scitools / iris-grib Goto Github PK
View Code? Open in Web Editor NEWGRIB interface for Iris.
Home Page: https://iris-grib.readthedocs.io/
License: BSD 3-Clause "New" or "Revised" License
GRIB interface for Iris.
Home Page: https://iris-grib.readthedocs.io/
License: BSD 3-Clause "New" or "Revised" License
I'm having a problem importing iris_grib in Python3:
>>> import iris_grib
[...]
No module named 'gribapi_swig'
However, installing grib_api with --enable-python didn't complain ...
Any ideas what might be the issue?
When a cube with a masked array is saved, if the masked array does not have a fill value specified, it will use the numpy default value which hass dtype np.float64
. This may be inconsistent with the dtype of the array itself, and when the array is filled (here) it will be filled with a value that has the dtype of the array (e.g. np.float32). This will then be inconsistent with the fill value described on this line which will then cause the data to be saved incorrectly.
Changing this line to the following seems to fix this problem:
fill_value = float(np.array(cube.data.fill_value, dtype=cube.data.dtype))
Iris-grib is available for Windows systems but it relies on gribapi and sooner or later ecCodes. However neither of those packages are available for a Windows environment with Python support? Am I missing something or is there a reason why you can load this package into a Windows environment even though it requires something that you cannot?
It seems save_grib2 can't accept Cubelists despite the documentation suggesting that it can. @pp-mo suggested this code may have been copied and modified from somewhere else, hence the mistake. He also suggested that it should be possible to save a Cubelist but that will require changes to the code.
For now I'd suggest changing the comments at under save_grib2 and possibly change the underlying code later.
It might be worth keeping an eye out for similar documentation mistakes elsewhere and seeing if there are other code changes needed.
I'have compiled and installed GRIB API but the python package installed is named grib_api
while iris-grib
looks for gribapi
. What am I supposed to do?
I think iris-grib might be setting value of the lengthOfTimeRange
key incorrectly when saving cubes with a statistic (cell method) over time. According to the GRIB spec, the definition of this key (as used in PDT4.8, PDT4.10 and PDT4.11) is:
Length of the time range over which statistical processing is done, in units defined by the previous octet
To me, this sounds like the interval of the cell method. For example, in the following case, I'd have expected this key to be set to one hour:
Cell methods:
mean: time (1 hour)
Instead, the value of this key is currently being set as the difference between lower and upper bound of the cube's time coordinate point:
iris-grib/iris_grib/_save_rules.py
Lines 1006 to 1012 in 6901365
I'd appreciate others' input here โ is iris-grib
doing the right thing currently, or do we need to correct the above code?
Following #55, we need to enable docs building on this repo.
I think that means a bit more work with readthedocs, to sort out an scitools organisation account and possibly to get to build docs for tagged release versions.
It will then maintain docs for different versions with a dropdown control (and a 'latest' concept), which if you care about it seems to be a key benefit from readthedocs.
Revert #106 !
I think this change was a misunderstanding : the test data does not show clearly that these were the wrong numbers -- but other (real) data since encountered does.
( N.B. the actual Grib spec is really vague on this, hence the interpretation depended on what I found in actual files ! )
Hey guys @bjlittle @corinnebosley here's one for you after the bank holiday weekend ๐
Installing iris-grib
and iris=1.13
in a conda environment is not working unless iris-grib
is restricted to an old version. See e.g.:
---
name: cdds_free
channels:
- conda-forge
dependencies:
- iris=1.13
- iris-grib
This will install iris=1.13
and iris-grib=0.12
and the env will be created no problemo, but the env is not functional since iris-grib
wants iris._lazy_data
which is available only in iris>=2.
Just a heads up you guys need to tweak a bit the conda dependencies file for iris-grib ๐บ
Raised in SciTools/iris#2768, complete with offending grib file.
Trying to convert the n48-multi-field
FF from the Iris test data repo fails:
cubes = iris.load('n48-multi-field')
>>> iris.save(cubes, test.grib2)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
NameError: name 'test' is not defined
>>> iris.save(cubes, 'test.grib2')
GRIB_API ERROR : Key "forecastTime": Trying to encode a negative value of -3 for key of type unsigned
Traceback (most recent call last):
..
File "/.../gribapi/__init__.py", line 143, in GRIB_CHECK
raise GribInternalError(errid)
gribapi.GribInternalError: Encoding invalid
Hi, I have some apparently improperly defined hybrid level GRIB2 files here:
# Hybrid level (grib2/tables/5/4.5.table)
typeOfFirstFixedSurface = 105;
#-READ ONLY- unitsOfFirstFixedSurface = unknown;
#-READ ONLY- nameOfFirstFixedSurface = Hybrid level;
scaleFactorOfFirstFixedSurface = 0;
scaledValueOfFirstFixedSurface = 1;
# Missing (grib2/tables/5/4.5.table)
typeOfSecondFixedSurface = 255;
#-READ ONLY- unitsOfSecondFixedSurface = unknown;
#-READ ONLY- nameOfSecondFixedSurface = Missing;
scaleFactorOfSecondFixedSurface = MISSING;
scaledValueOfSecondFixedSurface = MISSING;
Obviously there is no way of correctly assigning pressure or anything to these surfaces, but it would still be very helpful if they could be parsed as a single cube with scaledValueOfFirstFixedSurface
specifiying the third dimension coordinate. Instead they come out as individual 2-dim cubes:
air_pressure / (Pa) (projection_y_coordinate: 429; projection_x_coordinate: 499)
Dimension coordinates:
projection_y_coordinate x -
projection_x_coordinate - x
Scalar coordinates:
forecast_period: 1 hours
forecast_reference_time: 2018-08-31 23:00:00
time: 2018-09-01 00:00:00
Is there a workaround for this?
Version 1.16 is available, but currently causes us some failures.
Eventually we'll presumably want to throw this away and replace with eccodes, but it isn't clear when that will be appropriate : See #58
First, the traceback:
File "/data/pelson/conda/envs/data-transform/lib/python2.7/site-packages/iris_grib/_load_convert.py", line 1634, in generating_process
if options.warn_on_unsupported:
AttributeError: 'thread._local' object has no attribute 'warn_on_unsupported'
There is some weird interaction between the pickled function and the way the function is called with dask. Essentially, I think iris-grib is relying on the _load_convert having been run, but that isn't necessarily the case when pickling/unpickling the function (or at least, the local it is referencing isn't the one that the thread has run the module on). This is a somewhat woolly description ๐.
Rather than depending on the module having been run, we either need to ensure that we validate the threading.local has been correctly configured, or just ditch the complexity. I don't currently see the usecase for having warn_on_unsupported be defined on a per-thread basis. The implementation of this was originally done in SciTools/iris@0248bf3, and for all of those tests, I believe a module level constant would suffice.
Created from SciTools/iris using https://gist.github.com/rhattersley/406fc67f540fb7a239b8a88672b529e8
I.e. where it currently states ".. deprecated:: 1.6" or whatever, we should change to the relevant iris-grib version.
No deprecations!
This is presumably the future, and should replace "gribapi".
https://software.ecmwf.int/wiki/display/ECC/ecCodes+Home
N.B. latest declaration says this is currently "in beta", so maybe not quite ready
A grab-bag of known issues we'd like to get round to "some time"
PLEASE ADD ANY YOU LIKE...
iris_grib.message.GribMessage
insteadGribMessage
to add 'create from template' and 'write to file'.GribMessage
, and rearrange sectionally (like load rules)Hi there,
I got a TranslationError
reporting mercator is an unhandled grid type.
Does this mean that mercator grid in general is not supported by iris-grib?
Thanks!
> File "iris-plot.py", line 21, in plotit
> cubelist = iris.load(gribpath)
> File "/home/miniconda2/lib/python2.7/site-packages/iris/__init__.py", line 341, in load
> return _load_collection(uris, constraints, callback).merged().cubes()
> File "/home/miniconda2/lib/python2.7/site-packages/iris/__init__.py", line 311, in _load_collection
> result = iris.cube._CubeFilterCollection.from_cubes(cubes, constraints)
> File "/home/miniconda2/lib/python2.7/site-packages/iris/cube.py", line 144, in from_cubes
> for cube in cubes:
> File "/home/miniconda2/lib/python2.7/site-packages/iris/__init__.py", line 298, in _generate_cubes
> for cube in iris.io.load_files(part_names, callback, constraints):
> File "/home/miniconda2/lib/python2.7/site-packages/iris/io/__init__.py", line 201, in load_files
> for cube in handling_format_spec.handler(fnames, callback):
> File "/home/miniconda2/lib/python2.7/site-packages/iris/fileformats/rules.py", line 1047, in load_cubes
> user_callback_wrapper=loadcubes_user_callback_wrapper):
> File "/home/miniconda2/lib/python2.7/site-packages/iris/fileformats/rules.py", line 960, in _load_pairs_from_fields_and_filenames
> for field, filename in fields_and_filenames:
> File "/home/miniconda2/lib/python2.7/site-packages/iris/fileformats/rules.py", line 1024, in _generate_all_fields_and_filenames
> filename, **loader.field_generator_kwargs):
> File "/home/miniconda2/lib/python2.7/site-packages/iris_grib/__init__.py", line 700, in _load_generate
> message = GribWrapper(message_id, grib_fh=grib_fh)
> File "/home/miniconda2/lib/python2.7/site-packages/iris_grib/__init__.py", line 170, in __init__
> self._compute_extra_keys()
> File "/home/miniconda2/lib/python2.7/site-packages/iris_grib/__init__.py", line 460, in _compute_extra_keys
> raise TranslationError("unhandled grid type: {}".format(gridType))
> iris.exceptions.TranslationError: unhandled grid type: mercator
All the grib2 load rules in iris_grib._load_convert
are written in terms of the sectionally-structured GribMessage
object.
But all the save rules (iris_grib._save_rules
) use the gribapi (and/or eccodes) instead
Technical Debt summary:
fix:
costs of the legacy support :
GribMessage
object :
To fix:
GribMessage
from a gribapi template, and save it to a file.GribMessage
s instead of a gribapi handle.Greetings,
Input
conda install -c conda-forge iris-grib
Traceback
Collecting package metadata (current_repodata.json): done
Solving environment: failed
Collecting package metadata (repodata.json): done
Solving environment: failed
UnsatisfiableError: The following specifications were found to be incompatible with each other:
- pkgs/main/linux-64::anaconda==2019.03=py37_0 -> importlib_metadata==0.8=py37_0
- pkgs/main/linux-64::anaconda==2019.03=py37_0 -> pango==1.42.4=h049681c_0
- pkgs/main/linux-64::importlib_metadata==0.8=py37_0
- pkgs/main/linux-64::pango==1.42.4=h049681c_0
- pkgs/main/linux-64::path.py==11.5.0=py37_0 -> importlib_metadata[version='>=0.5']
What could possibly explain this predicatement? Similarly, the exact same error occurs when conda installing eccodes.
Thank you!
Update the GRIB2 tables to a more recent version, as necessary.
Note: ported directly (without any checks) from Iris
: see SciTools/iris#683
Summary : a solution like the 'STASH' attribute, to carry grib-specific parameter identity.
At present, if you want to save Iris data for which no known parameter code translation exists, it just gets a 0, so you can't save multiple such things to one file.
Likewise on load, an unknown parameter code just results in an 'unknown' or anonymous cube
-- and maybe we can even wind up merging things that should be kept separate ??
I'm imagining a specially recognised cube attribute, along the lines of 'STASH' for PP+FF encoding.
It needs to encode : (edition, discipline parameterCategory, parameterNumber). We can probably handle GRIB1 in that form somehow, not clear on detail yet.
The GRIB1 load translation code (here) is still using GribWrapper
s, which is the only thing preventing us throwing all the old loader code away, including the GribWrapper class.
Technical Debt summary :
[
In fact this is still the bulk of code in iris_grib.__init__.py
, though no longer publicly exported.
CENTRE_TITLES
, TIME_RANGE_INDICATORS
, PROCESSING_TYPES
, TIME_CODES_EDITION1
and unknown_string
_longitude_is_cyclic
and _message_values
There is still a slippery kludge that means when you load a GRIB1 message the 'field' argument in a callback becomes a GribWrapper instead of a GribMessage (here).
So, this is now the only thing that GribWrapper is still used for, and the only remaining occasion that a user might possibly be concerned about what a GribWrapper looks like.
We haven't addressed this yet because GRIB1 usage is very low.
We should rewrite the Grib1 loader to use the modern message object + throw away all the old GribWrapper-based processing.
The docs (https://iris-grib.readthedocs.io/en/latest/ref/release_notes.html) have not been updated since 0.13.0.
It is suggested that the builds are failing due to the jobs running out of resources (readthedocs builds are limited to 1GB of memory and 15 minutes time see https://docs.readthedocs.io/en/stable/builds.html#build-process)
A possible solution that has been suggested would be to use pip to install iris rather than conda, apparently this saves some space?
Hi,
I am currently working with data from the ARPEGE model (downloadable from here: https://donneespubliques.meteofrance.fr/?fond=produit&id_produit=130&id_rubrique=51).
Several of their fields are cumulative or in some other way time averaged, but iris-grib
does not seem to be able to interpret them correctly. I don't know whether the files are not written according to the standard, or if it's a case that just hasn't occurred yet, but the following patch seems to do the trick:
--- a/iris_grib/_load_convert.py
+++ b/iris_grib/_load_convert.py
@@ -1661,6 +1661,11 @@ def statistical_forecast_period_coord(section, frt_coord):
# Get the period end time (as a timedelta relative to the frt).
end_time_delta = end_time - frt_point
+ if (end_time_delta.total_seconds() <= 0) and ('lengthOfTimeRange' in section.keys()):
+ # apparently the end time is not set correctly, replace it
+ # with a different key (needed e.g. for ARPEGE model)
+ time_range_seconds = forecast_units.convert(section['lengthOfTimeRange'], 'seconds')
+ end_time_delta = timedelta(seconds=time_range_seconds) + start_time_delta
# Get the middle of the period (as a timedelta relative to the frt).
# Note: timedelta division in 2.7 is odd. Even though we request integer
BTW, there are also a number of parameters which iris-grib
does not recognize. I manually hacked the GRIB2_TO_CF
list and the standard names check to make it work, but maybe someone who knows how the translation lists are generated could implement this properly?
Docs are suggesting conda for now.
However
Many other SciTools packages are now on PyPI, and we probably should support it as PyPI remains popular.
(from this comment])
There's a problem with the change added by #44: the function for processing pdt10 for saving has not been plumbed in to the product definition section function, so it will never be executed.
This does hint at the fact that we could do with some integration tests for loading and saving of grib files using iris_grib, as there's no way a unit test framework could ever be expected to pick up on this...
GRIB2_TO_CF is unused.
It was probably supposed to be used in _make_grib2_to_cf_table, line 199 (@pp-mo, is that correct?).
CF_TO_GRIB1Local and CFConstrained_TO_GRIB1Local are also unused.
Apologies, it was me who merged SciTools/iris#482. I will be more cautious when pressed for a hurried merge.
See Iris#2860 for remaining tests to be ported from Iris to Iris-grib.
This comment describes the principles wanted, that should deliver a more sensible Iris with no remaining dependencies on iris-grib (that is, even in the testing).
In addition this will be a good time to review the iris-grib codebase + weed out any remaining dependencies on private Iris api.
Hi there,
While I'm trying to handle each Grib2 message with iris-grib, I found there two messages with identical Grib2 parameter but discribing different phenomenon. How could I handle this in terms of putting the G2Param codes in the _grib_cf_map.py.
I attached the details of these two message below:
float Visibility_height_above_ground(time=1, height_above_ground1=1, lat=769, lon=1024);
:long_name = "Visibility @ Specified height level above ground";
:units = "m";
:description = "Visibility";
:missing_value = NaNf; // float
:grid_mapping = "LatLon_Projection";
:coordinates = "reftime time height_above_ground1 lat lon ";
:Grib_Variable_Id = "VAR_0-19-0_L103";
:Grib2_Parameter = 0, 19, 0; // int
:Grib2_Parameter_Discipline = "Meteorological products";
:Grib2_Parameter_Category = "Physical atmospheric properties";
:Grib2_Parameter_Name = "Visibility";
:Grib2_Level_Type = "Specified height level above ground";
:Grib2_Generating_Process_Type = "Analysis";
float Visibility_height_above_ground_probability_below_5000(time=1, height_above_ground1=1, lat=769, lon=1024);
:long_name = "Probability Visibility below_5000 m @ Specified height level above ground";
:units = "%";
:description = "Visibility";
:missing_value = NaNf; // float
:grid_mapping = "LatLon_Projection";
:coordinates = "reftime time height_above_ground1 lat lon ";
:Grib_Variable_Id = "VAR_0-19-0_L103_Prob_below_5000";
:Grib2_Parameter = 0, 19, 0; // int
:Grib2_Parameter_Discipline = "Meteorological products";
:Grib2_Parameter_Category = "Physical atmospheric properties";
:Grib2_Parameter_Name = "Visibility";
:Grib2_Level_Type = "Specified height level above ground";
:Grib2_Probability_Type = 0; // int
:Grib2_Probability_Name = "below_5000";
:Grib2_Generating_Process_Type = "Analysis";
Thanks!
Regards
Haipeng
Hi all,
I got a KeyError: "'codedValues' not defined in section 7"
when loading a grib2. I suspect it is raised because the file is somehow corrupt, because loading works on some files and does not on others.
I uploaded a sample file here, which raises the error for me: http://homepage.univie.ac.at/a1254888/ICON_EU_single_level_elements_CLCM_2018050512.grib2
It originates from a grib2 from opendata.dwd.de, which has been loaded with Iris, reduced in size (area) and saved. (on about 10-20% of all files the error is raised)
It is enough to do
cube = iris.load('ICON_EU_single_level_elements_CLCM_2018050512.grib2')[0]
cube.data
and the error is raised.
How should I load many files, not knowing which/if a file is corrupted?
For now I am iterating over all files and load them inside a try
-block. Does not seem to be a lot slower on ~300 files.
Would be great if you could share your comments on the problem.
Thanks!
Product definition template 4.60 is used by lots of the datasets in the ECMWF Mars system, including the S2S and Copernicus seasonal datasets which are growing increasingly important. Therefore support for this in iris-grib is becoming more necessary.
Details can be found in the WMO documentation:
Product definition template 4.60 - individual ensemble reforecast, control and perturbed, at a horizontal level or in a horizontal layer at a point in time
The github docs link is not yet viable.
It would be nice to be able to link to this from Iris docs.
Currently eccodes is only available on PyPI for windows: https://pypi.org/project/eccodes/#files
#141 amends the "install_requires" section of setup.py so that it only checks for eccodes if testing on windows. This means that users will not be able to install eccodes using pip; they will have to install using conda instead.
However, this is a TEMPORARY AMENDMENT ONLY and must be reversed when ECMWF release eccodes on PyPI for all platforms.
Ensure we can save non-integer levels (such as level=1.5m
) to GRIB.
Note: ported here from Iris - see SciTools/iris#675 for the original issue.
hi there,
While I was working with GRIB files, I found the need to add product_definition_template_5
. Partly this would repeat product_definition_template_9
but still be valuable to add from my view. My contribution will be like the follows with the option to optimise the repeated part (works for my local variables):
def product_definition_section(section, metadata, discipline, tablesVersion,
rt_coord):
...
# add template 5
elif template == 5:
probability = \
product_definition_template_5(section, metadata, rt_coord)
...
def product_definition_template_5(section, metadata, rt_coord):
"""
Set keys within the provided grib message based on Product
Definition Template 4.5.
Template 4.5 is used to represent a probability forecasts at a horizontal
level or in a horizontal layer at a point in time.
"""
# gribapi.grib_set(grib, "productDefinitionTemplateNumber", 5)
product_definition_template_0(section, metadata, rt_coord)
# NOTE: we currently don't record the nature of the underlying statistic,
# as we don't have an agreed way of representing that in CF.
# Return a probability object to control the production of a probability
# result. This is done once the underlying phenomenon type is determined,
# in 'translate_phenomenon'.
probability_typecode = section['probabilityType']
if probability_typecode == 0:
# Type is "above upper level".
threshold_value = section['scaledValueOfUpperLimit']
if threshold_value == _MDI:
msg = 'Product definition section 4 has missing ' \
'scaled value of upper limit'
raise TranslationError(msg)
threshold_scaling = section['scaleFactorOfUpperLimit']
if threshold_scaling == _MDI:
msg = 'Product definition section 4 has missing ' \
'scale factor of upper limit'
raise TranslationError(msg)
# Encode threshold information.
threshold = unscale(threshold_value, threshold_scaling)
probability_type = Probability('below_threshold', threshold)
elif probability_typecode == 1:
# Type is "above upper level".
threshold_value = section['scaledValueOfUpperLimit']
if threshold_value == _MDI:
msg = 'Product definition section 4 has missing ' \
'scaled value of upper limit'
raise TranslationError(msg)
threshold_scaling = section['scaleFactorOfUpperLimit']
if threshold_scaling == _MDI:
msg = 'Product definition section 4 has missing ' \
'scale factor of upper limit'
raise TranslationError(msg)
# Encode threshold information.
threshold = unscale(threshold_value, threshold_scaling)
probability_type = Probability('above_threshold', threshold)
# Note that GRIB provides separate "above lower threshold" and "above
# upper threshold" probability types. This naming style doesn't
# recognise that distinction. For now, assume this is not important.
else:
msg = ('Product definition section 4 contains an unsupported '
'probability type [{}]'.format(probability_typecode))
raise TranslationError(msg)
return probability_type
Could your guys please review and test from integration etc and see if this is worth to add?
Cheers
Haipeng
Release notes have not been updated since 0.14.0:
https://github.com/SciTools/iris-grib/blob/master/docs/ref/release_notes.rst
Hi, I tried to load a grib2 containing 'Low Cloud Cover (800 hPa - Soil)' from opendata.dwd.de.
This raises a TranslationError: Product definition section 4 has different types of first and second fixed surface.
I don't see why this should be a problem, can anyone clear things up? Thanks!
grib_dump shows
#-Unknown code table entry ()
typeOfFirstFixedSurface = 100;
#-READ ONLY- unitsOfFirstFixedSurface = 100;
#-READ ONLY- nameOfFirstFixedSurface = 100;
scaleFactorOfFirstFixedSurface = 0;
scaledValueOfFirstFixedSurface = 80000;
#-Unknown code table entry ()
typeOfSecondFixedSurface = 1;
#-READ ONLY- unitsOfSecondFixedSurface = 1;
#-READ ONLY- nameOfSecondFixedSurface = 1;
scaleFactorOfSecondFixedSurface = 0;
scaledValueOfSecondFixedSurface = 0;
topLevel = 800;
bottomLevel = 0;
shortNameECMF = ccl;
shortName = CLCL;
nameECMF = Cloud cover;
name = Cloud Cover (800 hPa - Soil);
Am trying to load a grib2 file and am getting the error 'iris.exceptions.TranslationError: Grid definition section 3 contains unsupported source of grid definition [12]'
Grib header for record 1 listed below..
Grib header is:
GRIB {
# Meteorological products (grib2/tables/4/0.0.table)
discipline = 0;
editionNumber = 2;
# U.K. Met Office - Exeter (common/c-11.table)
centre = 74;
subCentre = 0;
# Start of forecast (grib2/tables/4/1.2.table)
significanceOfReferenceTime = 1;
dataDate = 20190225;
dataTime = 1200;
# Operational products (grib2/tables/4/1.3.table)
productionStatusOfProcessedData = 0;
# Analysis and forecast products (grib2/tables/4/1.4.table)
typeOfProcessedData = 2;
numberOfDataPoints = 385792;
# There is no appended list (grib2/tables/4/3.11.table)
interpretationOfNumberOfPoints = 0;
# Unknown code table entry (grib2/tables/4/3.1.table)
gridDefinitionTemplateNumber = 12;
# Earth assumed oblate spheroid with major and minor axes specified by data producer (grib2/tables/4/3.2.table)
shapeOfTheEarth = 3;
Ni = 548;
Nj = 704;
latitudeOfReferencePointInDegrees = 4.9e-05;
longitudeOfReferencePointInDegrees = -2e-06;
XRInMetres = 400000;
YRInMetres = -100000;
iScansNegatively = 0;
jScansPositively = 1;
jPointsAreConsecutive = 0;
alternativeRowScanning = 0;
DiInMetres = 2000;
DjInMetres = 2000;
X1InGridLengths = -238000;
Y1InGridLengths = 1.222e+06;
X2InGridLengths = 856000;
Y2InGridLengths = -184000;
gridType = transverse_mercator;
NV = 0;
# Analysis or forecast at a horizontal level or in a horizontal layer at a point in time (grib2/tables/4/4.0.table)
productDefinitionTemplateNumber = 0;
# Temperature (grib2/tables/4/4.1.0.table)
parameterCategory = 0;
# Temperature (K) (grib2/tables/4/4.2.0.0.table)
parameterNumber = 0;
#-READ ONLY- parameterUnits = K;
#-READ ONLY- parameterName = Temperature ;
# Analysis (grib2/tables/4/4.3.table)
typeOfGeneratingProcess = 0;
generatingProcessIdentifier = 1;
# Minute (grib2/tables/4/4.4.table)
indicatorOfUnitOfTimeRange = 0;
# Hour (stepUnits.table)
stepUnits = 1;
forecastTime = 0;
stepRange = 0;
# Specified height level above ground (m) (grib2/tables/4/4.5.table)
typeOfFirstFixedSurface = 103;
#-READ ONLY- unitsOfFirstFixedSurface = m;
scaleFactorOfFirstFixedSurface = 0;
scaledValueOfFirstFixedSurface = 1;
# Missing (grib2/tables/4/4.5.table)
typeOfSecondFixedSurface = 255;
#-READ ONLY- unitsOfSecondFixedSurface = unknown;
#-READ ONLY- nameOfSecondFixedSurface = Missing;
scaleFactorOfSecondFixedSurface = MISSING;
scaledValueOfSecondFixedSurface = MISSING;
level = 1;
shortNameECMF = t;
shortName = t;
nameECMF = Temperature;
name = Temperature;
cfNameECMF = air_temperature;
cfName = air_temperature;
cfVarNameECMF = t;
cfVarName = t;
#-READ ONLY- modelName = unknown;
numberOfValues = 385792;
packingType = grid_simple;
I've just been tracking down an issue where I believe significanceOfReferenceTime = 0;
is being incorrectly interpreted. According to the TIME RANGE INDICATOR
docs I would interpret a significanceOfReferenceTime as a forecast_reference_time
, not a validity time
.
This change was introduced in iris at https://github.com/SciTools/iris/pull/1903/files#diff-e831265b91970d39925897dda02564a6R275 (ping @marqh).
Currently we support fewer encoding for writing than reading.
But I think that we can currently read anything that we can write (i.e. not obvious, but it happens to be so).
It could simplify understanding if we always provided both read and write for all templates we support.
-- that is, we'd add write support for everything we can read.
This should not be too hard, as once you have knowledge of the encoding, the reverse should be easy : whereas reading may have to reject odd extended options that we don't support, writing is not complicated by that.
This should cover grid as well as data definition templates (i.e. section 3 and section 4 templates).
I'm trying to read Climate Forecast System Reanalysis (CFSR) grib files and getting the KeyError: "'editionNumber' not defined in section 0"
error. I'm guessing is a grib definition problem. When using grib_dump I get the following:
***** FILE: /Volumes/RV_Passport/CFSR/vertical_wind/197901010000_vertical_wind_pgbh.grb2
ECCODES ERROR : grib_parser: syntax error at line 18 of /Users/raulvalenzuela/miniconda2/share/grib_api/definitions/grib2/section.0.def
ECCODES ERROR : ecCodes Version: 2.8.0
#============== MESSAGE 1 ( length=-9999 ) ==============
ECCODES ERROR : Key/value not found
Is there any way I can fix this?
The grib saver used by iris (iris-grib, grib_api) does not save any attributes of cubes, with the exception of the attribute: 'centre = Met Office', which can then not be loaded back in.
Hi,
we are working a lot with different NWP models, and I was hoping iris-grib
would be the glue to join the NetCDF and GRIB worlds. I already have some homebrew classes to deal with this mess, but of course it would be much more attractive to leverage the power of iris
for this job. However, after installing from conda
ecmwf_grib 1.23.1 0 conda-forge
iris 1.13.0 py27_1 conda-forge
iris-grib 0.10.1 py27_0 conda-forge
python-ecmwf_grib 1.23.1 py27_0 conda-forge
I still get a lot of unknown fields for most of our GRIB data (examples for GFS-4, ECMWF and Environment Canada GDPS appended). These fields check out fine when I run e.g. grib_ls
in the command line, where grib_info
also points to the exact conda environment I run the Python code from:
grib_api Version 1.23.1
Default definition files path is used: /user/martin/.conda/envs/dev/share/grib_api/definitions
Can anyone explain this effect? I'm quite motivated to help getting this thing to fly, but I would appreciate someone pointing me in the right direction first.
Another (probably related?) issue is that for e.g. the GFS-4 in my example, I get like 10 cubes of y_wind
having the exact same metadata. In reality, they differ in levelType
. Can I somehow tell the load function to attach the levelType
(and/or any other parameters I'm interested in) to the cube as a meta-parameter? Or is the philosophy here to fiddle with the GribMessages
on a low level and then call load_pairs_from_fields
?
Best Regards,
Martin
From @cbridge2 on September 27, 2017 2:14
Hi Iris developers,
I tried to load an ECMWF daily climatology grib1 file using Iris 1.12.0:
clim = iris.load('era_clim_mslp_jan01.grib')
And got the following problem:
/projects/access/apps/pythonlib/iris/1.12.0/lib/python2.7/site-packages/Iris-1.12.0-py2.7-linux-x86_64.egg/iris/__init__.pyc in load(uris, constraints, callback)
339
340 """
--> 341 return _load_collection(uris, constraints, callback).merged().cubes()
342
343
/projects/access/apps/pythonlib/iris/1.12.0/lib/python2.7/site-packages/Iris-1.12.0-py2.7-linux-x86_64.egg/iris/__init__.pyc in _load_collection(uris, constraints, callback)
309 try:
310 cubes = _generate_cubes(uris, callback, constraints)
--> 311 result = iris.cube._CubeFilterCollection.from_cubes(cubes, constraints)
312 except EOFError as e:
313 raise iris.exceptions.TranslationError(
/projects/access/apps/pythonlib/iris/1.12.0/lib/python2.7/site-packages/Iris-1.12.0-py2.7-linux-x86_64.egg/iris/cube.pyc in from_cubes(cubes, constraints)
142 pairs = [_CubeFilter(constraint) for constraint in constraints]
143 collection = _CubeFilterCollection(pairs)
--> 144 for cube in cubes:
145 collection.add_cube(cube)
146 return collection
/projects/access/apps/pythonlib/iris/1.12.0/lib/python2.7/site-packages/Iris-1.12.0-py2.7-linux-x86_64.egg/iris/__init__.pyc in _generate_cubes(uris, callback, constraints)
296 if scheme == 'file':
297 part_names = [x[1] for x in groups]
--> 298 for cube in iris.io.load_files(part_names, callback, constraints):
299 yield cube
300 elif scheme in ['http', 'https']:
/projects/access/apps/pythonlib/iris/1.12.0/lib/python2.7/site-packages/Iris-1.12.0-py2.7-linux-x86_64.egg/iris/io/__init__.pyc in load_files(filenames, callback, constraints)
199 yield cube
200 else:
--> 201 for cube in handling_format_spec.handler(fnames, callback):
202 yield cube
203
/projects/access/apps/pythonlib/iris/1.12.0/lib/python2.7/site-packages/Iris-1.12.0-py2.7-linux-x86_64.egg/iris/fileformats/rules.pyc in load_cubes(filenames, user_callback, loader, filter_function)
1045 all_fields_and_filenames,
1046 converter=loader.converter,
-> 1047 user_callback_wrapper=loadcubes_user_callback_wrapper):
1048 yield cube
1049
/projects/access/apps/pythonlib/iris/1.12.0/lib/python2.7/site-packages/Iris-1.12.0-py2.7-linux-x86_64.egg/iris/fileformats/rules.pyc in _load_pairs_from_fields_and_filenames(fields_and_filenames, converter, user_callback_wrapper)
958 concrete_reference_targets = {}
959 results_needing_reference = []
--> 960 for field, filename in fields_and_filenames:
961 # Convert the field to a Cube, passing down the 'converter' function.
962 cube, factories, references = _make_cube(field, converter)
/projects/access/apps/pythonlib/iris/1.12.0/lib/python2.7/site-packages/Iris-1.12.0-py2.7-linux-x86_64.egg/iris/fileformats/rules.pyc in _generate_all_fields_and_filenames()
1022 for filename in filenames:
1023 for field in loader.field_generator(
-> 1024 filename, **loader.field_generator_kwargs):
1025 # evaluate field against format specific desired attributes
1026 # load if no format specific desired attributes are violated
/projects/access/apps/pythonlib/iris_grib/0.9.1/lib/python2.7/site-packages/iris_grib-0.9.1-py2.7.egg/iris_grib/__init__.pyc in _load_generate(filename)
698 message_id = message._raw_message._message_id
699 grib_fh = message._file_ref.open_file
--> 700 message = GribWrapper(message_id, grib_fh=grib_fh)
701 elif editionNumber != 2:
702 emsg = 'GRIB edition {} is not supported by {!r}.'
/projects/access/apps/pythonlib/iris_grib/0.9.1/lib/python2.7/site-packages/iris_grib-0.9.1-py2.7.egg/iris_grib/__init__.pyc in __init__(self, grib_message, grib_fh)
168 self.extra_keys = {}
169 self._confirm_in_scope()
--> 170 self._compute_extra_keys()
171
172 # Calculate the data payload shape.
/projects/access/apps/pythonlib/iris_grib/0.9.1/lib/python2.7/site-packages/iris_grib-0.9.1-py2.7.egg/iris_grib/__init__.pyc in _compute_extra_keys(self)
315 self.extra_keys['_referenceDateTime'] = \
316 datetime.datetime(int(self.year), int(self.month), int(self.day),
--> 317 int(self.hour), int(self.minute))
318
319 # forecast time with workarounds
ValueError: year is out of range
I have attached the offending file:
Inspecting the file with gripapi there is no explicit mention of 'year' which may make sense for a climatology file but, I guess, could make Iris unhappy if it is expecting a date with a year. Any suggestions much appreciated. (For now I have read the data in using gribapi and attached it to a 'handmade' cube as the 'data' attribute.)
Cheers,
Chris
Copied from original issue: SciTools/iris#2768
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.