr-x 1 root root 2048 Sep 23 16:47 ..
-rw-r--r-- 1 root root 228 Sep 23 16:47 bcm_loadecho.sh
-rw-r--r-- 1 root root 114 Sep 23 16:47 bcm_loadipf.sh
-rw-r--r-- 1 root root 68 Sep 23 16:47 connectap.sh
-rw-r--r-- 1 root root 215384 Sep 23 16:47 dhd.ko
-rw-r--r-- 1 root root 260345 Sep 23 16:47 firmware.bin
-rw-r--r-- 1 root root 268378 Sep 23 16:47 firmware_apsta.bin
-rw-r--r-- 1 root root 31184 Sep 23 16:47 iwconfig
-rw-r--r-- 1 root root 31516 Sep 23 16:47 iwlist
-rw-r--r-- 1 root root 18032 Sep 23 16:47 iwpriv
-rw-r--r-- 1 root root 720 Sep 23 16:47 nvram.txt
-rw-r--r-- 1 root root 5544 Sep 23 16:47 udp_server
$ cat /system/wifi/nvram.txt
sromrev=3
vendid=0x14e4
devid=0x432f
boardtype=0x57f
boardrev=0x11
boardflags=0x0200
xtalfreq=37400
aa2g=1
aa5g=0
ag0=255
pa0b0=5703
pa0b1=64272
pa0b2=65264
pa0itssit=62
pa0maxpwr=66
cckpo=0x4210
ofdmpo=0x44444444
mcs2gpo0=0xaaaa
mcs2gpo1=0xaaaa
rssismf2g=0xa
rssismc2g=0xb
rssisav2g=0x3
bxa2g=0
ccode=EU
cctl=0x0
cckdigfilttype=3
ofdmdigfilttype=1
rxpo2g=0
boardnum=1
macaddr=XX:XX:XX:XX:XX:XX
nocrc=1
otpimagesize=182
sd_gpout=0
sd_oobonly=1
hwhdr=0x05ffff031030031003100000
RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff
ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00
ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 26 Oct 2013 at 1:23
Attachments:
What steps will reproduce the problem?
1.apk wont install firmware just Fc's
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Any help would be great,or if theres any way i can help you to help me i would
be more than happy to do it/any other files u need etc.
Original issue reported on code.google.com by [email protected]
on 20 Aug 2013 at 4:41
What steps will reproduce the problem?
Trying to compile the module
What is the expected output? What do you see instead?
CC [M] drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.o
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:801: error:
'NUM_NL80211_IFTYPES' undeclared here (not in a function)
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:802: error: array index in
non-array initializer
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:802: error: (near
initialization for 'wl_cfg80211_default_mgmt_stypes')
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:803: error: field name not
in record or union initializer
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:803: error: (near
initialization for 'wl_cfg80211_default_mgmt_stypes')
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:804: error: field name not
in record or union initializer
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:804: error: (near
initialization for 'wl_cfg80211_default_mgmt_stypes')
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:806: error: array index in
non-array initializer
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:806: error: (near
initialization for 'wl_cfg80211_default_mgmt_stypes')
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:807: error: field name not
in record or union initializer
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:807: error: (near
initialization for 'wl_cfg80211_default_mgmt_stypes')
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:808: error: field name not
in record or union initializer
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:808: error: (near
initialization for 'wl_cfg80211_default_mgmt_stypes')
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:811: error: array index in
non-array initializer
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:811: error: (near
initialization for 'wl_cfg80211_default_mgmt_stypes')
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:812: error: field name not
in record or union initializer
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:812: error: (near
initialization for 'wl_cfg80211_default_mgmt_stypes')
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:813: error: field name not
in record or union initializer
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:813: error: (near
initialization for 'wl_cfg80211_default_mgmt_stypes')
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:821: error: array index in
non-array initializer
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:821: error: (near
initialization for 'wl_cfg80211_default_mgmt_stypes')
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:823: error: field name not
in record or union initializer
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:823: error: (near
initialization for 'wl_cfg80211_default_mgmt_stypes')
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:824: error: field name not
in record or union initializer
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:824: error: (near
initialization for 'wl_cfg80211_default_mgmt_stypes')
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:832: error:
'NL80211_IFTYPE_P2P_CLIENT' undeclared here (not in a function)
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:832: error: array index in
initializer not of integer type
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:832: error: (near
initialization for 'wl_cfg80211_default_mgmt_stypes')
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:833: error: field name not
in record or union initializer
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:833: error: (near
initialization for 'wl_cfg80211_default_mgmt_stypes')
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:834: error: field name not
in record or union initializer
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:834: error: (near
initialization for 'wl_cfg80211_default_mgmt_stypes')
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:837: error:
'NL80211_IFTYPE_P2P_GO' undeclared here (not in a function)
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:837: error: array index in
initializer not of integer type
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:837: error: (near
initialization for 'wl_cfg80211_default_mgmt_stypes')
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:838: error: field name not
in record or union initializer
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:838: error: (near
initialization for 'wl_cfg80211_default_mgmt_stypes')
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:839: error: field name not
in record or union initializer
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:839: error: (near
initialization for 'wl_cfg80211_default_mgmt_stypes')
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c: In function
'wl_cfg80211_mgmt_tx':
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:4371: error: implicit
declaration of function 'cfg80211_mgmt_tx_status'
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c: In function
'wl_cfg80211_change_bss':
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:4692: error: 'struct
bss_parameters' has no member named 'ht_opmode'
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c: At top level:
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:5383: warning:
initialization from incompatible pointer type
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:5393: warning:
initialization from incompatible pointer type
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:5394: warning:
initialization from incompatible pointer type
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:5395: warning:
initialization from incompatible pointer type
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:5396: warning:
initialization from incompatible pointer type
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:5408: error: unknown field
'mgmt_tx' specified in initializer
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:5408: warning:
initialization from incompatible pointer type
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:5409: error: unknown field
'mgmt_frame_register' specified in initializer
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:5409: warning:
initialization from incompatible pointer type
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c: In function
'wl_setup_wiphy':
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:5458: error: 'struct
wiphy' has no member named 'max_remain_on_channel_duration'
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:5459: error: 'struct
wiphy' has no member named 'mgmt_stypes'
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:5468: error:
'WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS' undeclared (first use in this
function)
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:5468: error: (Each
undeclared identifier is reported only once
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:5468: error: for each
function it appears in.)
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c: In function
'wl_inform_single_bss':
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:5597: error: too many
arguments to function 'ieee80211_channel_to_frequency'
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c: In function
'wl_notify_connect_status_ap':
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:5796: error: too many
arguments to function 'ieee80211_channel_to_frequency'
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:5806: error: implicit
declaration of function 'cfg80211_rx_mgmt'
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c: In function
'wl_notify_rx_mgmt_frame':
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:6475: error: too many
arguments to function 'ieee80211_channel_to_frequency'
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c: In function
'wl_construct_reginfo':
drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.c:8104: error: too many
arguments to function 'ieee80211_channel_to_frequency'
make[4]: *** [drivers/net/wireless/bcmdhd/src/wl/sys/wl_cfg80211.o] Error 1
make[3]: *** [drivers/net/wireless/bcmdhd] Error 2
make[2]: *** [drivers/net/wireless] Error 2
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2
What version of the product are you using? On what operating system?
android
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 36
EXTRAVERSION = .3-I927RUXKJ5-CL652095
kernel config
CONFIG_BCM4330=m
CONFIG_BROADCOM_WIFI_RESERVED_MEM=y
CONFIG_WLAN_COUNTRY_CODE=m
CONFIG_WLAN_REGION_CODE=100
toolchain =
android-ndk-r5/toolchains/arm-eabi-4.4.0/prebuilt/linux-x86/bin/arm-eabi-
Please provide any additional information below.
Contact for any extra information needed.
Original issue reported on code.google.com by [email protected]
on 20 Sep 2012 at 1:33
What steps will reproduce the problem?
1.apk wont install firmware just Fc's
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
On 4330
Please provide any additional information below.
Any help would be great,or if theres any way i can help you to help me i would
be more than happy to do it/any other files u need etc.
Original issue reported on code.google.com by [email protected]
on 20 Aug 2013 at 4:44
What steps will reproduce the problem?
1. Attempt to 'make modules' to build bcmon bcm4329.ko against current CM10
android_samsung_aries kernel
What is the expected output? What do you see instead?
CC [M] drivers/net/wireless/bcm4329/bcmon.o
CC [M] drivers/net/wireless/bcm4329/dhd_linux.o
CC [M] drivers/net/wireless/bcm4329/linux_osl.o
CC [M] drivers/net/wireless/bcm4329/bcmutils.o
CC [M] drivers/net/wireless/bcm4329/dhd_common.o
CC [M] drivers/net/wireless/bcm4329/dhd_custom_gpio.o
CC [M] drivers/net/wireless/bcm4329/wl_iw.o
CC [M] drivers/net/wireless/bcm4329/siutils.o
CC [M] drivers/net/wireless/bcm4329/sbutils.o
CC [M] drivers/net/wireless/bcm4329/aiutils.o
CC [M] drivers/net/wireless/bcm4329/hndpmu.o
CC [M] drivers/net/wireless/bcm4329/bcmwifi.o
CC [M] drivers/net/wireless/bcm4329/dhd_sdio.o
CC [M] drivers/net/wireless/bcm4329/dhd_linux_sched.o
CC [M] drivers/net/wireless/bcm4329/dhd_cdc.o
CC [M] drivers/net/wireless/bcm4329/bcmsdh_sdmmc.o
CC [M] drivers/net/wireless/bcm4329/bcmsdh.o
CC [M] drivers/net/wireless/bcm4329/bcmsdh_linux.o
drivers/net/wireless/bcm4329/bcmsdh_linux.c: In function
'bcmsdh_register_oob_intr':
drivers/net/wireless/bcm4329/bcmsdh_linux.c:639: error: implicit declaration of
function 'set_irq_wake'
make[4]: *** [drivers/net/wireless/bcm4329/bcmsdh_linux.o] Error 1
make[3]: *** [drivers/net/wireless/bcm4329] Error 2
make[2]: *** [drivers/net/wireless] Error 2
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2
What version of the product are you using? On what operating system?
Please provide any additional information below.
I am inexperienced at building kernel modules, not sure where I could grab the
necessary headers from
Original issue reported on code.google.com by [email protected]
on 21 Sep 2012 at 5:15
i have google nexus 7 tablet the app was wroking good i use reaver too, what
happen after one month when i tern the monitor mode on i go to reaver then i
got this text
Monitor-Mode activation failed.
Are you sure you have bcmon installed and your device is compatible?
can you give me some good idea how to fix it after i got this error if i click
at any option inside bcmon like airodump-ng the app close, before eveything
work
and i sent you a report with photos thanks you
Original issue reported on code.google.com by [email protected]
on 22 Apr 2014 at 9:01
What steps will reproduce the problem?
1. I tried to find my Broadcom Processor but unable to find it
2. I also searched for It on Internet but not found
3.
What is the expected output? What do you see instead?
Hoping Monitor Mode For Karbonn A15 From You For me and for all Intrested Users
What version of the product are you using? On what operating system?
No Version OS: Android 4.0.4
Please provide any additional information below.
You will find about my handsets config here:
http://www.gsmarena.com/karbonn_a15-5196.php
Original issue reported on code.google.com by [email protected]
on 26 Jul 2013 at 12:38
OK, I installed Bcmon, and run it, but it didn't ask me if I want to install
the toolkit, and goes strait to the status screen. If I try to go to home, it
crashes. What should I d
I am using the NEXUS 7.2, Android 4.2.2
Original issue reported on code.google.com by [email protected]
on 13 Apr 2014 at 8:36
Attachments:
What steps will reproduce the problem?
1. Open the app
2. When prompted to "install the firmware and tools", i select "Yes"
3. The app show "errors has occurred" and close.
What is the expected output? What do you see instead?
The app do not install the tools and close.
What version of the product are you using? On what operating system?
Android 2.3, bcmon release Jun 23, 2013, BCM4329
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 2 Sep 2013 at 9:51
Attachments:
What steps will reproduce the problem?
1. Checked out code from bcmon project.
2. made some changes to source tree to compile correctly. The changes I made is
attached in the patch file.Also changed kernel configuration. It is also
attached
3. moved new compiled module to /system/lib and "bcm4330_sta.bcmon.bin" to
"/system/etc/wifi/bcm4330_sta.bin"
4. insmod' ed cfg80211.ko
5. turned on wifi by pressing icon in desktop
6. checked status by using 'iwconfig'
What is the expected output? What do you see instead?
I expect a normal iwconfig output. but instead iwconfig waits lot of time and not printing info about the wireless interface. in that waiting time kmsg produces some error s . Its attached as iwconfig.log
What version of the product are you using? On what operating system?
'svn info' says
Path: .
URL: http://bcmon.googlecode.com/svn/trunk/bcm4330
Repository Root: http://bcmon.googlecode.com/svn
Repository UUID: f22563d7-eeaa-7245-33f1-0b5dc2617f4f
Revision: 7
Node Kind: directory
Schedule: normal
Last Changed Author: [email protected]
Last Changed Rev: 4
Last Changed Date: 2012-09-18 16:36:50 +0530 (Tue, 18 Sep 2012)
My phones os
cat /proc/version
Linux version 2.6.35.7 (harish@ubuntu) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-68) ) #35 PREEMPT Sun Mar 18 23:49:27 IST 2012
cat /proc/cmdline
console=ttyS0,115200n8 mem=362M kmemleak=off root=/dev/ram0 rw androidboot.console=ttyS0 mtdparts=bcm_umi-nand:256K@0K(bcm_boot)ro,2048K@256K(loke)ro,2048K@2304K(loke_bk)ro,256K@4352K(systemdata)ro,12800K@4608K(modem)ro,5120K@17408K(param_lfs)rw,5120K@22528K(boot)ro,5120K@27648K(boot_backup)ro,235520K@32768K(system)rw,40960K@268288K(cache)rw,201984K@309248K(userdata)rw,256K@511232K(efs)rw,256K@511488K(sysparm_dep)ro,256K@511744K(umts_cal)ro,1024K@512000K(cal)r BOOT_MODE=0 loglevel=0 BOOT_FOTA=0 DEBUG_LEVEL=LOW
Please provide any additional information below.
So I tried the above procedure with stock firmware.
at this time, iwconfig shows that wireless at monitor mode.But its clear that its not true. because we cant get monitor mode with stock firmware.
not only that, at this situation, I couldn't change the mode of wifi interface to 'managed' by using iwconfig.
the complete source tree is available at http://sourceforge.net/p/galaxyykernel/code/ci/958afa38ecf2ef20ea5586ce24796af36f5feac8/tree/drivers/net/wireless/4330/
So with my little knowledge, i think firmware changes is necessary for this device specially.
So I here attached my stock firmware .
One more request.
People like me are very much enthusiastic to know that how you people hacked the firmware. so please consider us.
Original issue reported on code.google.com by [email protected]
on 19 Mar 2013 at 4:28
Attachments:
What steps will reproduce the problem?
1. install firmware
2.
3.
What is the expected output? What do you see instead?
error ...
What version of the product are you using? On what operating system?
android 2.3.6
kernel 2.6.35.7
Please provide any additional information below.
$ lsmod
bcm4330 275864 0 - Live 0xbf1ac000
thanks , very good job !!!
Original issue reported on code.google.com by [email protected]
on 14 Sep 2013 at 11:31
Attachments:
The Galaxy Nexus uses the bcm4330 chipset. dhd.ko in bcm4330 can be built with
no issue for 3.0.31 kernel (used with Jelly Bean), however the kernel .config
has to be modified so the bcmdhd driver is built as a kernel module, not built
in to the kernel. Otherwise, you can't rmmod the driver. With that, the
dhd.ko module inserts, but has the following error. Note all DHD debug info is
turned on.
<4>[16382.549194] ## wifi_probe
<4>[16382.549285] wifi_set_power = 1
<4>[16383.280883] wifi_set_carddetect = 1
<6>[16383.422271] mmc1: new high speed SDIO card at address 0001
<4>[16383.424133] dhd_bus_register: Enter
<4>[16383.424835] dhd_module_init:
<4>[16383.424835] Dongle Host Driver, version 1.15.11
<4>[16383.424835] Compiled in drivers/net/wireless/bcmdhd-mon/src on Sep 25
2012 at 15:32:22
<4>[16383.426696] dhdsdio_probe : no mutex held. set lock
<4>[16383.426879] dhdsdio_probe: Enter
<4>[16383.426940] dhdsdio_probe: venid 0x14e4 devid 0x0000
<4>[16383.427124] dhdsdio_probe: allow device id 0, will check chip internals
<4>[16383.427368] F1 signature read @0x18000000=0x16444330
<4>[16383.427703] sdioh_cis_read: func_cis_ptr[0]=0x1070
<4>[16383.437286] Function 0 CIS:
<4>[16383.437377] 20 04 d0 02 30 43 21 02 0c 00 22 04 00 20 00 5a
<4>[16383.438842] ff
<4>[16383.439086] sdioh_cis_read: func_cis_ptr[1]=0x1000
<4>[16383.448638] Function 1 CIS:
<4>[16383.448791] 20 04 d0 02 30 43 21 02 0c 00 22 2a 01 00 00 00
<4>[16383.450256] 00 00 00 00 00 00 00 00 40 00 00 ff ff 80 00 00
<4>[16383.451690] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<4>[16383.453247] 00 00 00 00 00 00 ff
<4>[16383.454040] sdioh_cis_read: func_cis_ptr[2]=0x1038
<4>[16383.463562] Function 2 CIS:
<4>[16383.463653] 20 04 d0 02 30 43 21 02 0c 00 22 2a 01 01 00 00
<4>[16383.465118] 00 00 00 00 00 00 00 00 00 02 00 ff ff 80 00 00
<4>[16383.466522] 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00
<4>[16383.468078] 00 00 00 00 00 00 ff
<4>[16383.474121] DHD: dongle ram size is set to 294912(orig 294912)
<4>[16383.474639] dhd_attach: Enter
<4>[16383.474761] dhd_add_if: idx 0, handle->c68b7800
<3>[16383.476898] CFG80211-INFO2) wl_cfg80211_attach : wl_cfg80211_attach: wl =
0xc68b5320
<3>[16383.477233] CFG80211-INFO2) wl_create_event_handler : Enter
<3>[16383.477447] CFG80211-INFO2) wl_create_event_handler : wl = 0xc68b5320,
wl->event_tsk = 0xc68b5534
<4>[16383.477691] wl_create_event_handler thr:9f1 created
<3>[16383.477722] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xc68b5534
<3>[16383.477752] CFG80211-INFO2) wl_event_handler : DAEMONIZE completed
<3>[16383.477752] CFG80211-INFO2) wl_event_handler : tsk completed
<4>[16383.478149] wl_create_event_handler thr:9f1 started
<4>[16383.479766] dhd_attach thr:9f2 created
<4>[16383.479858] dhd_attach thr:9f2 started
<4>[16383.479980] dhd_attach thr:9f3 created
<4>[16383.480133] dhd_attach thr:9f3 started
<4>[16383.480255] dhd_attach thr:9f4 created
<4>[16383.480346] dhd_attach thr:9f4 started
<4>[16383.480499] dhd_early_suspend: enter
<4>[16383.480621] dhd_set_suspend: enter, value = 1 in_suspend=1
<4>[16383.480773] dhdsdio_probe_malloc: Enter
<4>[16383.480865] dhdsdio_probe_init: Enter
<4>[16383.481048] dhdsdio_probe_init: Initial value for sd_divisor is 2
<4>[16383.481201] dhdsdio_probe_init: Initial value for sd_mode is 2
<4>[16383.481323] dhdsdio_probe_init: Initial value for sd_blocksize is 512
<4>[16383.481475] dhdsdio_probe_init: bus module (through bcmsdh API) does not
support chaining
<4>[16383.481628] dhdsdio_probe: disable SDIO interrupts (not interested yet)
<4>[16383.481719] dhdsdio_probe: registered SDIO interrupt function ok
<4>[16383.481872] dhdsdio_probe: completed!!
<4>[16383.481964] Enter dhd_bus_start:
<4>[16383.482055] dhdsdio_clkctl: Enter
<4>[16383.482208] dhdsdio_htclk: Enter
<4>[16383.482360] CLKCTL: turned ON
<4>[16383.482452] dhd_os_wd_timer: Enter
<4>[16383.482543] dhdsdio_clkctl: 1 -> 3
<4>[16383.483459] dhdsdio_membytes: write 4 bytes at offset 0x00007ffc in
window 0x00040000
<4>[16383.483673] dhdsdio_download_code_file: download firmware
/sdcard/bcm4330_sta.bcmon.bin
<4>[16383.484863] dhdsdio_membytes: write 2048 bytes at offset 0x00000000 in
window 0x00000000
<4>[16383.485931] dhdsdio_membytes: write 2048 bytes at offset 0x00000800 in
window 0x00000000
<4>[16383.487396] dhdsdio_membytes: write 2048 bytes at offset 0x00001000 in
window 0x00000000
<4>[16383.487823] dhdsdio_membytes: write 2048 bytes at offset 0x00001800 in
window 0x00000000
<4>[16383.488311] dhdsdio_membytes: write 2048 bytes at offset 0x00002000 in
window 0x00000000
<4>[16383.488800] dhdsdio_membytes: write 2048 bytes at offset 0x00002800 in
window 0x00000000
<4>[16383.489196] dhdsdio_membytes: write 2048 bytes at offset 0x00003000 in
window 0x00000000
<4>[16383.489685] dhdsdio_membytes: write 2048 bytes at offset 0x00003800 in
window 0x00000000
<4>[16383.491058] dhdsdio_membytes: write 2048 bytes at offset 0x00004000 in
window 0x00000000
<4>[16383.492095] dhdsdio_membytes: write 2048 bytes at offset 0x00004800 in
window 0x00000000
<4>[16383.492523] dhdsdio_membytes: write 2048 bytes at offset 0x00005000 in
window 0x00000000
<4>[16383.493011] dhdsdio_membytes: write 2048 bytes at offset 0x00005800 in
window 0x00000000
<4>[16383.493469] dhdsdio_membytes: write 2048 bytes at offset 0x00006000 in
window 0x00000000
<4>[16383.493957] dhdsdio_membytes: write 2048 bytes at offset 0x00006800 in
window 0x00000000
<4>[16383.494354] dhdsdio_membytes: write 2048 bytes at offset 0x00007000 in
window 0x00000000
<4>[16383.494842] dhdsdio_membytes: write 2048 bytes at offset 0x00007800 in
window 0x00000000
<4>[16383.495300] dhdsdio_membytes: write 2048 bytes at offset 0x00000000 in
window 0x00008000
<4>[16383.495727] dhdsdio_membytes: write 2048 bytes at offset 0x00000800 in
window 0x00008000
<4>[16383.496185] dhdsdio_membytes: write 2048 bytes at offset 0x00001000 in
window 0x00008000
<4>[16383.496673] dhdsdio_membytes: write 2048 bytes at offset 0x00001800 in
window 0x00008000
<4>[16383.497161] dhdsdio_membytes: write 2048 bytes at offset 0x00002000 in
window 0x00008000
<4>[16383.497558] dhdsdio_membytes: write 2048 bytes at offset 0x00002800 in
window 0x00008000
<4>[16383.498046] dhdsdio_membytes: write 2048 bytes at offset 0x00003000 in
window 0x00008000
<4>[16383.498504] dhdsdio_membytes: write 2048 bytes at offset 0x00003800 in
window 0x00008000
<4>[16383.499999] dhdsdio_membytes: write 2048 bytes at offset 0x00004000 in
window 0x00008000
<4>[16383.500518] dhdsdio_membytes: write 2048 bytes at offset 0x00004800 in
window 0x00008000
<4>[16383.501007] dhdsdio_membytes: write 2048 bytes at offset 0x00005000 in
window 0x00008000
<4>[16383.501495] dhdsdio_membytes: write 2048 bytes at offset 0x00005800 in
window 0x00008000
<4>[16383.501922] dhdsdio_membytes: write 2048 bytes at offset 0x00006000 in
window 0x00008000
<4>[16383.502380] dhdsdio_membytes: write 2048 bytes at offset 0x00006800 in
window 0x00008000
<4>[16383.502868] dhdsdio_membytes: write 2048 bytes at offset 0x00007000 in
window 0x00008000
<4>[16383.503295] dhdsdio_membytes: write 2048 bytes at offset 0x00007800 in
window 0x00008000
<4>[16383.503784] dhdsdio_membytes: write 2048 bytes at offset 0x00000000 in
window 0x00010000
<4>[16383.504241] dhdsdio_membytes: write 2048 bytes at offset 0x00000800 in
window 0x00010000
<4>[16383.504730] dhdsdio_membytes: write 2048 bytes at offset 0x00001000 in
window 0x00010000
<4>[16383.505126] dhdsdio_membytes: write 2048 bytes at offset 0x00001800 in
window 0x00010000
<4>[16383.505615] dhdsdio_membytes: write 2048 bytes at offset 0x00002000 in
window 0x00010000
<4>[16383.506103] dhdsdio_membytes: write 2048 bytes at offset 0x00002800 in
window 0x00010000
<4>[16383.506500] dhdsdio_membytes: write 2048 bytes at offset 0x00003000 in
window 0x00010000
<4>[16383.507019] dhdsdio_membytes: write 2048 bytes at offset 0x00003800 in
window 0x00010000
<4>[16383.507507] dhdsdio_membytes: write 2048 bytes at offset 0x00004000 in
window 0x00010000
<4>[16383.507995] dhdsdio_membytes: write 2048 bytes at offset 0x00004800 in
window 0x00010000
<4>[16383.508392] dhdsdio_membytes: write 2048 bytes at offset 0x00005000 in
window 0x00010000
<4>[16383.508850] dhdsdio_membytes: write 2048 bytes at offset 0x00005800 in
window 0x00010000
<4>[16383.509338] dhdsdio_membytes: write 2048 bytes at offset 0x00006000 in
window 0x00010000
<4>[16383.509826] dhdsdio_membytes: write 2048 bytes at offset 0x00006800 in
window 0x00010000
<4>[16383.510223] dhdsdio_membytes: write 2048 bytes at offset 0x00007000 in
window 0x00010000
<4>[16383.510711] dhdsdio_membytes: write 2048 bytes at offset 0x00007800 in
window 0x00010000
<4>[16383.511169] dhdsdio_membytes: write 2048 bytes at offset 0x00000000 in
window 0x00018000
<4>[16383.511596] dhdsdio_membytes: write 2048 bytes at offset 0x00000800 in
window 0x00018000
<4>[16383.512084] dhdsdio_membytes: write 2048 bytes at offset 0x00001000 in
window 0x00018000
<4>[16383.512542] dhdsdio_membytes: write 2048 bytes at offset 0x00001800 in
window 0x00018000
<4>[16383.513031] dhdsdio_membytes: write 2048 bytes at offset 0x00002000 in
window 0x00018000
<4>[16383.513427] dhdsdio_membytes: write 2048 bytes at offset 0x00002800 in
window 0x00018000
<4>[16383.513916] dhdsdio_membytes: write 2048 bytes at offset 0x00003000 in
window 0x00018000
<4>[16383.514434] dhdsdio_membytes: write 2048 bytes at offset 0x00003800 in
window 0x00018000
<4>[16383.514862] dhdsdio_membytes: write 2048 bytes at offset 0x00004000 in
window 0x00018000
<4>[16383.515319] dhdsdio_membytes: write 2048 bytes at offset 0x00004800 in
window 0x00018000
<4>[16383.515808] dhdsdio_membytes: write 2048 bytes at offset 0x00005000 in
window 0x00018000
<4>[16383.516265] dhdsdio_membytes: write 2048 bytes at offset 0x00005800 in
window 0x00018000
<4>[16383.516693] dhdsdio_membytes: write 2048 bytes at offset 0x00006000 in
window 0x00018000
<4>[16383.517150] dhdsdio_membytes: write 2048 bytes at offset 0x00006800 in
window 0x00018000
<4>[16383.517639] dhdsdio_membytes: write 2048 bytes at offset 0x00007000 in
window 0x00018000
<4>[16383.518066] dhdsdio_membytes: write 2048 bytes at offset 0x00007800 in
window 0x00018000
<4>[16383.518524] dhdsdio_membytes: write 2048 bytes at offset 0x00000000 in
window 0x00020000
<4>[16383.518981] dhdsdio_membytes: write 2048 bytes at offset 0x00000800 in
window 0x00020000
<4>[16383.519470] dhdsdio_membytes: write 2048 bytes at offset 0x00001000 in
window 0x00020000
<4>[16383.519897] dhdsdio_membytes: write 2048 bytes at offset 0x00001800 in
window 0x00020000
<4>[16383.520355] dhdsdio_membytes: write 2048 bytes at offset 0x00002000 in
window 0x00020000
<4>[16383.520843] dhdsdio_membytes: write 2048 bytes at offset 0x00002800 in
window 0x00020000
<4>[16383.521240] dhdsdio_membytes: write 2048 bytes at offset 0x00003000 in
window 0x00020000
<4>[16383.521728] dhdsdio_membytes: write 2048 bytes at offset 0x00003800 in
window 0x00020000
<4>[16383.522216] dhdsdio_membytes: write 2048 bytes at offset 0x00004000 in
window 0x00020000
<4>[16383.522705] dhdsdio_membytes: write 2048 bytes at offset 0x00004800 in
window 0x00020000
<4>[16383.523132] dhdsdio_membytes: write 2048 bytes at offset 0x00005000 in
window 0x00020000
<4>[16383.523590] dhdsdio_membytes: write 2048 bytes at offset 0x00005800 in
window 0x00020000
<4>[16383.524078] dhdsdio_membytes: write 2048 bytes at offset 0x00006000 in
window 0x00020000
<4>[16383.524536] dhdsdio_membytes: write 2048 bytes at offset 0x00006800 in
window 0x00020000
<4>[16383.524963] dhdsdio_membytes: write 2048 bytes at offset 0x00007000 in
window 0x00020000
<4>[16383.525421] dhdsdio_membytes: write 2048 bytes at offset 0x00007800 in
window 0x00020000
<4>[16383.525909] dhdsdio_membytes: write 2048 bytes at offset 0x00000000 in
window 0x00028000
<4>[16383.526306] dhdsdio_membytes: write 2048 bytes at offset 0x00000800 in
window 0x00028000
<4>[16383.526794] dhdsdio_membytes: write 2048 bytes at offset 0x00001000 in
window 0x00028000
<4>[16383.527282] dhdsdio_membytes: write 2048 bytes at offset 0x00001800 in
window 0x00028000
<4>[16383.527740] dhdsdio_membytes: write 2048 bytes at offset 0x00002000 in
window 0x00028000
<4>[16383.528167] dhdsdio_membytes: write 2048 bytes at offset 0x00002800 in
window 0x00028000
<4>[16383.528625] dhdsdio_membytes: write 2048 bytes at offset 0x00003000 in
window 0x00028000
<4>[16383.529113] dhdsdio_membytes: write 2048 bytes at offset 0x00003800 in
window 0x00028000
<4>[16383.529510] dhdsdio_membytes: write 2048 bytes at offset 0x00004000 in
window 0x00028000
<4>[16383.529998] dhdsdio_membytes: write 2048 bytes at offset 0x00004800 in
window 0x00028000
<4>[16383.530517] dhdsdio_membytes: write 2048 bytes at offset 0x00005000 in
window 0x00028000
<4>[16383.530975] dhdsdio_membytes: write 2048 bytes at offset 0x00005800 in
window 0x00028000
<4>[16383.531402] dhdsdio_membytes: write 2048 bytes at offset 0x00006000 in
window 0x00028000
<4>[16383.531860] dhdsdio_membytes: write 2048 bytes at offset 0x00006800 in
window 0x00028000
<4>[16383.532348] dhdsdio_membytes: write 2048 bytes at offset 0x00007000 in
window 0x00028000
<4>[16383.532745] dhdsdio_membytes: write 2048 bytes at offset 0x00007800 in
window 0x00028000
<4>[16383.533386] dhdsdio_membytes: write 425 bytes at offset 0x00000000 in
window 0x00030000
<4>[16383.533996] dhdsdio_downloadvars: Enter
<4>[16383.534301] dhdsdio_membytes: write 1208 bytes at offset 0x00007b44 in
window 0x00040000
<4>[16383.534637] Compare NVRAM dl & ul; varsize=1208
<4>[16383.534820] dhdsdio_membytes: read 1208 bytes at offset 0x00007b44 in
window 0x00040000
<4>[16383.535217] dhdsdio_write_vars: Download, Upload and compare of NVRAM
succeeded.
<4>[16383.535369] Physical memory size: 294912, usable memory size: 294912
<4>[16383.535461] Vars are at 293700, orig varsize is 1208
<4>[16383.535614] New varsize is 1208, length token=0xfed1012e
<4>[16383.535766] dhdsdio_membytes: write 4 bytes at offset 0x00007ffc in
window 0x00040000
<4>[16383.536529] dhdsdio_clkctl: Enter
<4>[16383.536621] dhdsdio_htclk: Enter
<4>[16383.536743] CLKCTL: turned OFF
<4>[16383.536895] dhd_os_wd_timer: Enter
<4>[16383.536987] dhdsdio_clkctl: 3 -> 1
<4>[16383.537078] dhd_os_wd_timer: Enter
<4>[16383.537231] dhd_bus_init: Enter
<4>[16383.537322] dhdsdio_clkctl: Enter
<4>[16383.537384] dhdsdio_htclk: Enter
<4>[16384.312164] dhdsdio_htclk: HT Avail timeout (1000000): clkctl 0x50
<4>[16384.312499] dhdsdio_clkctl: 1 -> 1
<4>[16384.312683] dhd_bus_init: clock state is wrong. state = 1
<4>[16384.313049] dhdsdio_clkctl: Enter
<4>[16384.313232] dhdsdio_htclk: Enter
<4>[16385.100494] dhdsdio_htclk: HT Avail timeout (1000000): clkctl 0x50
<4>[16385.100830] dhdsdio_clkctl: 1 -> 1
<4>[16385.101226] dhdsdio_clkctl: Enter
<4>[16385.101440] dhd_bus_start failed bus is not ready
<4>[16385.101776] dhd_watchdog_thread:
<4>[16385.101959] dhd_bus_watchdog: Enter
<4>[16385.102172] dhdsdio_probe: dhd_bus_start failed
<4>[16385.102478] dhd_net_attach: ifidx 0
<4>[16385.112548] dhd_get_stats: Enter
<4>[16385.112823] Broadcom Dongle Host Driver: register interface
[wlan0]dhdsdio_probe : the lock is released.
As can be seen from the log, there is an issue turning the SDIO "backplane"
clock (htclk) back on after the firmware loads. However, if you try to load
the original firmware instead of bcm4330_sta.bcmon.bin with the bcmon version
of dhd.ko, the driver works fine, albeit with no monitor mode. I also tried
increasing the "HT Avail" timeout to 10 seconds instead of 1 second with the
same result.
Could it be an incompatibility issue with the firmware? Would it be possible
to post the firmware soure and build instructions as well?
Original issue reported on code.google.com by [email protected]
on 27 Sep 2012 at 1:43
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
Can't run as root 'su' failed
What version of the product are you using? On what operating system?
Android 4. Jelly
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 25 Dec 2013 at 4:54
Will you make bcmon working on nexus 7 2013?
Original issue reported on code.google.com by [email protected]
on 19 Jan 2014 at 10:38
What steps will reproduce the problem?
1. open bcmon app
2.
3.
What is the expected output? What do you see instead?
I just see : firmware model : not detected
installed tools version : 0
installed fw version : 0
What version of the product are you using? On what operating system?
android 2.3.6
I've installed busybox
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 29 Jan 2014 at 3:49
Monitoring mode on HTC HD2 with android 4.0.2,
is it possible?
Original issue reported on code.google.com by [email protected]
on 21 Feb 2013 at 1:55
What steps will reproduce the problem?
1. install bcmon
2. open bcmon
3. grant su permissions
What is the expected output? What do you see instead?
Expected output is all firmware installed!
What version of the product are you using? On what operating system?
latest version of bcmon.On android 4.1.1
Please provide any additional information below.
i want help!!urgently!thanks!
Original issue reported on code.google.com by [email protected]
on 8 Mar 2014 at 1:48
Monitor mode is ok
but all other fuctions dont work
App get fozen then hang
Original issue reported on code.google.com by [email protected]
on 5 Mar 2014 at 7:27
[deleted issue]
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Mostly stock gingerbread, rooted
Please provide any additional information below.
Firmware files are located in /system/etc/wifi and are:
bcm4329_aps.bin
bcm4329_mfg.bin
bcm4329_sta.bin
Original issue reported on code.google.com by [email protected]
on 17 Jul 2013 at 9:06
Doesn't work in Moto G
please, fix this.
Original issue reported on code.google.com by [email protected]
on 2 Mar 2014 at 1:15
I'm using a HTC sensation with CyanogenMod 9 and it features the BCM4329
chipset.
I installed the bcmon.apk and it installed smoothly.
When I press "Enable Monitor Mode" it just hangs for a moment and then nothing
happens.
I noticed that my wifi get's turned off and it won't turn on again without a
reboot of the phone.
Original issue reported on code.google.com by [email protected]
on 7 Aug 2013 at 6:33
With newest bcmon.apk and with older (2012) firmware for bcm4329 kernel driver,
there is an issue with packet injection only on reaver (even the one coming
with bcmon.apk).
Issue is presented by unable to inject packet (inject but newer actually left
wireless adapter) when using reaver and bcmon driver at HTC HD2.
In reaver there is stuck to Waiting for AP beacon (AP is close to HD2). After
skipping Association and association via areplay, reaver stuck on next
injection packet Try pin attempt ....
With aireplay bcmon works correctly and injected packets leave wifi adapter.
Original issue reported on code.google.com by [email protected]
on 25 Sep 2013 at 11:02
What steps will reproduce the problem?
1. When you input the following command "airodump-ng wlan0".
2.
3.
What is the expected output? What do you see instead?
I expect the characters to appear when typing. Nothing happens when I attempt
to type.
What version of the product are you using? On what operating system?
Cannot find the version but it was released on Jun 23, 2013.
Please provide any additional information below.
When you input the following command "airodump-ng wlan0",
typing in text will not work afterwards. The keyboard pops up fine and I
noticed I can enable functions like pause/resume output or resort/normal
sorting order, inputting text will not work. I also tried pressing "c"
as I've seen it is a key to enable typing. I've also noticed the white
rectangular box that is visible after the characters that are inputted is
not visible after the same command.
Original issue reported on code.google.com by [email protected]
on 11 Dec 2013 at 1:11
What steps will reproduce the problem?
1. Start bcmon
2. Enable Monitor mode
3. Run wash
What is the expected output? What do you see instead?
This is that I see:
bmon_wrapped_loaded
Wash v1.4 WiFi Protected Setup Scan Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner
<[email protected]>
[1] Illegal instruction PATH=/system/bin/...
What version of the product are you using? On what operating system?
Version: bcmon.apk Jun 23, 2013
OS: HTC Wildfire S A510e (marvel-1.09.0099, Android: 2.3.5, ROM:
cm-7-20120616-UNOFFICIAL-marvel.zip)
Please provide any additional information below.
I uninstalled the Terminal version included in the ROM CyanogenMod 7.2 and
installed the JackPal Terminal from Google Play but the problem continued.
Reviewing in some detail the behavior of the different bcmon options, I check
that "Run airodump" works properly, "Run wash" does not work, says something of
"Illegal Instruction" the same as "Run besside-ng." If I run "Run bcmon
terminal" terminal window opens with root user (prompt "#") and if I run any
command related to the injection and monitor mode it causes a response preceded
of one or more messages "bmon_wrapped_loaded" that sometimes end in "[1] +
Stopped (signal)" followed by the text of the particular command. The only
command that seems to work properly from the console is again airodump althoug
before "stabilize" the output with the list of visible networks show several
times the message "bmon_wrapped_loaded".
Original issue reported on code.google.com by [email protected]
on 16 Apr 2014 at 7:15
Attachments:
can't run as root su Failed
My mobile model is micromax canvas 2 and the version of android is
jellybean 4.2.1
Please tell which version of bcmon is suitable for my phone after
opening that bcmon only i can run rfa and check whether the wifi
crack is working or not
please help me in that
Thanks in Advance sir.
Original issue reported on code.google.com by [email protected]
on 27 Feb 2014 at 4:00
What steps will reproduce the problem?
1. Firmware model: Not detected
2.
3.
What is the expected output? What do you see instead?
Firmware model: Not detected
What version of the product are you using? On what operating system?
CyanogenMod 10-20121101-Nightly-p1
Please provide any additional information below.
The apps launches normaly, after having the status I have :
Firmware model: Not detected
installed Tools version: 0
installed fw version: 0
Original issue reported on code.google.com by [email protected]
on 22 Jul 2013 at 11:05
How I can know my chipset on android ?
I have CT1010 tablet
Original issue reported on code.google.com by [email protected]
on 4 Jan 2013 at 12:41
Is it a bug?
The testing phone is HTC desire:
I tested a lot and found it only supported Android versions older than 4.0.4,
with two necessary files named
/system/vendor/firmware/fw_bcm4329.bin and
/system/vendor/firmware/fw_bcm4329_apsta.bin.
Original issue reported on code.google.com by [email protected]
on 31 Dec 2013 at 3:53
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 16 Mar 2013 at 4:03
root@nexus7-47767ab4:/usr/src/linux# make modules
SUBDIRS=drivers/net/wireless/bcmdhd CC [M]
drivers/net/wireless/bcmdhd/src/bcmsdio/sys/bcmsdh.o
In file included from drivers/net/wireless/bcmdhd/src/bcmsdio/sys/bcmsdh.c:41:0:
drivers/net/wireless/bcmdhd/src/dhd/sys/dhd_sec_feature.h:53:23: error:
operator '>=' has no left operand
drivers/net/wireless/bcmdhd/src/dhd/sys/dhd_sec_feature.h:60:23: error:
operator '>=' has no left operand
drivers/net/wireless/bcmdhd/src/dhd/sys/dhd_sec_feature.h:104:23: error:
operator '>=' has no left operand
make[1]: *** [drivers/net/wireless/bcmdhd/src/bcmsdio/sys/bcmsdh.o] Error 1
make: *** [_module_drivers/net/wireless/bcmdhd] Error 2
Original issue reported on code.google.com by sidhayn
on 29 Nov 2012 at 11:19
E/AndroidRuntime( 1121): FATAL EXCEPTION: main
E/AndroidRuntime( 1121): java.lang.RuntimeException: Unable to start activity Co
mponentInfo{com.bcmon.bcmon/com.bcmon.bcmon.MainActivity}: android.view.WindowMa
nager$BadTokenException: Unable to add window -- token android.os.BinderProxy@40
51aaa8 is not valid; is your activity running?
E/AndroidRuntime( 1121): at android.app.ActivityThread.performLaunchActiv
ity(ActivityThread.java:1728)
E/AndroidRuntime( 1121): at android.app.ActivityThread.handleLaunchActivi
ty(ActivityThread.java:1747)
E/AndroidRuntime( 1121): at android.app.ActivityThread.access$1500(Activi
tyThread.java:155)
E/AndroidRuntime( 1121): at android.app.ActivityThread$H.handleMessage(Ac
tivityThread.java:993)
E/AndroidRuntime( 1121): at android.os.Handler.dispatchMessage(Handler.ja
va:130)
E/AndroidRuntime( 1121): at android.os.Looper.loop(SourceFile:351)
E/AndroidRuntime( 1121): at android.app.ActivityThread.main(ActivityThrea
d.java:3814)
E/AndroidRuntime( 1121): at java.lang.reflect.Method.invokeNative(Native
Method)
E/AndroidRuntime( 1121): at java.lang.reflect.Method.invoke(Method.java:5
38)
E/AndroidRuntime( 1121): at com.android.internal.os.ZygoteInit$MethodAndA
rgsCaller.run(ZygoteInit.java:901)
E/AndroidRuntime( 1121): at com.android.internal.os.ZygoteInit.main(Zygot
eInit.java:659)
E/AndroidRuntime( 1121): at dalvik.system.NativeStart.main(Native Method)
E/AndroidRuntime( 1121): Caused by: android.view.WindowManager$BadTokenException
: Unable to add window -- token android.os.BinderProxy@4051aaa8 is not valid; is
your activity running?
E/AndroidRuntime( 1121): at android.view.ViewRoot.setView(ViewRoot.java:5
64)
E/AndroidRuntime( 1121): at android.view.WindowManagerImpl.addView(Window
ManagerImpl.java:209)
E/AndroidRuntime( 1121): at android.view.WindowManagerImpl.addView(Window
ManagerImpl.java:123)
E/AndroidRuntime( 1121): at android.view.Window$LocalWindowManager.addVie
w(Window.java:455)
E/AndroidRuntime( 1121): at android.app.Dialog.show(Dialog.java:272)
E/AndroidRuntime( 1121): at android.app.AlertDialog$Builder.show(AlertDia
log.java:849)
E/AndroidRuntime( 1121): at com.bcmon.bcmon.Manager.checkAndInstallBusyBo
x(Manager.java:470)
E/AndroidRuntime( 1121): at com.bcmon.bcmon.MainActivity.onCreate(MainAct
ivity.java:51)
E/AndroidRuntime( 1121): at android.app.Instrumentation.callActivityOnCre
ate(Instrumentation.java:1082)
E/AndroidRuntime( 1121): at android.app.ActivityThread.performLaunchActiv
ity(ActivityThread.java:1692)
E/AndroidRuntime( 1121): ... 11 more
W/ActivityManager( 169): Force finishing activity com.bcmon.bcmon/.MainActivi
ty
Original issue reported on code.google.com by [email protected]
on 25 Sep 2013 at 4:35
Is anyone working on this? And i apologize for my pervious post. Also how do I
setup the drives. Is there a good tutorial around?
Original issue reported on code.google.com by [email protected]
on 4 Dec 2012 at 3:49
hi wanted to know if Google Nexus 7 (2013) works with bcmon?
You can give me an answer please
thank you very much
Original issue reported on code.google.com by [email protected]
on 17 Jan 2014 at 11:33
What steps will reproduce the problem?
1. I'm opening the bcmon app
2. I'm getting asket if I want to install the firmware and the Tools
3. I click on yes
4. I'm returning to the Android desktop (Superuser rights have been given)
What is the expected output? What do you see instead?
I'm returning back to Desktop
What version of the product are you using? On what operating system?
On Android 4.0.3
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 29 Aug 2013 at 7:13
What steps will reproduce the problem?
1. Copy your sources to drivers/net/wireless/bcm4329/
2. Enable BCM4329 [=m] in menuconfig
3. Try to build using make
What is the expected output?
CC [M] drivers/net/wireless/bcm4329/bcmsdh_linux.o
What do you see instead?
CC [M] drivers/net/wireless/bcm4329/bcmsdh_linux.o
drivers/net/wireless/bcm4329/bcmsdh_linux.c: In function
'bcmsdh_register_oob_intr':
drivers/net/wireless/bcm4329/bcmsdh_linux.c:639:3: error: implicit declaration
of function 'set_irq_wake' [-Werror=implicit-function-declaration]
cc1: all warnings being treated as errors
What version of the product are you using? On what operating system?
Svn trunk at revision 11, kernel Linux/arm 3.0.48-ck1, toolchain
linaro-android_toolchain-4.7-2012.07
Please provide any additional information below.
Looking at original bcm4329_248/bcmsdh_linux.c file I found that we need to add
only one line to fix this warning. Patch attached.
Original issue reported on code.google.com by [email protected]
on 28 Oct 2012 at 12:31
Attachments:
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.